TY - JOUR AU - Chen, Xixi AU - Zhao, Yanan AU - Zhang, Yao AU - Li, Baojun AU - Li, Yuchao AU - Jiang, Lingxiang TI - Optical Manipulation of Soft Matter JF - SMALL METHODS J2 - SMALL METHODS VL - 8 PY - 2024 IS - 1 PG - 16 SN - 2366-9608 DO - 10.1002/smtd.202301105 UR - https://m2.mtmt.hu/api/publication/34258910 ID - 34258910 LA - English DB - MTMT ER - TY - JOUR AU - Bronte Ciriza, David AU - Callegari, Agnese AU - Donato, Maria Grazia AU - Cicek, Berk AU - Magazzu, Alessandro AU - Kasianiuk, Iryna AU - Kasyanyuk, Denis AU - Schmidt, Falko AU - Foti, Antonino AU - Gucciardi, Pietro G. AU - Volpe, Giovanni AU - Lanza, Maurizio AU - Biancofiore, Luca AU - Marago, Onofrio M. TI - Optically Driven Janus Microengine with Full Orbital Motion Control JF - ACS PHOTONICS J2 - ACS PHOTONICS VL - 10 PY - 2023 IS - 9 SP - 3223 EP - 3232 PG - 10 SN - 2330-4022 DO - 10.1021/acsphotonics.3c00630 UR - https://m2.mtmt.hu/api/publication/34597548 ID - 34597548 N1 - CNR-IPCF, Istituto per i Processi Chimico-Fisici, Messina, I-98158, Italy Department of Physics, University of Gothenburg, Gothenburg, SE-41296, Sweden Department of Mechanical Engineering, Bilkent University, Ankara, TR-06800, Turkey UNAM - National Nanotechnology Research Center and Institute of Materials Science & Nanotechnology, Bilkent University, Ankara, 06800, Turkey Nanophotonic Systems Laboratory, Department of Mechanical and Process Engineering, ETH Zurich, Zurich, CH-8092, Switzerland Cited By :2 Export Date: 16 April 2024 Correspondence Address: Bronte Ciriza, D.; CNR-IPCF, Italy; email: brontecir@ipcf.cnr.it Correspondence Address: Callegari, A.; Department of Physics, Sweden; email: agnese.callegari@physics.gu.se Correspondence Address: Biancofiore, L.; Department of Mechanical Engineering, Turkey; email: luca@bilkent.edu.tr AB - Microengines have shown promise for a variety of applications in nanotechnology, microfluidics, and nanomedicine, including targeted drug delivery, microscale pumping, and environmental remediation. However, achieving precise control over their dynamics remains a significant challenge. In this study, we introduce a microengine that exploits both optical and thermal effects to achieve a high degree of controllability. We find that in the presence of a strongly focused light beam, a gold-silica Janus particle becomes confined at the stationary point where the optical and thermal forces balance. By using circularly polarized light, we can transfer angular momentum to the particle, breaking the symmetry between the two forces and resulting in a tangential force that drives directed orbital motion. We can simultaneously control the velocity and direction of rotation of the particle changing the ellipticity of the incoming light beam while tuning the radius of the orbit with laser power. Our experimental results are validated using a geometrical optics phenomenological model that considers the optical force, the absorption of optical power, and the resulting heating of the particle. The demonstrated enhanced flexibility in the control of microengines opens up new possibilities for their utilization in a wide range of applications, including microscale transport, sensing, and actuation. LA - English DB - MTMT ER - TY - JOUR AU - Chand, Rahul AU - Rani, Chaudhary Eksha AU - Paul, Diptabrata AU - Kumar, G. V. Pavan TI - Emergence of Directional Rotation in an Optothermally Activated Colloidal System JF - ACS PHOTONICS J2 - ACS PHOTONICS VL - 10 PY - 2023 IS - 11 SP - 4006 EP - 4013 PG - 8 SN - 2330-4022 DO - 10.1021/acsphotonics.3c00890 UR - https://m2.mtmt.hu/api/publication/34490880 ID - 34490880 N1 - Funding Agency and Grant Number: Asian Office of Aerospace Research and Development; I.C.T.S, Bengaluru Funding text: R.C. and C.E.R. thank Ashutosh Shukla and Sumant Panday for the fruitful discussion. G.V.P.K. also acknowledges Prof. Deepak Dhar from IISER Pune, Vijaykumar Krishnamurthy from I.C.T.S, Bengaluru, and Dr. Shradha Mishra from I.I.T.(BHU) for valuable discussion. AB - We experimentally demonstrate the emergence of directional rotation in thermally active-passive colloidal structures under optical confinement. The observed handedness of the rotation of the structure can be controlled by changing the relative positions of the constituent colloids. We show that the angular velocity of rotation is sensitive to the intensity of the incident optical fields and the size of the constituent colloidal entities. The emergence of rotational dynamics can be understood in the context of the asymmetric temperature distribution in the system and the relative location of the active colloid, which creates a local imbalance of optothermal torques in the confined system. Our work demonstrates how localized optothermal fields lead to directional rotational dynamics without explicitly utilizing the spin or orbital angular momentum of light. We envisage that our results will have implications in realizing Brownian engines and can directly relate to rotational dynamics in biological and ecological systems. LA - English DB - MTMT ER - TY - JOUR AU - He, Tao AU - Yang, Yonghui AU - Chen, Xue-Bo TI - Preparation, Stimulus-Response Mechanisms and Applications of Micro/Nanorobots JF - MICROMACHINES J2 - MICROMACHINES-BASEL VL - 14 PY - 2023 IS - 12 PG - 58 SN - 2072-666X DO - 10.3390/mi14122253 UR - https://m2.mtmt.hu/api/publication/34597547 ID - 34597547 AB - Micro- and nanorobots are highly intelligent and efficient. They can perform various complex tasks as per the external stimuli. These robots can adapt to the required functional form, depending on the different stimuli, thus being able to meet the requirements of various application scenarios. So far, microrobots have been widely used in the fields of targeted therapy, drug delivery, tissue engineering, environmental remediation and so on. Although microbots are promising in some fields, few reviews have yet focused on them. It is therefore necessary to outline the current status of these microbots' development to provide some new insights into the further evolution of this field. This paper critically assesses the research progress of microbots with respect to their preparation methods, stimulus-response mechanisms and applications. It highlights the suitability of different preparation methods and stimulus types, while outlining the challenges experienced by microbots. Viable solutions are also proposed for the promotion of their practical use. LA - English DB - MTMT ER - TY - JOUR AU - Lim, Sangmin AU - Du, Yayun AU - Lee, Yongkyu AU - Panda, Shivam Kumar AU - Tong, Dezhong AU - Jawed, M. Khalid TI - Fabrication, control, and modeling of robots inspired by flagella and cilia JF - BIOINSPIRATION & BIOMIMETICS J2 - BIOINSPIR BIOMIM VL - 18 PY - 2023 IS - 1 PG - 26 SN - 1748-3182 DO - 10.1088/1748-3190/aca63d UR - https://m2.mtmt.hu/api/publication/33860279 ID - 33860279 AB - Flagella and cilia are slender structures that serve important functionalities in the microscopic world through their locomotion induced by fluid and structure interaction. With recent developments in microscopy, fabrication, biology, and modeling capability, robots inspired by the locomotion of these organelles in low Reynolds number flow have been manufactured and tested on the micro-and macro-scale, ranging from medical in vivo microbots, microfluidics to macro prototypes. We present a collection of modeling theories, control principles, and fabrication methods for flagellated and ciliary robots. LA - English DB - MTMT ER - TY - JOUR AU - Luo, Xiaojin AU - Yang, Li AU - Cui, Yue TI - Micropumps: Mechanisms, fabrication, and biomedical applications JF - SENSORS AND ACTUATORS A-PHYSICAL J2 - SENSOR ACTUAT A PHYS VL - 363 PY - 2023 PG - 31 SN - 0924-4247 DO - 10.1016/j.sna.2023.114732 UR - https://m2.mtmt.hu/api/publication/34597549 ID - 34597549 AB - As the rapid development of medical devices, micropumps have received increasing and widespread attentions for a variety of healthcare applications. The ongoing challenges for developing the micropumps for healthcare applications are the working mechanisms of the pumps, the device configurations, and the fabrication approaches. To address these challenges, this review would explore the fundamental principles and practical aspects of the micropumps, including the types of the micropumps, their working principles, the manufacturing processes for constructing the micropumps, and the related biomedical applications and commercial products. This review can serve as a resouce for the construction of next-generation micropumps, as well as a wide range of biomedical applications ranging from the disease diagnosis to drug delivery. LA - English DB - MTMT ER - TY - JOUR AU - Al-Khateeb, Ayman AU - Lyras, A. AU - Lembessis, V. E. AU - Aldossary, O. M. TI - Two-photon bound-bound atomic transitions induced by LG beams JF - RESULTS IN PHYSICS J2 - RESULTS PHYS VL - 43 PY - 2022 PG - 6 SN - 2211-3797 DO - 10.1016/j.rinp.2022.106107 UR - https://m2.mtmt.hu/api/publication/33873277 ID - 33873277 AB - We report theoretical results for the transition amplitudes of two-photon transitions induced in a one-activeelectron atomic system by a LG(10) beam. We identify the excitation pathways for selected two-photon transitions starting from the ground state of the atomic system. We numerically evaluate these two-photon transition matrix elements for selected transitions in Ca+ employing the truncated summation method. We provide a comparison with corresponding transitions induced by a Gaussian beam and present an estimation of the relative strength when the two different types of light beams are employed. LA - English DB - MTMT ER - TY - JOUR AU - Bai, Wen AU - Shao, Meng AU - Zhou, Jinhua AU - Zhao, Qian AU - Ji, Feng AU - Zhong, Min-Cheng TI - An opto-thermal approach for rotating a trapped core-shell magnetic microparticle with patchy shell JF - REVIEW OF SCIENTIFIC INSTRUMENTS J2 - REV SCI INSTRUM VL - 93 PY - 2022 IS - 8 PG - 6 SN - 0034-6748 DO - 10.1063/5.0092384 UR - https://m2.mtmt.hu/api/publication/33181374 ID - 33181374 AB - The ability to trap and rotate magnetic particles has important applications in biophysical research and optical micromachines. However, it is difficult to achieve the spin rotation of magnetic particles with optical tweezers due to the limit in transferring spin angular momentum of light. Here, we propose a method to obtain controlled spin rotation of a magnetic microparticle by the phoretic torque, which is originated from inhomogeneous heating of the microparticle's surface. The microparticle is trapped and rotated nearby the laser focus center. The rotation frequency is several Hertz and can be controlled by adjusting the laser power. Our work provides a method to the study of optical rotation of microscopic magnetic particles, which will push toward both translational and rotational manipulation of the microparticles simultaneously in a single optical trap. Published under an exclusive license by AIP Publishing. LA - English DB - MTMT ER - TY - JOUR AU - Cheng, W. AU - Qiao, H. AU - Wang, M. AU - Ma, S. AU - Shu, F. AU - Xie, C. AU - Liang, G. TI - Propagation characteristics of elliptic vortex beams in nonlocal nonlinear media JF - OPTICS COMMUNICATIONS J2 - OPT COMMUN VL - 508 PY - 2022 SN - 0030-4018 DO - 10.1016/j.optcom.2021.127799 UR - https://m2.mtmt.hu/api/publication/32600267 ID - 32600267 N1 - Engineering Research Center for Photoelectric Intelligent Sensing, Department of Physics, Shangqiu Normal University, Shangqiu, 476000, China Department of Ophthalmology, First People's Hospital of Shangqiu, Henan, 476000, China The Key Laboratory of Weak Light Nonlinear Photonics (Nankai University, Tianjin 300457), Ministry of Education, China Export Date: 18 January 2022 CODEN: OPCOB Correspondence Address: Liang, G.; Engineering Research Center for Photoelectric Intelligent Sensing, China; email: liangguo0916@163.com AB - Optical patterns with the orbital angular momentum (OAM) can serve as “optical spanners”, and have attracted much attention for their applications in biophysics, micromechanics or microfluidics. In this work, we theoretically demonstrate the propagation characteristics of elliptic vortex beams carrying the OAM in nonlocal nonlinear media. The elliptic vortex beams cannot evolve as solitons due to their non-circular-symmetry, but can evolve as breathers in the nonlinear media without anisotropy. During breathing evolutions, the rotating phenomenon is observed. The rotations take place in both the vortex cores and the beam envelopes, which exhibit opposite rotating directions. The breathing and rotating evolutions both have close relations with the input power and the beam size. The analytical results are well confirmed by the numerical simulations. The results obtained in the paper might find potential applications in beam shaping, and in optical manipulations of rod-shaped micro-particles. © 2021 Elsevier B.V. LA - English DB - MTMT ER - TY - JOUR AU - Hernández, R.J.H. AU - Fischer, T.M. AU - Tierno, P. TI - Dynamics and interactions of magnetically driven colloidal microrotors JF - APPLIED PHYSICS LETTERS J2 - APPL PHYS LETT VL - 120 PY - 2022 IS - 8 SN - 0003-6951 DO - 10.1063/5.0076574 UR - https://m2.mtmt.hu/api/publication/32912650 ID - 32912650 LA - English DB - MTMT ER - TY - JOUR AU - Lee, Jinho AU - Cho, Donghwi AU - Chen, Haomin AU - Shim, Young-Seok AU - Park, Junyong AU - Jeon, Seokwoo TI - Proximity-field nanopatterning for high-performance chemical and mechanical sensor applications based on 3D nanostructures JF - APPLIED PHYSICS REVIEWS J2 - APPL PHYS REV VL - 9 PY - 2022 IS - 1 PG - 23 SN - 1931-9401 DO - 10.1063/5.0081197 UR - https://m2.mtmt.hu/api/publication/32971181 ID - 32971181 AB - In this era of the Internet of Things, the development of innovative sensors has rapidly accelerated with that of nanotechnology to accommodate various demands for smart applications. The practical use of three-dimensional (3D) nanostructured materials breaks several limitations of conventional sensors, including the large surface-to-volume ratio, precisely tunable pore size and porosity, and efficient signal transduction of 3D geometries. This review provides an in-depth discussion on recent advances in