@article{MTMT:32724905,
	title = {Improvements of surface tribological properties by magnetic assisted ball burnishing},
	url = {https://m2.mtmt.hu/api/publication/32724905},
	author = {Kovács, Zsolt Ferenc and Viharos, Zsolt János and Kodácsy, János},
	doi = {10.1016/j.surfcoat.2022.128317},
	journal-iso = {SURF COAT TECH},
	journal = {SURFACE AND COATINGS TECHNOLOGY},
	volume = {437},
	unique-id = {32724905},
	issn = {0257-8972},
	year = {2022},
	eissn = {1879-3347},
	orcid-numbers = {Kovács, Zsolt Ferenc/0000-0002-6995-6508; Viharos, Zsolt János/0000-0002-9561-6857}
}

@article{MTMT:33014653,
	title = {Workpiece Dependency Exploration & Probabilistic Nonparametric Modelling of Vibration-Assisted Hybrid Micro-EDM Process},
	url = {https://m2.mtmt.hu/api/publication/33014653},
	author = {Singh, S. K. and Mali, H. S.},
	doi = {10.1007/s13369-022-06616-9},
	journal-iso = {ARAB J SCI ENG},
	journal = {ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING},
	unique-id = {33014653},
	issn = {2193-567X},
	abstract = {mu-EDM is one of the leading process used to fabricate micro-parts and features that find application in wide array of products such as MEMS devices and lab-on-chip systems. To mitigate limitations of mu-EDM, hybridization of the process is done using vibration assistance. However, ambiguity remains as to the extent of effect of hybridization on different materials. In this work, experimentations are performed to explore and assess whether the benefits, and disadvantages, of hybridization are dependent on type of material used. Three workpiece materials-AISI 316 SS, Co29Cr6Mo and BeCu, which have different thermal, electrical and mechanical properties are chosen. Microholes of varying depth are drilled at different vibration frequencies and discharge energies to assess the effect on machining time, tool wear and surface roughness. Thereafter process outputs are modelled using a nonparametric probabilistic method called Gaussian Process Regression and are validated on new design points. It is found that effect of vibration is highly material specific and benefit is mostly limited to reduction in machining time. Microscopic images of machined surface reveal extreme globule formation in AISI 316 SS and few micropores in Co29Cr6Mo. Gaussian Process Regression shows great capability to model seemingly stochastic output using limited training data.},
	keywords = {VIBRATION; probabilistic modelling; GPR; Hybrid micro-EDM},
	year = {2022},
	eissn = {2191-4281}
}

@article{MTMT:31818823,
	title = {Analysis of cutting force and vibration at micro-milling of a hardened steel},
	url = {https://m2.mtmt.hu/api/publication/31818823},
	author = {Balázs, Barnabás Zoltán and Geier, Norbert and Pereszlai, Csongor and Poór, Dániel István and Takács, Márton},
	doi = {10.1016/j.procir.2021.03.025},
	journal-iso = {PROCEDIA CIRP},
	journal = {PROCEDIA CIRP},
	volume = {99},
	unique-id = {31818823},
	abstract = {Micro-milling is a commonly used manufacturing method; however, it is a difficult-to-design process mainly due to the size effect. The main aim of this research is the analysis of the cutting forces, the vibrations, and the dominant frequencies of the micro-milling process in a hardened steel. Full factorial machining experiments were conducted using an AlTiN coated micro end mill. The cutting forces and vibrations were analysed and discussed in detail based on material removal mechanisms, tool deflections, and dynamical behaviours. Moreover, a novel cutting force model was developed, which is adequately able to predict and optimise the cutting force.},
	year = {2021},
	eissn = {2212-8271},
	pages = {177-182},
	orcid-numbers = {Balázs, Barnabás Zoltán/0000-0001-5235-1388; Geier, Norbert/0000-0001-7937-7246; Pereszlai, Csongor/0000-0002-2336-6457; Poór, Dániel István/0000-0002-8036-7966; Takács, Márton/0000-0001-6882-1540}
}