chemical and mechanical sensors based on 3D nanostructures, which are rationally designed and manufactured by advanced 3D nanofabrication techniques that consider structural factors (e.g., porosity, periodicity, and connectivity). In particular, we focus on a proximity-field nanopatterning technique that specializes in the production of periodic porous 3D nanostructures that satisfy the structural properties universally required to improve the performance of various sensor systems. State-of-the-art demonstrations of high-performance sensor devices such as supersensitive gas sensors and wearable strain sensors realized through designed 3D nanostructures are summarized. Finally, challenges and outlooks related to nanostructures and nanofabrication for the practical application of 3D nanostructure-based sensor systems are proposed. LA - English DB - MTMT ER - TY - JOUR AU - Li, Manman AU - Chen, Xu AU - Yan, Shaohui AU - Zhang, Yanan AU - Yao, Baoli TI - Enatioselective Rotation of Chiral Particles by Azimuthally Polarized Beams JF - Advanced Photonics Research J2 - Adv Photo Res VL - 3 PY - 2022 IS - 10 PG - 6 SN - 2699-9293 DO - 10.1002/adpr.202200117 UR - https://m2.mtmt.hu/api/publication/33873275 ID - 33873275 AB - The chirality-dependent forces can offer new possibilities for passive optical separation and identification of chiral particles, which opens great opportunities to develop the technologies of pharmaceutics, chemicals, and biomedicine. Here, a robust enantioselective rotation of subwavelength chiral particles using lateral optical forces induced by a tightly focused azimuthally polarized beam is demonstrated. Although this focused field carries neither optical orbital angular momentum nor optical chirality, the lateral optical force can rotate the particle with opposite chirality around opposite directions, achieving an effective optical enantioseparation. Such a counterintuitive phenomenon is closely related to the transformation of the magnetic spin angular momentum of the focused field into the mechanical orbital angular momentum of the particle. In addition, the particle with different chirality parameters will be trapped in different orbits while with opposite chirality trapped in the same orbit, meanwhile its rotation direction is determined by the sign of the chirality parameter, which can realize an efficient chiral identification of single particles. The investigations may open up a new path toward light-induced rotation or probing of objects with different chirality parameters. LA - English DB - MTMT ER - TY - JOUR AU - Li, Manman AU - Yan, Shaohui AU - Zhang, Yanan AU - Zhou, Yuan AU - Yao, Baoli TI - Orbital angular momentum in optical manipulations JF - JOURNAL OF OPTICS J2 - J OPTICS-UK VL - 24 PY - 2022 IS - 11 PG - 21 SN - 2040-8978 DO - 10.1088/2040-8986/ac9192 UR - https://m2.mtmt.hu/api/publication/33181372 ID - 33181372 N1 - Export Date: 16 January 2023 AB - Since Allen et al recognized that light beams possessing a helical phase structure can carry orbital angular momentum (OAM), OAM of light has witnessed groundbreaking developments and has founded tremendous applications in a broad range of fields. In this article, beginning with a general introduction to OAM, basic theories, and computational approaches, we provide an overview on recent advances in optical manipulation with OAM. Owing to the distinct characteristics of OAM beams feature, i.e. helical wave front, doughnut intensity profile and certain OAM per photon. Optical manipulation using OAM has demonstrated innovative landscapes, realized the manipulation of particles with different functions ranging from optical spanner, manipulating of low-refractive-index particles, optical sorting and guiding, up to optical spin-orbit interaction and chiral discrimination. This review will be helpful for understanding the mechanisms behind light-matter interaction. LA - English DB - MTMT ER - TY - JOUR AU - Li, Xiaofei AU - Zhang, Hao AU - Gao, Yuanmei AU - Gbur, Greg AU - Cai, Yangjian AU - Yuan, Yangsheng TI - Massive Parallel Sorting of Particles Using Unwound Polygonal Vortex Beams JF - FRONTIERS IN PHYSICS J2 - FRONT PHYS-LAUSANNE VL - 10 PY - 2022 PG - 7 SN - 2296-424X DO - 10.3389/fphy.2022.877804 UR - https://m2.mtmt.hu/api/publication/32971180 ID - 32971180 AB - Optical sorting, as one kind of optical tweezers, is used to separate mixed particles in a background environment. This unusual tool has a wide application prospect because the non-contact and non-destructive advantages ideally suit the pressing need of bio-technology. However, most sorting methods and devices have been accomplished based on real-time one-by-one sorting, which ignored the sorting efficiency and is not applicable to high-capacity particles. Although more and more structured light beams are proposed to enhance the sorting efficiency, it is still not enough for desired applications. Here, we propose a method for the massive parallel sorting of particles: polygonal optical vortex (OV) beams are unwound by a geometric transformation to produce linear OV beams with kinked distributions. This structured light is used to greatly enhance the sorting efficiency. We adopt the fractal theory to illustrate the increase of the region over which the beam can interact with particles. We demonstrate that the gradient force of this beam is large enough to manipulate spherical particles in the Rayleigh regime of scattering. These results introduce new possibilities for high-capacity particle sorting. LA - English DB - MTMT ER - TY - CHAP AU - Madsen, Andreas Gejl AU - Eriksen, Rene AU - Gluckstad, Jesper ED - Andrews, DL ED - Galvez, EJ ED - Rubinsztein-Dunlop, H TI - Complex light based on machine learning T2 - COMPLEX LIGHT AND OPTICAL FORCES XVI PB - International Society for Optical Engineering (SPIE) CY - Bellingham (WA) SN - 9781510649057 T3 - Proceedings of SPIE, ISSN 0277-786X PY - 2022 PG - 12 DO - 10.1117/12.2610752 UR - https://m2.mtmt.hu/api/publication/33181375 ID - 33181375 AB - Machine Learning (ML) has recently been applied to the problem of digital hologram generation with generally positive results due to the generation speed increase that is possible, because of the non-iterative inference step. In this work, a Convolutional Neural Network (CNN) is trained to generate holograms, and its performance is compared to state-of-the-art iterative methods, both in terms of reconstruction quality and computation time. Here, a CNN built on the UNet architecture, capable of hologram generation, is presented. The network is trained on 4096 images of varying spatial frequencies, both generated by hand and from the DIV2K dataset. It is compared to the most common iterative method for hologram generation, namely the Gerchberg-Saxton (GS) algorithm and its modern and improved implementations. In reconstruction quality, the neural network outperforms the original implementation of GS when evaluating Mean Square Error (MSE), geometric error (GE), Structural Similarity Index Measurement (SSIM), and Peak Signal-Noise Ratio (PSNR) of 64 unseen test images. However, on the same test images, the network lacks behind the modern, optimized GS implementations in all error and accuracy measurements. The network does, however, achieve these results at a rate 70-280 times faster than the iterative methods, depending on the particular implementation of the GS algorithm, which corresponds to a possible generation rate of the network of 32 FPS on average. LA - English DB - MTMT ER - TY - JOUR AU - Mckee, Seyyedhossien AU - Lutey, Adrian AU - Sciancalepore, Corrado AU - Poli, Federica AU - Selleri, Stefano AU - Cucinotta, Annamaria TI - Microfabrication of polymer microneedle arrays using two-photon polymerization JF - JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY B-BIOLOGY J2 - J PHOTOCH PHOTOBIO B VL - 229 PY - 2022 PG - 11 SN - 1011-1344 DO - 10.1016/j.jphotobiol.2022.112424 UR - https://m2.mtmt.hu/api/publication/32971179 ID - 32971179 AB - Three dimensional (3D) printing technology has pushed state-of-the-art manufacturing towards more advanced processing methods through its ability to produce complex computer-designed 3D structures in a wide range of materials. Two-photon polymerization applied to the fabrication of ultraprecise 3D microstructures is one of the various innovative approaches to cutting-edge 3D printing. The integration of an ultrashort pulsed laser source and an appropriate photoresist has made it an attractive candidate for advanced photonics and biomedical applications. This paper presents the development of 3D solid microneedle arrays as a novel transdermal drug delivery system via two-photon polymerization in a single manufacturing step. Through a series of experiments, the best fabrication parameters are identified. Finite element simulations are then performed to investigate the interaction between a single microneedle and human skin. The results of this study highlight the influence of fabrication parameters such as laser power, scanning speed, hatch distance and layer height on the structural resolution and fabrication time of microneedles, as well as human skin deformation caused through application of force to a single polymer microneedle. LA - English DB - MTMT ER - TY - JOUR AU - Shi, Yuzhi AU - Zhu, Tongtong AU - Liu, Ai Qun AU - Zhou, Lei-Ming AU - Nieto-Vesperinas, Manuel AU - Hassanfiroozi, Amir AU - Liu, Jingquan AU - Tsai, Din Ping AU - Li, Zhenyu AU - Ding, Weiqiang AU - Wang, Fan AU - Li, Hang AU - Song, Qinghua AU - Xu, Xiaohao AU - Li, Baojun AU - Cheng, Xinbin AU - Wu, Pin Chieh AU - Chan, Che Ting AU - Qiu, Cheng-Wei TI - Inverse Optical Torques on Dielectric Nanoparticles in Elliptically Polarized Light Waves JF - PHYSICAL REVIEW LETTERS J2 - PHYS REV LETT VL - 129 PY - 2022 IS - 5 PG - 7 SN - 0031-9007 DO - 10.1103/PhysRevLett.129.053902 UR - https://m2.mtmt.hu/api/publication/33181373 ID - 33181373 N1 - Cited By :3 Export Date: 16 January 2023 CODEN: PRLTA AB - Elliptically polarized light waves carry the spin angular momentum (SAM), so they can exert optical torques on nanoparticles. Usually, the rotation follows the same direction as the SAM due to momentum conservation. It is counterintuitive to observe the reversal of optical torque acting on an ordinary dielectric nanoparticle illuminated by an elliptically or circularly polarized light wave. Here, we demonstrate that negative optical torques, which are opposite to the direction of SAM, can ubiquitously emerge when elliptically polarized light waves are impinged on dielectric nanoparticles obliquely. Intriguingly, the rotation can be switched between clockwise and counterclockwise directions by controlling the incident angle of light. Our study suggests a new playground to harness polarization-dependent optical force and torque for advancing optical manipulations. LA - English DB - MTMT ER - TY - JOUR AU - Zhu, Qi AU - Li, Nan AU - Su, Heming AU - Li, Wenqiang AU - Hu, Huizhu TI - A review of optically induced rotation JF - FRONTIERS OF INFORMATION TECHNOLOGY & ELECTRONIC ENGINEERING J2 - FRONT INFORM TECH EL VL - 23 PY - 2022 IS - 2 SP - 171 EP - 185 PG - 15 SN - 2095-9184 DO - 10.1631/FITEE.2000338 UR - https://m2.mtmt.hu/api/publication/32971182 ID - 32971182 N1 - Cited By :2 Export Date: 16 January 2023 AB - The optical rotation technique arose in the 1990s. Optical tweezer brought an ideal platform for research on the angular momentum of laser beams. For decades, the optical rotation technique has been widely applied in laboratory optical manipulation and the fields of biology and optofluidics. Recently, it has attracted much attention for its potential in the classical and quantum regimes. In this work, we review the progress of experiments and applications of optically induced rotation. First, we introduce the basic exploration of angular momentum. Then, we cover the development and application of optical rotation induced by orbital angular momentum, and the spin angular momentum is presented. Finally, we elaborate on recent applications of the optical rotation technique in high vacuum. As precise optical manipulation in a liquid medium enters its maturity, optical tweezers in high vacuum open a new path for the high-speed micro-rotor. LA - English DB - MTMT ER - TY - JOUR AU - Bruce, G.D. AU - Rodríguez-Sevilla, P. AU - Dholakia, K. TI - Initiating revolutions for optical manipulation: the origins and applications of rotational dynamics of trapped particles JF - ADVANCES IN PHYSICS: X J2 - ADV PHYS-X VL - 6 PY - 2021 IS - 1 SN - 2374-6149 DO - 10.1080/23746149.2020.1838322 UR - https://m2.mtmt.hu/api/publication/31989279 ID - 31989279 N1 - SUPA School of Physics and Astronomy, University of St Andrews, St Andrews, United Kingdom Department of Physics, College of Science, Yonsei University, Seoul, South Korea Export Date: 27 April 2021 Correspondence Address: Dholakia, K.; SUPA School of Physics and Astronomy, United Kingdom; email: gdb2@st-andrews.ac.uk Correspondence Address: Dholakia, K.; SUPA School of Physics and Astronomy, United Kingdom; email: kd1@st-andrews.ac.uk AB - The fastest-spinning man-made object is a tiny dumbbell rotating at 5 GHz. The smallest wind-up motor is constructed from a DNA molecule. Picoliter volumes of fluids are remotely controlled and their viscosity precisely measured using microrheometers based on miniscule rotating particles. Theoretical predictions for extraordinarily weak forces related to the presence of dark matter, dark energy and vacuum-induced friction might be revealed, and the surprising properties of light have already been experimentally evidenced. All of these exciting landmarks have only been possible thanks to the torque exerted by light, which enables rotation of an optically trapped particle. Here, we review how light can impart torque on optically trapped particles, paying close attention to the design of the properties of both the particle and the light field. We detail how the maximum achievable rotation speed is limited by the environment, but can simultaneously be used to infer properties of the surrounding medium and of the light field itself. We also review the state-of-the-art applications of light-driven rotors, as well as proposals for the next generation of measurements, particularly at the classical-quantum interface, which can be performed using rotating optically trapped objects. © 2020 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group. LA - English DB - MTMT ER - TY - JOUR AU - Bunea, Ada-Ioana AU - Martella, Daniele AU - Nocentini, Sara AU - Parmeggiani, Camilla AU - Taboryski, Rafael AU - Wiersma, Diederik S. TI - Light-Powered Microrobots: Challenges and Opportunities for Hard and Soft Responsive Microswimmers JF - ADVANCED INTELLIGENT SYSTEMS J2 - Advanced Intelligent Systems VL - 3 PY - 2021 IS - 4 PG - 21 SN - 2640-4567 DO - 10.1002/aisy.202000256 UR - https://m2.mtmt.hu/api/publication/32297117 ID - 32297117 N1 - Funding Agency and Grant Number: VILLUM FONDEN [34424, 00022918]; Ente Cassa di Risparmio di FirenzeFondazione Cassa Risparmio Firenze [2017/0713] Funding text: A.-I.B. acknowledges financial support from VILLUM FONDEN (grant numbers 34424 and 00022918). Financial support from Ente Cassa di Risparmio di Firenze (2017/0713) is also acknowledged. AB - Worldwide research in microrobotics has exploded in the past two decades, leading to the development of microrobots propelled in various manners. Despite significant advances in the field and successful demonstration of a wide range of applications, microrobots have yet to become the preferred choice outside a laboratory environment. After introducing available microrobotic propulsion and control mechanisms, microrobots that are manufactured and powered by light are focused herein. Referring to pioneering works and recent interesting examples, light is presented not only as a fabrication tool, by means of two-photon polymerization direct laser writing, but also as an actuator for microrobots in both hard and soft stimuli-responsive polymers. In this scenario, a number of challenges that yet prevent polymeric light-powered microrobots from reaching their full potential are identified, whereas potential solutions to overcome said challenges are suggested. As an outlook, a number of real-world applications that light-powered microrobots should be particularly suited for are mentioned, together with the advances needed for them to achieve such purposes. An interdisciplinary approach combining materials science, microfabrication, photonics, and data science should be conducive to the next generation of microrobots and will ultimately foster the translation of microrobotic applications into the real world. LA - English DB - MTMT ER - TY - JOUR AU - Chen, Qianying AU - Lv, Pengyu AU - Huang, Jianyong AU - Huang, Tian-Yun AU - Duan, Huiling TI - Intelligent Shape-Morphing Micromachines JF - RESEARCH J2 - RESEARCH-CHINA VL - 2021 PY - 2021 PG - 16 SN - 2096-5168 DO - 10.34133/2021/9806463 UR - https://m2.mtmt.hu/api/publication/32361427 ID - 32361427 AB - Intelligent machines are capable of switching shape configurations to adapt to changes in dynamic environments and thus have offered the potentials in many applications such as precision medicine, lab on a chip, and bioengineering. Even though the developments of smart materials and advanced micro/nanomanufacturing are flouring, how to achieve intelligent shape-morphing machines at micro/nanoscales is still significantly challenging due to the lack of design methods and strategies especially for small-scale shape transformations. This review is aimed at summarizing the principles and methods for the construction of intelligent shape-morphing micromachines by introducing the dimensions, modes, realization methods, and applications of shape-morphing micromachines. Meanwhile, this review highlights the advantages and challenges in shape transformations by comparing micromachines with the macroscale counterparts and presents the future outlines for the next generation of intelligent shape-morphing micromachines. LA - English DB - MTMT ER - TY - JOUR AU - Djoko, M. AU - Tabi, Conrad Bertrand AU - Kofane, T. C. TI - Effects of the septic nonlinearity and the initial value of the radius of orbital angular momentum beams on data transmission in optical fibers using the cubic-quintic-septic complex Ginzburg-Landau equation in presence of higher-order dispersions JF - CHAOS SOLITONS & FRACTALS J2 - CHAOS SOLITON FRACT VL - 147 PY - 2021 PG - 7 SN - 0960-0779 DO - 10.1016/j.chaos.2021.110957 UR - https://m2.mtmt.hu/api/publication/32361424 ID - 32361424 AB - In a three-dimensional (3D) dissipative medium described by the higher-order (3+1)-dimensional cubic-quintic-septic complex Ginzburg-Landau [(3+1)D CQS-CGL] equation with the viscous (spectral-filtering) term, self steepening, Raman effect, dispersion terms up to six, diffraction and cubic-quintic-septic non-linearities, we demonstrate that necklace ring beams with initial spherical shape carrying integer and even fractional angular momentum and whose intensities are azimuthally periodically modulated, can evolve into caterpillar, hexagonal, rectangular, scorpion, diamond and pillow dissipative optical bullets. The outcome of the evolution is controlled by the radius and the value of the septic nonlinearity in the initial necklace ring. We reveal numerically that spatiotemporal necklace-ring solitons carrying integer, and even fractional angular momentum can be self-trapped over a huge propagation distance even in the presence of random perturbations.(c) 2021 Elsevier Ltd. All rights reserved. LA - English DB - MTMT ER - TY - JOUR AU - Fujiwara, Hideki AU - Sudo, Kota AU - Sunaba, Yuji AU - Pin, Christophe AU - Ishida, Shutaro AU - Sasaki, Keiji TI - Spin-Orbit Angular-Momentum Transfer from a Nanogap Surface Plasmon to a Trapped Nanodiamond JF - NANO LETTERS J2 - NANO LETT VL - 21 PY - 2021 IS - 14 SP - 6268 EP - 6273 PG - 6 SN - 1530-6984 DO - 10.1021/acs.nanolett.1c02083 UR - https://m2.mtmt.hu/api/publication/32361420 ID - 32361420 AB - The ability to control the motion of single nanoparticles or molecules is currently one of the major scientific and technological challenges. Despite tremendous progress in the field of plasmonic nanotweezers, controlled nanoscale manipulation of nanoparticles trapped by a plasmonic nanogap antenna has not been reported yet. Here, we demonstrate the controlled orbital rotation of a single fluorescent nanodiamond trapped by a gold trimer nanoantenna irradiated by a rotating linearly polarized light or circularly polarized light. Remarkably, the rotation direction is opposite to the light's polarization rotation. We numerically show that this inversion comes from sequential excitation of individual nanotriangles in the reverse order when the linear polarization is rotated, whereas using a circular polarization, light-nanoparticle angular momentum transfer occurs via the generation of a Poynting vector vortex of reversed handedness. This work provides a new path for the control of light-matter angular momentum transfer using plasmonic nanogap antennas. LA - English DB - MTMT ER - TY - JOUR AU - Gieseler, Jan AU - Gomez-Solano, Juan Ruben AU - Magazzu, Alessandro AU - Castillo, Isaac Perez AU - Garcia, Laura Perez AU - Gironella-Torrent, Marta AU - Viader-Godoy, Xavier AU - Ritort, Felix AU - Pesce, Giuseppe AU - Arzola, Alejandro V AU - Volke-Sepulveda, Karen AU - Volpe, Giovanni TI - Optical tweezers - from calibration to applications: a tutorial JF - ADVANCES IN OPTICS AND PHOTONICS J2 - ADV OPT PHOTONICS VL - 13 PY - 2021 IS - 1 SP - 74 EP - 241 PG - 168 SN - 1943-8206 DO - 10.1364/AOP.394888 UR - https://m2.mtmt.hu/api/publication/32361428 ID - 32361428 N1 - Export Date: 3 August 2022 AB - Since their invention in 1986 by Arthur Ashkin and colleagues, optical tweezers have become an essential tool in several fields of physics, spectroscopy, biology, nanotechnology, and thermodynamics. In this tutorial, we provide a primer on how to calibrate optical tweezers and how to use them for advanced applications. After a brief general introduction on optical tweezers, we focus on describing and comparing the various available calibration techniques. Then, we discuss some cutting-edge applications of optical tweezers in a liquid medium, namely, to study single-molecule and single-cell mechanics, microrheology, colloidal interactions, statistical physics, and transport phenomena. Finally, we consider optical tweezers in vacuum, where the absence of a viscous medium offers vastly different dynamics and presents new challenges. We conclude with some perspectives for the field and the future applications of optical tweezers. This tutorial provides both a step-by-step guide ideal for non-specialists entering the field and a comprehensive manual of advanced techniques useful for expert practitioners. All of the examples are complemented by the sample data and software necessary to reproduce them. (C) 2021 Optical Society of America. LA - English DB - MTMT ER - TY - CHAP AU - Madsen, A.E.G. AU - Eriksen, R.L. AU - Glückstad, J. ED - Galvez, E.J. ED - Rubinsztein-Dunlop, H. ED - Andrews, D.L. TI - Algorithmic considerations for complex light VL - 11701 PB - SPIE SN - 9781510642379 T3 - Proceedings of SPIE, ISSN 0277-786X ; 11701. PY - 2021 DO - 10.1117/12.2583505 UR - https://m2.mtmt.hu/api/publication/32600268 ID - 32600268 N1 - Export Date: 18 January 2022 CODEN: PSISD Correspondence Address: Glückstad, J.; SDU Centre for Photonics Engineering, Denmark; email: jegl@mci.sdu.dk AB - Computer Generated Holography (CGH) promises unprecedented capabilities for a variety of applications in Optics and Photonics. However, one of the biggest challenges for CGHs is the fundamental tradeoff between algorithm runtime and achieved reconstruction fidelity and efficiency while maintaining light projections at real-time frame rates. In addition, the light projection quality achieved by most CGH-modalities are rather low due to the mismatch between the optical wave propagation of the applied Spatial Light Modulator (SLM) and its simulated model. A promising new avenue of CGH, neural holography, utilizes machine learning models in the generation of single and multi plane holograms. Neural network generated holograms have the distinct advantage that inference is performed in constant time without the need for iterative calculations of the phase SLM pattern. This allows the networks to generate holograms 3-500 times faster than traditional iterative algorithms, which enables the applications dependent on real-time holography. State-of-the-art implementations of neural holography [1, 2] furthermore achieve higher accuracy than traditional iterative algorithm, when compared to target images. Applications of these SLM-encoded CGHs include all areas where a fast and parallel one-or two-photon light excitation is needed such as in Laser Material Processing, Additive Manufacturing and 3D printing, Neurophotonics and Optogenetics, Laser Image Projection and many more. © 2021 SPIE. LA - English DB - MTMT ER - TY - JOUR AU - Otuka, Adriano J. G. AU - Tomazio, Nathalia B. AU - Paula, Kelly T. AU - Mendonca, Cleber R. TI - Two-Photon Polymerization: Functionalized Microstructures, Micro-Resonators, and Bio-Scaffolds JF - POLYMERS J2 - POLYMERS-BASEL VL - 13 PY - 2021 IS - 12 PG - 30 SN - 2073-4360 DO - 10.3390/polym13121994 UR - https://m2.mtmt.hu/api/publication/32361425 ID - 32361425 AB - The direct laser writing technique based on two-photon polymerization (TPP) has evolved considerably over the past two decades. Its remarkable characteristics, such as 3D capability, sub-diffraction resolution, material flexibility, and gentle processing conditions, have made it suitable for several applications in photonics and biosciences. In this review, we present an overview of the progress of TPP towards the fabrication of functionalized microstructures, whispering gallery mode (WGM) microresonators, and microenvironments for culturing microorganisms. We also describe the key physical-chemical fundamentals underlying the technique, the typical experimental setups, and the different materials employed for TPP. LA - English DB - MTMT ER - TY - JOUR AU - Peng, Jiang AU - Xing, Jingliang AU - Bai, Jiakun AU - Ren, Ying AU - Wang, Tao AU - Jia, Junhui TI - Spatial photocontrol of the passive optical output direction of the elastic molecular crystals based on acylhydrazone derivatives JF - DYES AND PIGMENTS J2 - DYES PIGMENTS VL - 194 PY - 2021 PG - 9 SN - 0143-7208 DO - 10.1016/j.dyepig.2021.109529 UR - https://m2.mtmt.hu/api/publication/32361419 ID - 32361419 N1 - Cited By :2 Export Date: 18 January 2022 CODEN: DYPID Correspondence Address: Jia, J.; Key Laboratory of Magnetic Molecules and Magnetic Information Material, China; email: jiajunhui@sxnu.edu.cn AB - The photo-reactive acylhydrazone derivatives (4-FBAc, 4-ClBAc, 4-BrBAc and 4-IBAc) had been prepared, and they could undergo reversible E-Z isomerization reactions in the crystals under UV (365 nm) irradiation and heating condition. Meanwhile, the significant photomechanical behaviors were observed for the crystals with different shapes. The crystals of 4-FBAc (block-like), 4-ClBAc (block-like) and 4-BrBAc (rod-like) showed lightinduced cracking, salient and cracking behaviors, respectively. Interestingly, the crystals of 4-FBAc (needle-like) and 4-IBAc (needle-like) bent away from the UV light (E-*Z isomerization) firstly, then bent toward the source with the increasing of the irradiation or heating time (structure relaxation and Z-*E isomerization). The theoretical study also showed that the molecules could undergo reversible E-Z isomerization reactions under UV irradiation and heating condition. Interestingly, the passive optical (635 nm) output direction of the crystal of 4FBAc could be controlled by UV light. When mechanical force was applied or removed, the needle-like crystals of 4-FBAc and 4-IBAc exhibited reversible elastic bending properties. Analysis of the single crystal data suggested that C-HMIDLINE HORIZONTAL ELLIPSIS pi and H-bonds were responsible for the flexibility. So, the elastic organic molecular crystals based on acylhydrazone derivatives could be used as the candidate for crystal actuators and position-controllable optical transducer. LA - English DB - MTMT ER - TY - JOUR AU - Shinde, Ashwini AU - Illath, Kavitha AU - Gupta, Pallavi AU - Shinde, Pallavi AU - Lim, Ki-Taek AU - Nagai, Moeto AU - Santra, Tuhin Subhra TI - A Review of