@article{MTMT:32021005,
	title = {Experimental investigation of the influence of cutting parameters on surface quality and on the special characteristics of micro-milled surfaces of hardened steels},
	url = {https://m2.mtmt.hu/api/publication/32021005},
	author = {Balázs, Barnabás Zoltán and Takács, Márton},
	doi = {10.1177/09544062211013064},
	journal-iso = {P I MECH ENG C-J MEC},
	journal = {PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE},
	volume = {235},
	unique-id = {32021005},
	issn = {0954-4062},
	year = {2021},
	eissn = {2041-2983},
	pages = {6996-7008},
	orcid-numbers = {Balázs, Barnabás Zoltán/0000-0001-5235-1388; Takács, Márton/0000-0001-6882-1540}
}

@CONFERENCE{MTMT:31296112,
	title = {A minimális forgácsvastagság vizsgálata edzett melegalakító szerszámacél mikromarása esetén},
	url = {https://m2.mtmt.hu/api/publication/31296112},
	author = {Balázs, Barnabás Zoltán and Takács, Márton},
	booktitle = {XXVIII. Nemzetközi Gépészeti Konferencia – OGÉT 2020},
	unique-id = {31296112},
	year = {2020},
	pages = {29-32},
	orcid-numbers = {Balázs, Barnabás Zoltán/0000-0001-5235-1388; Takács, Márton/0000-0001-6882-1540}
}

@article{MTMT:31522173,
	title = {A comparative analysis of characteristics of cutting forces at micro-milling of hardened steels},
	url = {https://m2.mtmt.hu/api/publication/31522173},
	author = {Balázs, Barnabás Zoltán and Takács, Márton},
	doi = {10.1088/1757-899X/903/1/012056},
	journal-iso = {IOP CONF SER MATER SCI ENG},
	journal = {IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING},
	volume = {903},
	unique-id = {31522173},
	issn = {1757-8981},
	abstract = {Micro-milling is one of the most important technologies to produce miniature components. Mainly due to the size reduction, the process has many special characteristics, such as the relatively large tool run-out, the relatively large deformation and the cutting edge radius of the micro-milling tool. The cutting force is often correlated to the phenomena mentioned above, its analysis is therefore often required. The main objective of the present paper is to analyse and compare the characteristics of cutting forces in micro-milling of different hardened steels. A systematic series of experiments were conducted on a hardened AISI H13 hot-work tool steel and a Bohler M303 martensitic corrosion resistance steel. The hardness of both materials is 50 HRC. A 500 mu m diameter two fluted carbide micro end mill and a five-axis micromachining centre were applied. The effects of the cutting parameters are analysed by the analysis of variance (ANOVA). Experimental results show that the workpiece material has a significant influence on the cutting forces.},
	keywords = {MODEL; PARAMETERS; simulation; Electrochemistry; Materials Science, Multidisciplinary; Metallurgy & Metallurgical Engineering; Engineering, Manufacturing; EDGE RADIUS},
	year = {2020},
	eissn = {1757-899X},
	orcid-numbers = {Balázs, Barnabás Zoltán/0000-0001-5235-1388; Takács, Márton/0000-0001-6882-1540}
}

@inproceedings{MTMT:31268406,
	title = {Influence of Electrodes and Parameters on Micro-EDM Drilling Performances of 304L Stainless Steel},
	url = {https://m2.mtmt.hu/api/publication/31268406},
	author = {Ali, Saad Mahmood},
	booktitle = {2019 2nd International Conference on Engineering Technology and its Applications (IICETA)},
	doi = {10.1109/IICETA47481.2019.9012975},
	unique-id = {31268406},
	year = {2019},
	pages = {55-60}
}

@article{MTMT:31080811,
	title = {Comparison of between direct and peck drilling for large aspect ratio in Ti-6Al-4V alloy},
	url = {https://m2.mtmt.hu/api/publication/31080811},
	author = {Eltaggaz, Abdelkrem and Deiab, Ibrahim},
	doi = {10.1007/s00170-019-03314-z},
	journal-iso = {INT J ADV MANUFACT TECHNOL},
	journal = {INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY},
	volume = {102},
	unique-id = {31080811},
	issn = {0268-3768},
	abstract = {Drilling is a crucial cutting operation as it represents 40 to 60% of the total material removed in the aircraft frame industry. Drilling difficult-to-cut materials, such as Ti-6Al-4V, is still a challenge due to their high chemical reactivity with different tool materials and low thermal conductivity. The application of cooling approach is needed to reduce the generated cutting temperature at the machining area. However, in drilling, the coolant does not sufficiently reach to the drill tip at the cutting zone because of the counter flow of the chips limits further penetration, especially in deep-hole drilling. To overcome such problems during direct drilling, different drilling techniques are followed. Peck drilling is among these methods in which the drilling process is conducted in a number of steps to achieve holes with large aspect ratio. The current study presents a detailed comparison between direct drilling and peck drilling of Ti-6Al-4V in terms of tool life, surface roughness, thrust force, torque, and burr formation. In terms of flank wear, thrust force, and burr formation, peck drilling showed better results when compared to direct drilling; however, direct drilling offers slightly better results in terms of surface quality.},
	keywords = {Surface roughness; Torque; Tool life; TI-6AL-4V ALLOY; thrust force; peck drilling; Direct drilling; And burr formation},
	year = {2019},
	eissn = {1433-3015},
	pages = {2797-2805}
}