Single-Cell Adhesion Force Kinetics and Applications JF - CELLS J2 - CELLS-BASEL VL - 10 PY - 2021 IS - 3 SN - 2073-4409 DO - 10.3390/cells10030577 UR - https://m2.mtmt.hu/api/publication/31912224 ID - 31912224 N1 - Department of Engineering Design, Indian Institute of Technology Madras, Chennai Tamil Nadu, 600036, India Department of Biosystems Engineering, Kangwon National University, Chuncheon‐Si, Gangwon‐Do, 24341, South Korea Department of Mechanical Engineering, Toyohashi University of Technology, 1‐1 Hibarigaoka, Tempaku‐cho, Aichi, Toyohashi, 441‐8580, Japan Cited By :32 Export Date: 27 February 2024 Correspondence Address: Santra, T.S.; Department of Engineering Design, India; email: tuhin@iitm.ac.in LA - English DB - MTMT ER - TY - JOUR AU - Stilgoe, Alexander B. AU - Armstrong, Declan J. AU - Rubinsztein-Dunlop, Halina TI - Enhanced Signal-to-Noise and Fast Calibration of Optical Tweezers Using Single Trapping Events JF - MICROMACHINES J2 - MICROMACHINES-BASEL VL - 12 PY - 2021 IS - 5 PG - 12 SN - 2072-666X DO - 10.3390/mi12050570 UR - https://m2.mtmt.hu/api/publication/32361426 ID - 32361426 AB - The trap stiffness us the key property in using optical tweezers as a force transducer. Force reconstruction via maximum-likelihood-estimator analysis (FORMA) determines the optical trap stiffness based on estimation of the particle velocity from statistical trajectories. Using a modification of this technique, we determine the trap stiffness for a two micron particle within 2 ms to a precision of similar to 10% using camera measurements at 10 kfps with the contribution of pixel noise to the signal being larger the level Brownian motion. This is done by observing a particle fall into an optical trap once at a high stiffness. This type of calibration is attractive, as it avoids the use of a nanopositioning stage, which makes it ideal for systems of large numbers of particles, e.g., micro-fluidics or active matter systems. LA - English DB - MTMT ER - TY - JOUR AU - Su, Jingjing AU - Li, Nan AU - Mou, Jiapeng AU - Liu, Yishi AU - Chen, Xingfan AU - Hu, Huizhu TI - Simultaneous Trapping of Two Types of Particles with Focused Elegant Third-Order Hermite-Gaussian Beams JF - MICROMACHINES J2 - MICROMACHINES-BASEL VL - 12 PY - 2021 IS - 7 PG - 9 SN - 2072-666X DO - 10.3390/mi12070769 UR - https://m2.mtmt.hu/api/publication/32361422 ID - 32361422 AB - The focusing properties of elegant third-order Hermite-Gaussian beams (TH(3)GBs) and the radiation forces exerted on dielectric spherical particles produced by such beams in the Rayleigh scattering regime have been theoretically studied. Numerical results indicate that the elegant TH(3)GBs can be used to simultaneously trap and manipulate nanosized dielectric spheres with refractive indexes lower than the surrounding medium at the focus and those with refractive indexes larger than the surrounding medium in the focal vicinity. Furthermore, by changing the radius of the beam waist, the transverse trapping range and stiffness at the focal plane can be changed. LA - English DB - MTMT ER - TY - JOUR AU - Zhang, Shuailong AU - Elsayed, Mohamed AU - Peng, Ran AU - Chen, Yujie AU - Zhang, Yanfeng AU - Peng, Jiaxi AU - Li, Weizhen AU - Chamberlain, M. Dean AU - Nikitina, Adele AU - Yu, Siyuan AU - Liu, Xinyu AU - Neale, Steven L. AU - Wheeler, Aaron R. TI - Reconfigurable multi-component micromachines driven by optoelectronic tweezers JF - NATURE COMMUNICATIONS J2 - NAT COMMUN VL - 12 PY - 2021 IS - 1 PG - 9 SN - 2041-1723 DO - 10.1038/s41467-021-25582-8 UR - https://m2.mtmt.hu/api/publication/32361418 ID - 32361418 AB - There is great interest in the development of micromotors which can convert energy to motion in sub-millimeter dimensions. Micromachines take the micromotor concept a step further, comprising complex systems in which multiple components work in concert to effectively realize complex mechanical tasks. Here we introduce light-driven micromotors and micromachines that rely on optoelectronic tweezers (OET). Using a circular micro-gear as a unit component, we demonstrate a range of new functionalities, including a touchless micro-feed-roller that allows the programming of precise three-dimensional particle trajectories, multi-component micro-gear trains that serve as torque- or velocity-amplifiers, and micro-rack-and-pinion systems that serve as microfluidic valves. These sophisticated systems suggest great potential for complex micromachines in the future, for application in microrobotics, micromanipulation, microfluidics, and beyond.Light-driven micromotors can convert energy to motion in sub-millimeter dimensions. Here, the authors extend this concept and introduce reconfigurable micromachines with multiple components, driven by optoelectronic tweezers, and demonstrate new functionalities. LA - English DB - MTMT ER - TY - JOUR AU - Andrew, Philippa-Kate AU - Williams, Martin A. K. AU - Avci, Ebubekir TI - Optical Micromachines for Biological Studies JF - MICROMACHINES J2 - MICROMACHINES-BASEL VL - 11 PY - 2020 IS - 2 PG - 25 SN - 2072-666X DO - 10.3390/mi11020192 UR - https://m2.mtmt.hu/api/publication/31467931 ID - 31467931 N1 - Cited By :5 Export Date: 27 April 2021 Correspondence Address: Avci, E.; Department of Mechanical and Electrical Engineering, New Zealand; email: e.avci@massey.ac.nz AB - Optical tweezers have been used for biological studies since shortly after their inception. However, over the years research has suggested that the intense laser light used to create optical traps may damage the specimens being studied. This review aims to provide a brief overview of optical tweezers and the possible mechanisms for damage, and more importantly examines the role of optical micromachines as tools for biological studies. This review covers the achievements to date in the field of optical micromachines: improvements in the ability to produce micromachines, including multi-body microrobots; and design considerations for both optical microrobots and the optical trapping set-up used for controlling them are all discussed. The review focuses especially on the role of micromachines in biological research, and explores some of the potential that the technology has in this area. LA - English DB - MTMT ER - TY - CHAP AU - Bragheri, F. AU - Vázquez, R.M. AU - Osellame, R. TI - Microfluidics T2 - Three-Dimensional Microfabrication Using Two-Photon Polymerization PB - Elsevier SN - 9780128178270 PY - 2020 SP - 493 EP - 526 PG - 34 DO - 10.1016/B978-0-12-817827-0.00057-6 UR - https://m2.mtmt.hu/api/publication/31989293 ID - 31989293 N1 - Cited By :1 Export Date: 27 April 2021 AB - Microfluidics is the technology of fluid manipulation in channels with dimensions of tens of micrometers; it has emerged in recent years as a distinct new area of research thanks to its application in many diverse fields, such as chemistry, biology, medicine, and physical sciences. A strong motivation in microfluidic research comes from the development of lab-on-chip (LOC) devices, which are expected to bring a revolution in the field of chemistry and biology as integrated circuits did in computation capabilities. LOCs are microsystems capable of integrating entire biological or chemical laboratories in a single chip, thanks to the integration of microfluidic channels and active or passive components, such as filters, valves, mixers, and many others. The high level of integration required in LOCs creates a demand for advanced fabrication technologies that are capable of miniaturizing several key fluidic components with the aim of improving the compactness of these devices and their functionalities. In this framework, two-photon polymerization (2PP) represents a very interesting technology since it has unique three-dimensional capabilities, extreme resolution, and sufficient versatility to be combined with other microfabrication technologies. In this chapter, we will provide a brief summary of the basics of microfluidics to introduce the nonexpert reader to the main features of this discipline. Subsequently, we will present the fabrication of microfluidic networks by 2PP. Finally, we will provide an overview of the microfluidic components that can be produced by 2PP, such as microneedles, microfilters, micromixers, micropumps, microvalves, and photonic sensors. © 2020 Elsevier Inc. All rights reserved. LA - English DB - MTMT ER - TY - JOUR AU - Hamam, R. AU - Sabbah, Ali J. TI - Radiation force and torque exerted by linearly polarized plane waves on graded-index dielectric spheres JF - JOURNAL OF MODERN OPTICS J2 - J MOD OPTIC VL - 67 PY - 2020 IS - 3 SP - 279 EP - 286 PG - 8 SN - 0950-0340 DO - 10.1080/09500340.2020.1715499 UR - https://m2.mtmt.hu/api/publication/31467927 ID - 31467927 N1 - Cited By :1 Export Date: 27 April 2021 CODEN: JMOPE Correspondence Address: Hamam, R.; Math and Physics Department, Lebanon; email: rafif.hamam@liu.edu.lb AB - We propose and theoretically demonstrate, through numerical simulations, a model for a dielectric microsphere capable of being manipulated translationally and rotationally by linearly polarized plane electromagnetic waves. By the use of realistic material parameters and finite-element-method simulations of the Maxwell stress tensor, we illustrate how transverse radiation forces and radiation torques could be applied to the spherical particle through a proper control of the frequency and polarization direction of the incident linearly polarized plane wave. LA - English DB - MTMT ER - TY - JOUR AU - Harada, H. AU - Kaneko, M. AU - Ito, H. TI - Rotational manipulation of a microscopic object inside a microfluidic channel JF - BIOMICROFLUIDICS J2 - BIOMICROFLUIDICS VL - 14 PY - 2020 IS - 5 SN - 1932-1058 DO - 10.1063/5.0013309 UR - https://m2.mtmt.hu/api/publication/31989284 ID - 31989284 N1 - Export Date: 27 April 2021 Correspondence Address: Ito, H.; Department of Physics, Japan; email: ito@chiba-u.jp AB - Observations and analyses of a microscopic object are essential processes in various fields such as chemical engineering and life science. Microfluidic techniques with various functions and extensions have often been used for such purposes to investigate the mechanical properties of microscopic objects such as biological cells. One of such extensions proposed in this context is a real-time visual feedback manipulation system, which is composed of a high-speed camera and a piezoelectric actuator with a single-line microfluidic channel. Although the on-chip manipulation system enables us to control the 1 degree-of-freedom position of a target object by the real-time pressure control, it has suffered from unintended changes in the object orientation, which is out of control in the previous system. In this study, we propose and demonstrate a novel shear-flow-based mechanism for the control of the orientation of a target object in addition to the position control in a microchannel to overcome the problem of the unintended rotation. We designed a tributary channel using a three-dimensional hydrodynamic simulation with boundary conditions appropriate for the particle manipulation to apply shear stress to the target particle placed at the junction and succeeded in rotating the particle at an angular velocity of 0.2 rad/s even under the position control in the experiment. The proposed mechanism would be applied to feedback controls of a target object in a microchannel to be in a desired orientation and at a desired position, which could be a universally useful function for various microfluidic platforms. © 2020 Author(s). LA - English DB - MTMT ER - TY - CHAP AU - McKee, S. AU - Lutey, A.H.A. AU - Poli, F. AU - Selleri, S. AU - Romoli, L. AU - Fortunato, A. AU - Cucinotta, A. ED - Pietralunga, S.M. ED - Selleri, S. TI - 3D Printing by Two-Photon Polymerization PB - Institute of Electrical and Electronics Engineers (IEEE) SN - 9781728162393 PY - 2020 DO - 10.1109/ICOP49690.2020.9300308 UR - https://m2.mtmt.hu/api/publication/31989282 ID - 31989282 N1 - University of Parma, Department of Engineering and Architecture, Parma, Italy University of Bologna, Department of Industrian and Engineering, Bologna, Italy Export Date: 27 April 2021 AB - Compared with conventional microfabrication techniques, two-photon polymerization has attracted significant interest due to its capability of building arbitrary, complex and ultraprecise three-dimensional (3D) microstructures with sub-100 nm resolution. The process exploits femtosecond laser pulses and a photo resist that is transparent at the laser wavelength (515 nm) but absorbs two photons at high intensity to polymerize, resulting in the possibility of fabricating devices for advanced photonics and biomedical applications. In this paper, the manufacturing of 3D microstructures through two-photon polymerization is discussed. © 2020 IEEE. LA - English DB - MTMT ER - TY - JOUR AU - Min, C. AU - Yuan, Y. AU - Zhang, Y. AU - Wang, X. AU - Zhang, Z. AU - Yuan, X. TI - The hand of light for micro/nano-particle manipulation: research progress of optical tweezers JF - Shenzhen Daxue Xuebao (Ligong Ban)/Journal of Shenzhen University Science and Engineering J2 - Shenzhen Daxue Xuebao (Ligong Ban)/Journal of Shenzhen University Science and Engineering VL - 37 PY - 2020 IS - 5 SP - 441 EP - 458 PG - 18 SN - 1000-2618 DO - 10.3724/SP.J.1249.2020.05441 UR - https://m2.mtmt.hu/api/publication/31989280 ID - 31989280 N1 - Export Date: 27 April 2021 CODEN: SDXLE Correspondence Address: Yuan, X.; Shenzhen Key Laboratory of Micro-Scale Optical Information Technology, China; email: xcyuan@szu.edu.cn AB - Optical tweezer is an important technology for trapping and manipulating micro/nano-particles, which has widely been applied in physics, chemistry, biology, medicine and other fields. In this work, based on the research progresses in recent years, we systematically review the main research directions and representative achievements of optical tweezers. We introduce the theoretical basis about the mechanism of capturing objects and several common theoretical models of optical tweezers. According to the distribution of incident light beams, we classify the optical tweezers into structural beam optical tweezer, multi-beam and holographic optical tweezer, near-field evanescent wave tweezer, surface plasmon optical tweezer, optical fiber tweezer, opto-thermoelectric tweezer, femtosecond laser tweezer, and extraordinary optical forces tweezer. And the characteristics and latest developments of optical tweezers are discussed in detail respectively. In terms of innovative applications, we emphatically focus in the fields of biological sample manipulation, molecular detection, naked-eye three dimensional display, etc. In the final section, we provide a summary and prospect about the future development of optical tweezers technology. © 2020, Science Press. All right reserved. LA - Chinese DB - MTMT ER - TY - JOUR AU - Pan, Xuetao AU - Cai, Jianwen TI - Mechanism and Experimental Study of Femtosecond-Laser Super-Resolution Processing Based on Beam Shaping Technology JF - JOURNAL OF RUSSIAN LASER RESEARCH J2 - J RUSS LASER RES VL - 41 PY - 2020 IS - 2 SP - 129 EP - 140 PG - 12 SN - 1071-2836 DO - 10.1007/s10946-020-09858-w UR - https://m2.mtmt.hu/api/publication/31467925 ID - 31467925 N1 - Export Date: 27 April 2021 Correspondence Address: Xuetao, P.; School of Photoelectric Engineering, China; email: pxtpqz@163.com AB - The three-dimensional microsolid can be fabricated by scanning point-by-point inside the polymer material according to the predetermined trajectory in femtosecond-laser two-photon direct writing mode. In the process of machining, the shape and intensity distribution of focus spot are changed by some processing parameters, which affect the processing accuracy and surface quality. Based on Fresnel diffraction theory and the intensity distribution function of focal spot, the focal spot shape is simulated and the main factors affecting the light intensity distribution are analyzed theoretically and simulated numerically. We propose a shaping method to improve the asymmetric shape of the facula by adding a prefocusing lens. According to the mechanism of femtosecond-laser super-resolution processing, we propose a beam shaping method using four-ring complex transmittance phase plate to achieve super-resolution processing. The phase plate was optimized on the global optimization algorithm and genetic algorithm. The validation experiment was carried out by scanning the photochromic material film with pulsed laser and reading the fluorescence signal of the photochromic point with single photon confocal. The experimental results show that the facula distribution is approximately symmetrical, and the size of facula is decreased obviously. The compression ratio is basically consistent with the theoretical calculation results. Therefore, super-resolution processing can be achieved by adding pre-focusing lens and phase plate to shaping the laser beam. The results of theoretical and experimental studies provide sufficient basis for improving the machining accuracy and surface quality of microdevices. LA - English DB - MTMT ER - TY - JOUR AU - Plumadore, A. AU - Harris, A. L. TI - Projectile transverse momentum controls emission in electron vortex ionization collisions JF - JOURNAL OF PHYSICS B: ATOMIC MOLECULAR AND OPTICAL PHYSICS J2 - J PHYS B AT MOL OPT PH VL - 53 PY - 2020 IS - 20 PG - 7 SN - 0953-4075 DO - 10.1088/1361-6455/abb3ac UR - https://m2.mtmt.hu/api/publication/31685945 ID - 31685945 N1 - Export Date: 27 April 2021 CODEN: JPAPE Correspondence Address: Harris, A.L.; Physics Department, United States; email: alharri@ilstu.edu AB - The realization of electron vortex (EV) beams in the past decade has led to numerous proposed applications in fields from electron microscopy to control and manipulation of individual molecules. Yet despite the many unique characteristics and promising advantages of EV beams, such as transverse momentum and quantized orbital angular momentum, there remains a limited understanding of their fundamental interactions with matter at the atomic scale. Collisions between EV projectiles and atomic targets can provide some insight into these interactions and we present here fully differential cross sections (FDCS) for ionization of excited state atomic hydrogen targets using EV projectiles. We show that the projectile's transverse momentum causes the ionized electron angular distributions to be altered compared to non-vortex projectiles and that the ionized electron's ejection angle can be controlled by adjustment of the vortex opening angle, a feature unique to vortex projectiles. Additionally, an inherent uncertainty in the projectile's momentum transfer leads to a broadening of the classical binary peak, making signatures of the target electron density more readily observable. FDCS for aligned 2p targets exhibit structures can be used to determine the alignment. LA - English DB - MTMT ER - TY - JOUR AU - Ruchi, null AU - Senthilkumaran, P. AU - Pal, Sushanta Kumar TI - Phase Singularities to Polarization Singularities JF - INTERNATIONAL JOURNAL OF OPTICS J2 - INT J OPT VL - 2020 PY - 2020 PG - 33 SN - 1687-9392 DO - 10.1155/2020/2812803 UR - https://m2.mtmt.hu/api/publication/31447729 ID - 31447729 N1 - Cited By :3 Export Date: 11 May 2021 Correspondence Address: Senthilkumaran, P.; Department of Physics, India; email: psenthilk@yahoo.com AB - Polarization singularities are superpositions of orbital angular momentum (OAM) states in orthogonal circular polarization basis. The intrinsic OAM of light beams arises due to the helical wavefronts of phase singularities. In phase singularities, circulating phase gradients and, in polarization singularities, circulating phi(12) Stokes phase gradients are present. At the phase and polarization singularities, undefined quantities are the phase and phi(12) Stokes phase, respectively. Conversion of circulating phase gradient into circulating Stokes phase gradient reveals the connection between phase (scalar) and polarization (vector) singularities. We demonstrate this by theoretically and experimentally generating polarization singularities using phase singularities. Furthermore, the relation between scalar fields and Stokes fields and the singularities in each of them is discussed. This paper is written as a tutorial-cum-review-type article keeping in mind the beginners and researchers in other areas, yet many of the concepts are given novel explanations by adopting different approaches from the available literature on this subject. LA - English DB - MTMT ER - TY - CHAP AU - Taniguchi, S. AU - Maruo, S. TI - Remotely driven micromachines produced by two-photon microfabrication T2 - Three-Dimensional Microfabrication Using Two-Photon Polymerization PB - Elsevier SN - 9780128178270 PY - 2020 SP - 475 EP - 492 PG - 18 DO - 10.1016/B978-0-12-817827-0.00056-4 UR - https://m2.mtmt.hu/api/publication/31989292 ID - 31989292 N1 - Cited By :1 Export Date: 27 April 2021 AB - In this chapter, we introduce remotely driven micromachines produced by the combination of two-photon microfabrication and electroless plating. First, we show two kinds of fabrication processes of metallized micromachines with anchor supports and without anchor supports. Next we demonstrate the optical driving of metallized micromachines such as a cross-shaped microrotor and a turbine using a scanning laser beam. Then, magnetically driven micromachines are produced by electroless magnetite plating. © 2020 Elsevier Inc. All rights reserved. LA - English DB - MTMT ER - TY - JOUR AU - Vaippully, Rahul AU - Gummaluri, Venkata Siva AU - Vijayan, C. AU - Roy, Basudev TI - Validity of cylindrical approximation for spherical birefringent microparticles in rotational optical tweezers JF - JOURNAL OF PHYSICS COMMUNICATIONS J2 - J PHYSICS COMM VL - 4 PY - 2020 IS - 1 PG - 5 SN - 2399-6528 DO - 10.1088/2399-6528/ab634c UR - https://m2.mtmt.hu/api/publication/31467922 ID - 31467922 N1 - Export Date: 27 April 2021 Correspondence Address: Roy, B.; Department of Physics, India; email: basudev@iitm.ac.in AB - Rotational manipulation of microscopic birefringent particles has conventionally been done by manoeuvring the polarization of the trapping light in optical tweezers. The torque on the particle is a sum of contributions from the linear polarization and the circular polarization, while assuming that the difference in optical path lengths between the extraordinary and the ordinary components of polarization depends upon the wavelength of light, the thickness of the particle and the birefringence. Generally, the thickness of spherical microparticles is assumed to be the diameter which renders the particle appear cylindrical. We test this hypothesis for sizes relevant towards optical tweezers manipulation. We find that for a range of particles from the Rayleigh regime to the early Mie regime, the approximation holds good. LA - English DB - MTMT ER - TY - CHAP AU - Varapnickas, S. AU - Žukauskas, A. AU - Brasselet, E. AU - Juodkazis, S. AU - Malinauskas, M. TI - 3D microoptics via ultrafast laser writing: Miniaturization, integration, and multifunctionalities T2 - Three-Dimensional Microfabrication Using Two-Photon Polymerization PB - Elsevier SN - 9780128178270 PY - 2020 SP - 445 EP - 474 PG - 30 DO - 10.1016/B978-0-12-817827-0.00012-6 UR - https://m2.mtmt.hu/api/publication/31989294 ID - 31989294 N1 - Laser Research Center (LRC), Vilnius University, Vilnius, Lithuania University Bordeaux, CNRS, LOMA, Talence, France Centre for Micro-Photonics, Swinburne University of Technology, Hawthorn, VIC, Australia Melbourne Centre for Nanofabrication (MCN), Australian National Fabrication Facility (ANFF), Clayton, VIC, Australia Cited By :1 Export Date: 27 April 2021 AB - Trends of evolving technology usually are based on miniaturization and increasing complexity of devices or combining both of them. Three-dimensional (3D) laser structuring of materials employing ultrashort pulses is widely used in photopolymer rapid prototyping spanning microoptical elements, optical actuators, microfluidic chips, scaffolds for cell growth and tissue engineering, templates for plasmonic metamaterials, and photonic crystals (PhC). It is one of the most precise additive manufacturing technologies ever developed in both scientific and industrial fields. Despite already appearing as commercially available setup still some active engineering is being carried out, for instance, implementation of active autofocusing and machine vision for sample detection and positioning. In order to achieve resolution of structuring required for microoptical and PhC structures operational at visible spectral range, the feature dimensions should be controlled with 10 nm spatial precision. Despite recent advances in techniques’ versatility, regarding specifically optical applications, the research inherits some gaps due to an initial pure engineering approach to 3D fabrication. For instance, the materials designed for 3D direct laser writing (DLW) are not fully (or barely at all) characterized and their optical performance and reliability have to be established. Thus, despite the DLW technique being mature and commercially available, some standard knowledge for its application in fabricating microoptical and photonic devices must be considerably improved, namely, the linear and nonlinear properties of the material itself, its modulation due to DLW structuring and postprocessing, taking into account various side effects and artifacts, e.g., an optical resistance. These investigation vectors are currently actively performed by many research groups. © 2020 Elsevier Inc. All rights reserved. LA - English DB - MTMT ER - TY - JOUR AU - Vizsnyiczai, Gaszton AU - Búzás, András AU - Aekbote Lakshman Rao, Badri AU - Fekete, Tamás AU - Grexa, István AU - Ormos, Pál AU - Kelemen, Lóránd TI - Multiview microscopy of single cells through microstructure-based indirect optical manipulation JF - BIOMEDICAL OPTICS EXPRESS J2 - BIOMED OPT EXPRESS VL - 11 PY - 2020 IS - 2 SP - 945 EP - 962 PG - 18 SN - 2156-7085 DO - 10.1364/BOE.379233 UR - https://m2.mtmt.hu/api/publication/31142384 ID - 31142384 LA - English DB - MTMT ER - TY - JOUR AU - Ye, Junhong AU - Wilson, Daniela A. AU - Tu, Yingfeng AU - Peng, Fei TI - 3D-Printed Micromotors for Biomedical Applications JF - ADVANCED MATERIALS TECHNOLOGIES J2 - ADV MATER TECHNOL-US PY - 2020 PG - 16 SN - 2365-709X DO - 10.1002/admt.202000435 UR - https://m2.mtmt.hu/api/publication/31498068 ID - 31498068 N1 - School of Materials Science and Engineering, Sun-Yat-sen University, Guangzhou, 510275, China Institute for Molecules and Materials, Radboud University, Nijmegen, AJ 6525, Netherlands School of Pharmaceutical Science, Guangdong Provincial Key Laboratory of New Drug Screening, Southern Medical University, Guangzhou, 510515, China Export Date: 22 September 2020 Correspondence Address: Peng, F.; School of Materials Science and Engineering, Sun-Yat-sen University, Institute for Molecules and Materials, Radboud University, School of Pharmaceutical Science, Guangdong Provincial Key Laboratory of New Drug Screening, Southern Medical UniversityChina; email: pengf26@mail.sysu.edu.cn School of Materials Science and Engineering, Sun-Yat-sen University, Guangzhou, 510275, China Institute for Molecules and Materials, Radboud University, Nijmegen, AJ 6525, Netherlands School of Pharmaceutical Science, Guangdong Provincial Key Laboratory of New Drug Screening, Southern Medical University, Guangzhou, 510515, China Cited By :1 Export Date: 27 April 2021 Correspondence Address: Peng, F.; School of Materials Science and Engineering, China; email: pengf26@mail.sysu.edu.cn Correspondence Address: Wilson, D.A.; Institute for Molecules and Materials, Netherlands; email: d.wilson@science.ru.nl Correspondence Address: Tu, Y.; School of Pharmaceutical Science, China; email: tuyingfeng1@smu.edu.cn AB - Additive manufacturing, known as 3D printing, has been widely applied in various fields owing to the development of 3D printing materials and 3D printing techniques. Compared with other fabrication approaches, 3D printing possesses the advantages of high resolution, high accuracy, unique customizability, and repeatability. Therefore, 3D printing can be widely used to fabricate various microstructures, including micromotors, which are capable of converting external energies into motion and subsequently accomplishing various functions. To date, five types of 3D printing techniques have been used to fabricate self-propelled micromotors with