@{MTMT:26875872,
	title = {Machining of Microshapes and Features},
	url = {https://m2.mtmt.hu/api/publication/26875872},
	author = {Asma, Perveen and Carlo, Molardi},
	booktitle = {Micro and Precision Manufacturing},
	doi = {10.1007/978-3-319-68801-5_1},
	publisher = {Springer Netherlands},
	unique-id = {26875872},
	year = {2018},
	pages = {1-19}
}

@article{MTMT:26813643,
	title = {Investigations into peck drilling process for large aspect ratio micro holes in aluminum 6061-T6},
	url = {https://m2.mtmt.hu/api/publication/26813643},
	author = {Ravisubramanian, S and Shunmugam, M S},
	doi = {10.1080/10426914.2017.1376076},
	journal-iso = {MATER MANUF PROCESS},
	journal = {MATERIALS AND MANUFACTURING PROCESSES},
	volume = {33},
	unique-id = {26813643},
	issn = {1042-6914},
	year = {2018},
	eissn = {1532-2475},
	pages = {935-942}
}

@article{MTMT:3256362,
	title = {The Influence of the Machining Parameters on the Quality of the Holes Made by μEDM in Electrically Conductive Alumina-Oxide},
	url = {https://m2.mtmt.hu/api/publication/3256362},
	author = {Farkas, Balázs Zsolt and Csorba, László Vilmos and Szalay, Tibor and Valery, V Kuzin and Sergei, Yu Fedorov},
	doi = {10.4028/www.scientific.net/SSP.261.101},
	journal-iso = {SOLID STATE PHENOM},
	journal = {SOLID STATE PHENOMENA},
	volume = {261},
	unique-id = {3256362},
	issn = {1012-0394},
	year = {2017},
	eissn = {1662-9779},
	pages = {101-107},
	orcid-numbers = {Farkas, Balázs Zsolt/0000-0002-3784-7972; Szalay, Tibor/0000-0003-3446-2898}
}

@mastersthesis{MTMT:27412412,
	title = {X-ray computed microtomography applications for complex geometries and multiphase flow},
	url = {https://m2.mtmt.hu/api/publication/27412412},
	author = {Lorenzi, M},
	unique-id = {27412412},
	year = {2017}
}

@inproceedings{MTMT:3285187,
	title = {Tool condition monitoring in micro-drilling using vibration signals and artificial neural network. TCM in micro-drilling using vibration signals},
	url = {https://m2.mtmt.hu/api/publication/3285187},
	author = {Patra, Karali and Jha, Amit and Szalay, Tibor},
	booktitle = {2017 International Conference on Industrial Engineering, Applications and Manufacturing (ICIEAM)},
	doi = {10.1109/ICIEAM.2017.8076196},
	unique-id = {3285187},
	year = {2017},
	pages = {1-5},
	orcid-numbers = {Szalay, Tibor/0000-0003-3446-2898}
}

@article{MTMT:26250398,
	title = {Risk Management Impact Assessment on the Success of Strategic Investment Projects. Benchmarking Among Different Sector Companies},
	url = {https://m2.mtmt.hu/api/publication/26250398},
	author = {Filip, Jovanović and Nenad, Milijić and Makedonka, Dimitrova and Ivan, Mihajlović},
	doi = {10.12700/APH.13.5.2016.5.13},
	journal-iso = {ACTA POLYTECH HUNG},
	journal = {ACTA POLYTECHNICA HUNGARICA},
	volume = {13},
	unique-id = {26250398},
	issn = {1785-8860},
	year = {2016},
	eissn = {1785-8860},
	pages = {221-241}
}