different structures, ingredients, and functions. This progress report summarizes 3D printing techniques for the fabrication of micromotors and introduces the potential biomedical applications of 3D printed micromotors. The advantages and disadvantages of each typical 3D printing method are discussed as well. LA - English DB - MTMT ER - TY - JOUR AU - Zhang, Yu AU - Lin, Siyu AU - Liu, Zhihai AU - Zhang, Yaxun AU - Zhang, Jianzhong AU - Yang, Jun AU - Yuan, Libo TI - Laser-induced rotary micromotor with high energy conversion efficiency JF - PHOTONICS RESEARCH J2 - PHOTONICS RES VL - 8 PY - 2020 IS - 4 SP - 534 EP - 538 PG - 5 SN - 2327-9125 DO - 10.1364/PRJ.381397 UR - https://m2.mtmt.hu/api/publication/31467929 ID - 31467929 N1 - Key Laboratory of In-fiber Integrated Optics, Ministry of Education, Harbin Engineering University, Harbin, 150001, China National Demonstration Center for Experimental Physics Education, Harbin Engineering University, Harbin, 150001, China Photonics Research Center, Guilin University of Electronics Technology, Guilin, 541004, China Cited By :1 Export Date: 27 April 2021 Correspondence Address: Zhang, Y.; Key Laboratory of In-fiber Integrated Optics, China; email: zhangyaxun@hrbeu.edu.cn AB - Light is a precious resource that nature has given to human beings. Converting green, recyclable light energy into the mechanical energy of a micromotor is undoubtedly an exciting challenge. However, the performance of current light-induced micromotor devices is unsatisfactory, as the light-to-work conversion efficiency is only 10(-15)-10(-12). In this paper, we propose and demonstrate a laser-induced rotary micromotor operated by Delta alpha-type photopheresis in pure liquid glycerol, whose energy conversion ratio reaches as high as 10(-9), which is 3-6 orders of magnitude higher than that of previous light-induced micromotor devices. In addition, we operate the micromotor neither with a light field carrying angular momentum nor with a rotor with a special rotating symmetrical shape. We just employ an annular-core fiber to configure a conical-shaped light field and select a piece of graphite sheet (with an irregular shape) as the micro-rotor. The Delta alpha-type photophoretic force introduced by the conical-shaped light field drives the rotation of the graphite sheet. We achieve a rotation rate up to 818.2 r/min, which can be controlled by tuning the incident laser power. This optical rotary micromotor is available for twisting macromolecules or generating vortex and shear force in a medium at the nanoscale. (C) 2020 Chinese Laser Press LA - English DB - MTMT ER - TY - JOUR AU - Zhao, Wendi AU - Cheng, Wenjing AU - Liang, Guo TI - Spacing dependent interaction of vortex dipole and induced off-axis propagations of optical energy JF - OPTIK: INTERNATIONAL JOURNAL FOR LIGHT AND ELECTRON OPTICS J2 - OPTIK VL - 202 PY - 2020 PG - 7 SN - 0030-4026 DO - 10.1016/j.ijleo.2019.163729 UR - https://m2.mtmt.hu/api/publication/31467923 ID - 31467923 N1 - Export Date: 27 April 2021 Correspondence Address: Liang, G.; School of Physics and Electrical Information, China; email: liangguo0916@163.com AB - Discussed analytically is the dynamics of a vortex dipole embedded in an elliptic Gaussian beam. Two opposite charged vortices of the vortex dipole can repel or attract each other, depending on whether their initial spacing larger or smaller than the critical value. While, stable vortex dipole with invariant spacing is predicated to exist at critical initial spacing. The critical spacing is dramatically related with the host elliptic beam. Furthermore, the dynamics of the vortex dipole can result in an off-axis propagation of optical beams, with propagating directions normal to the orientations of the vortex dipole. The optical beam exhibits larger off-axis velocity when the vortex dipole is parallel to the major axis of the host elliptic beam. The off-axis velocity can be further enhanced by increasing the ellipticity of host beams. The theoretical results can provide a controllable approach to change the propagating directions of optical beams by adjusting the initial spacing of vortex dipoles. LA - English DB - MTMT ER - TY - JOUR AU - Zheng, Chenglin AU - Jin, Feng AU - Zhao, Yuanyuan AU - Zheng, Meiling AU - Liu, Jie AU - Dong, Xianzi AU - Xiong, Zhong AU - Xia, Yanzhi AU - Duan, Xuanming TI - Light-driven micron-scale 3D hydrogel actuator produced by two-photon polymerization microfabrication JF - SENSORS AND ACTUATORS B-CHEMICAL J2 - SENSOR ACTUAT B CHEM VL - 304 PY - 2020 PG - 9 SN - 0925-4005 DO - 10.1016/j.snb.2019.127345 UR - https://m2.mtmt.hu/api/publication/31435422 ID - 31435422 N1 - College of Chemistry and Chemical Engineering, College of Materials Science and Engineering, Qingdao University, Qingdao, 266071, China Institute of Marine Biobased Materials, Shandong Collaborative Innovation Center of Marine Biobased Fibers and Ecological textiles, State Key Laboratory of Bio-fibers and Eco-textiles, Qingdao University, Qingdao, 266071, China Laboratory of Organic NanoPhotonics and CAS Key Laboratory of Bio-Inspired Materials and Interfacial Science, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, No. 29, Zhongguancun East Road, Beijing, 100190, China Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Institute of Photonics Technology, Jinan University, 855 East Xingye Avenue, Panyu District, Guangzhou, 511443, China Cited By :5 Export Date: 4 February 2021 CODEN: SABCE Correspondence Address: Xiong, Z.; College of Chemistry and Chemical Engineering, China; email: xiongzhong22@163.com Funding details: Natural Science Foundation of Shandong Province, ZR2012EMQ006 Funding details: National Basic Research Program of China (973 Program), 2016YFA0200501 Funding details: National Natural Science Foundation of China, NSFC, 51673208, 61405100 Funding text 1: This work was supported by the National Natural Science Foundation of China ( 61405100 and 51673208 ), the Natural Science Foundation of Shandong Province ( ZR2012EMQ006 ), the National Key Research and Development Program of China (Grant No. 2016YFA0200501 ). Appendix A Funding Agency and Grant Number: National Natural Science Foundation of ChinaNational Natural Science Foundation of China (NSFC) [61405100, 51673208]; Natural Science Foundation of Shandong ProvinceNatural Science Foundation of Shandong Province [ZR2012EMQ006]; National Key Research and Development Program of China [2016YFA0200501] Funding text: This work was supported by the National Natural Science Foundation of China (61405100 and 51673208), the Natural Science Foundation of Shandong Province (ZR2012EMQ006), the National Key Research and Development Program of China (Grant No. 2016YFA0200501). College of Chemistry and Chemical Engineering, College of Materials Science and Engineering, Qingdao University, Qingdao, 266071, China Institute of Marine Biobased Materials, Shandong Collaborative Innovation Center of Marine Biobased Fibers and Ecological textiles, State Key Laboratory of Bio-fibers and Eco-textiles, Qingdao University, Qingdao, 266071, China Laboratory of Organic NanoPhotonics and CAS Key Laboratory of Bio-Inspired Materials and Interfacial Science, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, No. 29, Zhongguancun East Road, Beijing, 100190, China Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Institute of Photonics Technology, Jinan University, 855 East Xingye Avenue, Panyu District, Guangzhou, 511443, China Cited By :7 Export Date: 27 April 2021 CODEN: SABCE Correspondence Address: Xiong, Z.; College of Chemistry and Chemical Engineering, China; email: xiongzhong22@163.com AB - Light-driven micro/nano-actuators are one of the most important topics in the biomedical micro-electromechanical systems (MEMS) field. Currently, their development is hampered due to the difficulties in designing and fabricating biocompatible light-driven microactuators with the dimensions less than one hundred micrometres and a response time in the order of seconds. In this work, gel photoresists were prepared by embedding photothermal surface-modified Fe3O4 nanoparticles (NPs) into a mixture that included a photoinitiator, photosensitizer, monomers, crosslinkers and solvents. Macroscopic poly(N-isopropylacrylamide) (PNIPAM)/nanoFe(3)O(4) hydrogels were prepared by ultraviolet photopolymerization of gel photoresists, which showed good temperature-responsive volume changes and light-triggered bending deformation. Then the two-photon polymerization (TPP) microfabrication properties of gel photoresists with 0, 0.48 and 0.95 wt% Fe3O4 NPs were investigated in detail. Importantly, after the TPP microfabrication and subsequent solvent-exchange procedure, a double-armed near-infrared (NIR)-light-driven three-dimensional (3D) hydrogel microcantilever with a size of similar to 26 mu m was successfully fabricated. The hydrogel microactuator had a fast response time of similar to 0.033 s in water under NIR radiation and showed good reversibility. Furthermore, the distance between the two arms of the hydrogel microcantilever could be manipulated by controlling the laser focus and incident laser power. LA - English DB - MTMT ER - TY - JOUR AU - Zuev, D.M. AU - Nguyen, A.K. AU - Putlyaev, V.I. AU - Narayan, R.J. TI - 3D printing and bioprinting using multiphoton lithography JF - BIOPRINTING J2 - BIOPRINTING VL - 20 PY - 2020 SN - 2405-8866 DO - 10.1016/j.bprint.2020.e00090 UR - https://m2.mtmt.hu/api/publication/31606961 ID - 31606961 N1 - Department of Materials Science, Lomonosov Moscow State University, Russian Federation Department of Biomedical Engineering, North Carolina State University, United States Export Date: 22 September 2020 Correspondence Address: Narayan, R.J.; Joint Department of Biomedical Engineering, University of North Carolina and North Carolina State UniversityUnited States; email: roger_narayan@unc.edu Department of Materials Science, Lomonosov Moscow State University, Russian Federation Department of Biomedical Engineering, North Carolina State University, United States Cited By :1 Export Date: 27 April 2021 Correspondence Address: Narayan, R.J.; Joint Department of Biomedical Engineering, United States; email: roger_narayan@unc.edu AB - 3D printing based on multiphoton absorption is playing a growing role in biomedical engineering and regenerative medicine. Multiphoton lithography is a 3D printing approach that is based on the multiphoton absorption process. The review focuses on the use of multiphoton lithography to create microneedles, microfluidic devices, nanoprobes, filters, and tissue engineering scaffolds with sub-micrometer scale features. The fundamental requirements of the multiphoton absorption process are described. Efforts to increase the processing rate as well as understand the bioresorbability of multiphoton lithography-created structures are discussed. Improvements to the biocompatibility of the polymers and photoinitiators used in multiphoton lithography are considered. The multiphoton lithography process offers unique opportunities to process tissue engineering scaffolds with small-scale features. © 2020 Elsevier B.V. LA - English DB - MTMT ER - TY - JOUR AU - Askari, M. AU - Tuck, C. J. AU - Hu, Q. AU - Hague, R. J. M. AU - Wildman, R. D. TI - Multimaterial Manufacture Through Combining Optical Tweezers with Multiphoton Fabrication JF - JOURNAL OF LASER MICRO NANOENGINEERING J2 - J LASER MICRO NANOEN VL - 14 PY - 2019 IS - 1 SP - 80 EP - 87 PG - 8 SN - 1880-0688 DO - 10.2961/jlmn.2019.01.0014 UR - https://m2.mtmt.hu/api/publication/30912459 ID - 30912459 N1 - Cited By :2 Export Date: 27 April 2021 Correspondence Address: Askari, M.; Faculty of Engineering, University Park, United Kingdom; email: Meisam.askari@nottingham.ac.uk AB - Multi-Photon Polymerization (MPP) is a technique used to fabricate complex micro-scale 3D structures using ultra-short laser pulses. Typically, MPP is used to manufacture micron-scale components in photopolymer materials. However, the development of micron scale processes that can produce components from multiple materials within a single manufacturing step would be advantageous. This would allow the inclusion of particles that are manipulated and embedded within structures with sub-micron feature sizes. To achieve this, an MPP system was combined with an optical trapping (OT) setup in order to independently manipulate microparticles in the x, y and z planes. Particles were transported into the fabrication site using the OT and encapsulated using the MPP laser. Here it is shown that combining the OT capabilities with an additive manufacturing technique enables the production of complex multi-material artifacts. LA - English DB - MTMT ER - TY - JOUR AU - Babiker, Mohamed AU - Andrews, David L. AU - Lembessis, Vassilis E. TI - Atoms in complex twisted light JF - JOURNAL OF OPTICS J2 - J OPTICS-UK VL - 21 PY - 2019 IS - 1 PG - 67 SN - 2040-8978 DO - 10.1088/2040-8986/aaed14 UR - https://m2.mtmt.hu/api/publication/30512781 ID - 30512781 N1 - Cited By :40 Export Date: 27 April 2021 AB - The physics of optical vortices, also known as twisted light, is now a well-established and a growing branch of optical physics with a number of important applications and significant interdisciplinary connections. Optical vortex fields of widely varying forms and degrees of complexity can be realised in the laboratory by a host of different means. The interference between such beams with designated orbital angular momenta and optical spins (the latter is associated with wave polarisations) can be structured to conform to various geometrical arrangements. The focus of this review is on how such tailored forms of light can exert a controllable influence on atoms with which they interact. The main physical effects involve atoms in motion due to application of optical forces. The now mature area of atom optics has had notable successes both of fundamental nature and in applications such as atom lasers, atom guides and Bose-Einstein condensates. The concepts in atom optics encompass not only atomic beams interacting with light, but atomic motion in general as influenced by optical and other fields. Our primary concern in this review is on atoms in structured light where, in particular, the twisted nature of the light is made highly complex with additional features due to wave polarisation. These features bring to the fore a variety of physical phenomena not realisable in the context of atomic motion in more conventional forms of laser light. Atoms near resonance with such structured light fields become subject to electromagnetic fields with complex polarisation and phase distributions, as well as intricately structured intensity gradients and radiative forces. From the combined effect of optical spin and orbital angular momenta, atoms may also experience forces and torques involving an interplay between the internal and centre of mass degrees of freedom. Such interactions lead to new forms of processes including scattering, trapping and rotation and, as a result, they exhibit characteristic new features at the micro-scale and below. A number of distinctive properties involving angular momentum exchange between the light and the atoms are highlighted, and prospective applications are discussed. Comparison is made between the theoretical predictions in this area and the corresponding experiments that have been reported to date. LA - English DB - MTMT ER - TY - JOUR AU - Balciunas, Evaldas AU - Baldock, Sara J. AU - Dreize, Nadezda AU - Grubliauskaite, Monika AU - Coultas, Sarah AU - Rochester, David L. AU - Valius, Mindaugas AU - Hardy, John G. AU - Baltriukiene, Daiva TI - 3D printing hybrid organometallic polymer-based biomaterials via laser two-photon polymerization JF - POLYMER INTERNATIONAL J2 - POLYM INT VL - 68 PY - 2019 IS - 11 SP - 1928 EP - 1940 PG - 13 SN - 0959-8103 DO - 10.1002/pi.5909 UR - https://m2.mtmt.hu/api/publication/30912450 ID - 30912450 N1 - Institute of Biochemistry, Life Sciences Centre, Vilnius University, Vilnius, Lithuania Department of Chemistry, Lancaster University, Lancaster, United Kingdom Materials Science Institute, Lancaster University, Lancaster, United Kingdom Kratos Analytical Ltd, Manchester, United Kingdom Cited By :6 Export Date: 27 April 2021 Correspondence Address: Hardy, J.G.; Department of Chemistry, United Kingdom; email: j.g.hardy@lancaster.ac.uk AB - Materials with microscale structures are gaining increasing interest due to their range of technical and medical applications. Additive manufacturing approaches to such objects via laser two-photon polymerization, also known as multiphoton fabrication, enable the creation of new materials with diverse and tunable properties. Here, we investigate the properties of 3D structures composed of organometallic polymers incorporating aluminium, titanium, vanadium and zirconium. The organometallic polymer-based materials were analysed using a variety of techniques including SEM, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy analysis and contact angle measurements and their biocompatibility was tested in vitro. Cell viability and mode of death were determined by 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay and acridine orange/ethidium bromide staining. Polymers incorporating Al, Ti and Zr supported cell adhesion and proliferation, and showed low toxicity in vitro, whereas the organometallic polymer incorporating V was shown to be cytotoxic. Inductively coupled plasma optical emission spectrometry suggested that leaching of the V from the organometallic polymer is the likely cause of this. The preparation of the organometallic polymers is straightforward and both simple 2D and complex 3D structures can be fabricated with ease. Resolution tests of the newly developed organometallic polymer incorporating Al show that suspended lines with widths down to 200 nm can be fabricated. We believe that the materials described in this work show promising properties for the development of objects with sub-micron features for biomedical applications (e.g. biosensors, drug delivery devices, tissue scaffolds etc.). (c) 2019 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry. LA - English DB - MTMT ER - TY - CHAP AU - Barroso, A. AU - Meissner, R. AU - Oliver, N. AU - Denz, C. TI - Optical trapping and optomechanically-assisted assembly of non-spherical nanocontainers T2 - Biophotonics Congress: Optics in the Life Sciences Congress 2019 (BODA,BRAIN,NTM,OMA,OMP) PB - Optical Society of America (OSA) CY - Washington DC SN - 9781943580545 PY - 2019 SP - . UR - https://m2.mtmt.hu/api/publication/31989291 ID - 31989291 N1 - Export Date: 27 April 2021 Correspondence Address: Denz, C.; Institute of Applied Physics, Germany; email: denz@uni-muenster.de AB - While spherical particles have been widely used as probes for optical trapping, nonspherical objects are only rarely considered though they exhibit important features for biocompatible trapping scenarios or complex assemblies. Here, we demonstrate the use of nonspherical nanocontainers as probes for force sensing and as basic building blocks for complex assemblies. Employing holographic optical tweezers, arbitrary nanoarchitectures are optomechanically fabricated, among them dynamic optical waveguides or permanent microconstructions. © 2019 The Author(s). LA - English DB - MTMT ER - TY - CHAP AU - Bhat, A.V. AU - Parthasarathi, P. AU - Iyengar, S.S. AU - Yendeti, B. AU - Mohana, D.C. AU - Vudayagiri, A. AU - Ananthamurthy, S. ED - Rao, C.S.P. ED - Basavarajappa, S. TI - Rotational dynamics of Bacillus subtilis in an optical trap VL - 577 PB - IOP Publishing Ltd T3 - IOP Conference Series, ISSN 1757-8981 ; 577. PY - 2019 IS - 1 DO - 10.1088/1757-899X/577/1/012046 UR - https://m2.mtmt.hu/api/publication/31989288 ID - 31989288 N1 - Department of Physics, Bangalore University, Bangalore, 560056, India Advance Center of Research in High Energy Materials, University of Hyderabad, Hyderabad, 500046, India Department of Microbiology, Bangalore University, Bangalore, 560056, India School of Physics, University of Hyderabad, Hyderabad, 500046, India Export Date: 27 April 2021 Correspondence Address: Ananthamurthy, S.; Department of Physics, India; email: asharath@gmail.com AB - The swimming of a bacterium in fluids occurs in a low Reynolds number regime. The ability to confine the swimming motion by trapping a bacterium in laser light, can give information on the propulsion coefficients, which are important in explaining the efficiency of swimming of these bacteria. In this work, we report the results of an optically trapped Bacillus subtilis in an optical tweezer and the studies on the rotatory motion of the bacterium. The data is gathered and analysed using video microscopy. The propulsion coefficients of such swimming bacterium are determined through a power spectral analysis of the rotatory motion of the bacterium in the trap. © Published under licence by IOP Publishing Ltd. LA - English DB - MTMT ER - TY - JOUR AU - Bunea, Ada-Ioana AU - Gluckstad, Jesper TI - Strategies for Optical Trapping in Biological Samples: Aiming at Microrobotic Surgeons JF - LASER & PHOTONICS REVIEWS J2 - LASER PHOTONICS REV VL - 13 PY - 2019 IS - 4 PG - 17 SN - 1863-8880 DO - 10.1002/lpor.201800227 UR - https://m2.mtmt.hu/api/publication/30908172 ID - 30908172 N1 - Cited By :18 Export Date: 27 April 2021 Correspondence Address: Bunea, A.-I.; DTU Fotonik, Denmark; email: adabu@dtu.dk AB - Optical trapping and manipulation of objects down to the Angstrom level has revolutionized research at the smallest scales in all natural sciences. The flexibility of optical trapping methods facilitates real-time monitoring of the dynamics of biological processes in model systems and even in living cells. Different optical trapping and manipulation approaches allow displacement of nanostructures with subnanometer precision and force measurements with femtonewton precision. Due to inherent constraints of optical methods, most optical trapping experiments are performed in water or simple aqueous solutions. However, in recent years, there is an ever-growing interest of shifting from simple aqueous media towards more biologically-relevant media. Precise optical trapping and manipulation, combined with state-of-the-art microfabrication, will enable the development of microrobotic "surgeons" with tremendous potential for biomedical and microengineering applications. This review introduces the basics of optical trapping and discusses its applications for biological samples, with focus on trapping in biological media and strategies for overcoming the challenges of optical manipulation in complex environments as a stepping-stone for microrobotic "surgeons." LA - English DB - MTMT ER - TY - JOUR AU - Chizari, Samira AU - Shaw, Lucas A. AU - Hopkins, Jonathan B. TI - Simultaneous printing and deformation of microsystems via two-photon lithography and holographic optical tweezers JF - MATERIALS HORIZONS J2 - MATER HORIZ VL - 6 PY - 2019 IS - 2 SP - 350 EP - 355 PG - 6 SN - 2051-6347 DO - 10.1039/c8mh01100a UR - https://m2.mtmt.hu/api/publication/30912460 ID - 30912460 N1 - Cited By :11 Export Date: 27 April 2021 Correspondence Address: Hopkins, J.B.; Department of Mechanical and Aerospace Engineering, United States; email: hopkins@seas.ucla.edu AB - The purpose of this work is to enable the simultaneous printing and deformation of polymer microsystems using an integrated two-photon lithography (TPL) and holographic optical tweezers (HOT) approach. This approach is the first of its kind to enable the fabrication of advanced metamaterials, micromechanisms, soft microrobots, and sensors that require embedded strain energy in their constituent compliant elements to achieve their intended behaviors. We introduce a custom-developed photopolymer chemistry that is suitable for near-infrared (NIR) TPL fabrication but remains unreactive in the visible-light regime for HOT-based handling. We facilitated the optimal HOT-based actuation of TPL-fabricated microsystems by advancing a ray-optics-based optical-force simulation tool to work with microbodies of any arbitrary shape. We demonstrate the utility of this integrated system via fabrication of three unique case studies, which could not be achieved using any alternative technologies. LA - English DB - MTMT ER - TY - JOUR AU - Favre-Bulle, Itia A. AU - Stilgoe, Alexander B. AU - Scott, Ethan K. AU - Rubinsztein-Dunlop, Halina TI - Optical trapping in vivo: theory, practice, and applications JF - NANOPHOTONICS J2 - NANOPHOTONICS-BERLIN VL - 8 PY - 2019 IS - 6 SP - 1023 EP - 1040 PG - 18 SN - 2192-8606 DO - 10.1515/nanoph-2019-0055 UR - https://m2.mtmt.hu/api/publication/30797206 ID - 30797206 N1 - School of Mathematics and Physics, University of Queensland, St Lucia, QLD 4072, Australia School of Biomedical Sciences, University of Queensland, St Lucia, QLD 4072, Australia Queensland Brain Institute, University of Queensland, St Lucia, QLD 4072, Australia Export Date: 12 September 2019 Correspondence Address: Favre-Bulle, I.A.; School of Mathematics and Physics, University of QueenslandAustralia; email: i.favrebulle@uq.edu.au School of Mathematics and Physics, University of Queensland, St Lucia, QLD 4072, Australia School of Biomedical Sciences, University of Queensland, St Lucia, QLD 4072, Australia Queensland Brain Institute, University of Queensland, St Lucia, QLD 4072, Australia Cited By :24 Export Date: 27 April 2021 Correspondence Address: Favre-Bulle, I.A.; School of Mathematics and Physics, Australia; email: i.favrebulle@uq.edu.au AB - Since the time of their introduction, optical tweezers (OTs) have grown to be a powerful tool in the hands of biologists. OTs use highly focused laser light to guide, manipulate, or sort target objects, typically in the nanoscale to microscale range. OTs have been particularly useful in making quantitative measurements of forces acting in cellular systems; they can reach inside living cells and be used to study the mechanical properties of the fluids and structures that they contain. As all the measurements are conducted without physically contacting the system under study, they also avoid complications related to contamination and tissue damage. From the manipulation of fluorescent nanodiamonds to chromosomes, cells, and free-swimming bacteria, OTs have now been extended to challenging biological systems such as the vestibular system in zebrafish. Here, we will give an overview of OTs, the complications that arise in carrying out OTs in vivo, and specific OT methods that have been used to address a range of otherwise inaccessible biological questions. LA - English DB - MTMT ER - TY - JOUR AU - Gross, Andrew J. AU - Bertoldi, Katia TI - Additive Manufacturing of Nanostructures That Are Delicate, Complex, and Smaller than Ever JF - SMALL J2 - SMALL VL - 15 PY - 2019 IS - 33 PG - 6 SN - 1613-6810 DO - 10.1002/smll.201902370 UR - https://m2.mtmt.hu/api/publication/30912453 ID - 30912453 N1 - John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA 02138, United States Kavli Institute, Harvard University, Cambridge, MA 02138, United States Wyss Institute for Biologically Inspired Engineering, Harvard University, Cambridge, MA 02138, United States Cited By :5 Export Date: 27 April 2021 CODEN: SMALB Correspondence Address: Bertoldi, K.; John A. Paulson School of Engineering and Applied Sciences, United States; email: bertoldi@seas.harvard.edu AB - Additive manufacturing with two-photon polymerization (TPP) has opened new opportunities for the rapid fabrication of 3D structures with sub-micrometer resolution, but there are still many fabrication constraints associated with this technique. This study details a postprocessing method utilizing oxygen-plasma etching to increase the capabilities of TPP. Underutilized precision in the typical fabrication process allows this subtractive technique to dramatically reduce the minimum achievable feature size. Moreover, since the postprocessing occurs in a dry environment, high aspect ratio features that cannot survive the typical fabrication route can also be achieved. Finally, it is shown that the technique also provides a pathway to realize structures that otherwise are too delicate to be fabricated with TPP, as it enables to introduce temporary support material that can be removed with the plasma. As such, the proposed approach grants access to a massively expanded design domain, providing new capabilities that are long sought in many fields, including optics, biology, robotics, and solid mechanics. LA - English DB - MTMT ER - TY - JOUR AU - Harris, A. L. AU - Plumadore, A. AU - Smozhanyk, Z. TI - Ionization of hydrogen by electron vortex beam JF - JOURNAL OF PHYSICS B: ATOMIC MOLECULAR AND OPTICAL PHYSICS J2 - J PHYS B AT MOL OPT PH VL - 52 PY - 2019 IS - 9 PG - 15 SN - 0953-4075 DO - 10.1088/1361-6455/ab12f3 UR - https://m2.mtmt.hu/api/publication/30912458 ID - 30912458 N1 - Cited By :6 Export Date: 27 April 2021 CODEN: JPAPE AB - Optical vortex beams have an extensive history in terms of both theory and experiment, but only recently have electron vortex beams been proposed and realized. The possible applications of these matter vortex waves are numerous, but a fundamental understanding of their interactions with atoms and molecules has not yet been developed. In this work, fully differential cross sections for fast (e, 2e) collisions using electron vortex projectiles with small amounts of quantized orbital angular momentum are presented. A comparison is made with the fully differential cross sections using plane wave projectiles and a detailed study of angular momentum transfer is included. Results indicate that ionization by electron vortex beam projectiles is less likely than for plane wave projectiles, and for the special case of aligned collisions, the angular momentum of the incident electron is transferred directly to the ionized electron. LA - English DB - MTMT ER - TY - JOUR AU - Harris, A. L. AU - Saxton, T. A. AU - Temple, Z. G. TI - Recovery time of matter Airy beams using the path integral quantum trajectory model JF - RESULTS IN PHYSICS J2 - RESULTS PHYS VL - 13 PY - 2019 PG - 10 SN - 2211-3797 DO - 10.1016/j.rinp.2019.102253 UR - https://m2.mtmt.hu/api/publication/30912454 ID - 30912454 N1 - Cited By :1 Export Date: 27 April 2021 Correspondence Address: Harris, A.L.; Physics Department, United States; email: alharri@ilstu.edu AB - Following their discovery in the late 1970s, optical Airy beams have found numerous applications in technologies such as microscopy and optical trapping, many of which are based on the wave packets' unique features such as zero or minimal diffraction, self-acceleration, and self-healing. Recent advancements have shown that Airy beams can also be produced using matter waves with many of the same unique characteristics of their optical counterparts. We present here a study of the recovery time of damaged matter Airy wave packets in free space and a nonlinear Kerr-type medium. We show that in free space the recovery time increases approximately linearly with mass and is independent of other kinematical parameters such as momentum, velocity, and spatial width. In the Kerr-type medium, recovery time is decreased compared to free space and does not scale linearly with mass. In order to study matter Airy beams, we introduce the Path Integral Quantum Trajectory model as a new computational tool for the study of non-relativistic, quantum mechanical wave packets and demonstrate its effectiveness in dealing with heavy particle dynamics. LA - English DB - MTMT ER - TY - JOUR AU - Koksal, K. AU - Lembessis, Vasileios E. AU - Yuan, J. AU - Babiker, M. TI - Interference of axially-shifted Laguerre-Gaussian beams and their interaction with atoms JF - JOURNAL OF OPTICS J2 - J OPTICS-UK VL - 21 PY - 2019 IS - 10 PG - 8 SN - 2040-8978 DO - 10.1088/2040-8986/ab411f UR - https://m2.mtmt.hu/api/publication/30912452 ID - 30912452 N1 - Department of Physics, Bitlis Eren University, Bitlis, 13000, Turkey Quantum Technology Group, Department of Physics and Astronomy, College of Science, King Saud University, PO Box 2455, Riyadh, 11451, Saudi Arabia Department of Physics, University of York, Heslington York, YO10 5DD, United Kingdom Cited By :3 Export Date: 27 April 2021 AB - Counter-propagating co-axial Laguene-Gaussian (LG) beams are considered, not in the familiar scenario where the focal planes coincide at z = 0, but when they are separated by a finite axial distance d. The simplest case is where both beams are doughnut beams which have the same linear polarisation. The total fields of this system are shown to display novel amplitude and phase distributions and are shown to give rise to a ring or a finite ring lattice composed of double rings and single central ring. When the beams have slightly different frequencies the ring lattice pattern becomes a finite set of rotating Ferris wheels and the whole pattern also moves axially between the focal planes. We show that the fields of such an axially shifted pair of counter-propagating LG beams generate trapping potentials due to the dipole force which can trap two-level atoms in the components of the ring lattice. We also highlight a unique feature of this system which involves the creation of a new longitudinal optical atom trapping potential due to the scattering force which arises solely when d not equal 0. The results are illustrated using realistic parameters which also confirm the importance of the Gouy and curvature effects in determining the ring separation both radially and axially and gives rise to the possibility of atom tunnelling between components of the double rings. LA - English DB - MTMT ER - TY - JOUR AU - Liang, Guo AU - Wang, Qing TI - Power steered modes conversions and rotations in nonlocal nonlinear media JF - JOURNAL OF OPTICS J2 - J OPTICS-UK VL - 21 PY - 2019 IS - 12 PG - 8 SN - 2040-8978 DO - 10.1088/2040-8986/ab5611 UR - https://m2.mtmt.hu/api/publication/31567897 ID - 31567897 N1 - Export Date: 27 April 2021 Correspondence Address: Liang, G.; School of Physics and Electrical Information, Shangqiu, China; email: liangguo0916@163.com AB - Propagations of optical beams in nonlocal nonlinear media can be described by the nonlocal nonlinear Schrdinger equation (NNLSE). Hermite?Gaussian (HG) modes and Laguerre?Gaussian (LG) modes are two different sets of eigenmodes to the NNLSE. The inter-conversions can be achieved between the HG and the LG modes if they both carry a kind of cross phase. During the modes conversion processes, mode rotations appear. Furthermore, both the inter-conversions and the rotations between the two modes can be controlled exactly by the input optical power. These power induced mode conversions and rotations are discussed in the nematic liquid crystal as an exemplary nonlocal nonlinear media. The theoretical results provide potential applications in the beam shaping in optics. LA - English DB - MTMT ER - TY - JOUR AU - Liang, Guo TI - Revolving and spinning of optical patterns by two coaxial spiraling elliptic beams in nonlocal nonlinear media JF - OPTICS EXPRESS J2 - OPT EXPRESS VL - 27 PY - 2019 IS - 10 SP - 14667 EP - 14674 PG - 8 SN - 1094-4087 DO - 10.1364/OE.27.014667 UR - https://m2.mtmt.hu/api/publication/30912456 ID - 30912456 N1 - Cited By :7 Export Date: 27 April 2021 Correspondence Address: Liang, G.; School of Physics and Electrical Information, China; email: liangguo0916@163.com AB - Rotating patterns can be produced by two coaxial spiraling elliptic beams nonlocal nonlinear media. The two constituent beams carry the orbital angular momentum (OAM), which has the same or opposite signs. The resultant patterns exhibit revolving and spinning rotations similar to the Sun-Earth system. The revolving-typed rotation comes of the overall OAM, while the spinning-typed rotation results from the respective OAM of the constituent beam. A kind of soliton patterns can stably exist, for which a vortex is nested centrally in the rotating square-shaped optical envelope and four peaks appear at four corners. The centrally nested vortex splits into two single vortex for r not equal 1, with r being the power ratio between the two constituent beams. The two single vortexes align vertically for r < 1 and horizontally for r > 1, and their spacing increases with vertical bar r - 1 vertical bar. The theoretical results give a possibility of the transforming from cross-phase-typed OAM into the helical-phase-typed OAM, which may find potential applications in beam shaping and controlling. In addition, the square optical envelope may exhibit advantages in the integration of optical components. (C) 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement LA - English DB - MTMT ER - TY - JOUR AU - Naderi, Arman AU - Bhattacharjee, Nirveek AU - Folch, Albert TI - Digital Manufacturing for Microfluidics JF - ANNUAL REVIEW OF BIOMEDICAL ENGINEERING J2 - ANNU REV BIOMED ENG VL - 21 PY - 2019 SP - 325 EP - 364 PG - 40 SN - 1523-9829 DO - 10.1146/annurev-bioeng-092618-020341 UR - https://m2.mtmt.hu/api/publication/30907072 ID - 30907072 N1 - Cited By :16 Export Date: 27 April 2021 CODEN: ARBEF AB - The microfluidics field is at a critical crossroads. The vast majority of microfluidic devices are presently manufactured using micromolding processes that work very well for a reduced set of biocompatible materials, but the time, cost, and design constraints of micromolding hinder the commercialization of many devices. As a result, the dissemination of microfluidic technology-and its impact on society-is in jeopardy. Digital manufacturing (DM) refers to a family of computer-centered processes that integrate digital three-dimensional (3D) designs, automated (additive or subtractive) fabrication, and device testing in order to increase fabrication efficiency. Importantly, DM enables the inexpensive realization of 3D designs that are impossible or very difficult to mold. The adoption of DM by microfluidic engineers has been slow, likely due to concerns over the resolution of the printers and the biocompatibility of the resins. In this article, we review and discuss the various printer types, resolution, biocompatibility issues, DM microfluidic designs, and the bright future ahead for this promising, fertile field. LA - English DB - MTMT ER - TY - JOUR AU - Ortiz-Rivero, Elisa AU - Prorok, Katarzyna AU - Skowicki, Michal AU - Lu, Dasheng AU - Bednarkiewicz, Artur AU - Jaque, Daniel AU - Haro-Gonzalez, Patricia TI - Single-Cell Biodetection by Upconverting Microspinners JF - SMALL J2 - SMALL PY - 2019 PG - 9 SN - 1613-6810 DO - 10.1002/smll.201904154 UR - https://m2.mtmt.hu/api/publication/30912451 ID - 30912451 N1 - Fluorescence Imaging Group, Departamento de Física de Materiales, Facultad de Ciencias, Universidad Autónoma de Madrid, Madrid, 28049, Spain Institute of Low Temperature and Structure Research, Polish Academy of Sciences, ul.Okolna 2, Wroclaw, 50–422, Poland Łukasiewicz Research Network – Port Polish Center for Technology Development, ul.Stablowicka 147, Wrocław, 54–066, Poland Nanobiology Group, Instituto Ramón y Cajal de Investigación, Sanitaria Hospital Ramón y Cajal, Ctra.De Colmenar Viejo, Km. 9100, Madrid, 28034, Spain Cited By :8 Export Date: 27 April 2021 CODEN: SMALB Correspondence Address: Bednarkiewicz, A.; Institute of Low Temperature and Structure Research, ul.Okolna 2, Poland; email: a.bednarkiewicz@intibs.pl AB - Near-infrared-light-mediated optical tweezing of individual upconverting particles has enabled all-optical single-cell studies, such as intracellular thermal sensing and minimally invasive cytoplasm investigations. Furthermore, the intrinsic optical birefringence of upconverting particles renders them light-driven luminescent spinners with a yet unexplored potential in biomedicine. In this work, the use of upconverting spinners is showcased for the accurate and specific detection of single-cell and single-bacteria attachment events, through real-time monitoring of the spinners rotation velocity of the spinner. The physical mechanisms linking single-attachment to the angular deceleration of upconverting spinners are discussed in detail. Concomitantly, the upconversion emission generated by the spinner is harnessed for simultaneous thermal sensing and thermal control during the attachment event. Results here included demonstrate the potential of upconverting particles for the development of fast, high-sensitivity, and cost-effective systems for single-cell biodetection. LA - English DB - MTMT ER - TY - JOUR AU - Peng, Jiang AU - Ye, Kaiqi AU - Liu, Cheng AU - Sun, Jingbo AU - Lu, Ran TI - The photomechanic effects of the molecular crystals based on 5-chloro-2-(naphthalenylvinyl)benzoxazols fueled by topo-photochemical reactions JF - JOURNAL OF MATERIALS CHEMISTRY C J2 - J MATER CHEM C VL - 7 PY - 2019 IS - 18 SP - 5433 EP - 5441 PG - 9 SN - 2050-7526 DO - 10.1039/c9tc01084j UR - https://m2.mtmt.hu/api/publication/30912455 ID - 30912455 N1 - Cited By :8 Export Date: 27 April 2021 CODEN: JMCCC Correspondence Address: Lu, R.; Sate Key Laboratory of Supramolecular Structure and Materials, China; email: luran@mail.jlu.edu.cn AB - The photo-reactive 5-chloro-2-(naphthalenylvinyl)benzo[d]oxazols (BOV1N, BOV1NF, BOV1NM, BOV2N, and BOV2NM) have been prepared. Interestingly, their molecular crystals exhibit significant photomechanic effects and the H-1 NMR spectral changes for the microcrystals before and after UV irradiation suggest that photodimerization is the driving force for the light-induced macroscopic mechanic movements. The needle-like crystals of BOV1N bend away from the UV light upon irradiation for several seconds. Such rapid elastic deformation could be repeated several times. It should be noted that -type and -type cyclobutane derivatives D-BOV1N (the dimer of BOV1N) are afforded as the main product and byproduct, respectively, after the microcrystals were exposed to 365 nm light for 5 min. Since the photo-induced [2+2] cycloaddition shortens the distance of the olefin pairs and makes the terminal units stretch outside the molecular long axle, the strain in the phototropic surface of the crystal can be yielded and accumulated. The release of the accumulated strain leads to the bending of the needle-like crystals backwards to the UV light. Thus, it was reasonable that the thinner fibers exhibited more rapid and significant movements on account of the high topo-photochemical reaction efficiency. The molecular crystals of BOV1NF, BOV2N, and BOV2NM exhibited similar photomechanic effects. We also found that the UV irradiation parallel to the long axis of crystals would not drive the crystals to move. On the contrary, the light-induced slipping and swinging of the needle-like crystal of BOV1NM is observed due to the low dimerization efficiency. Thus, the molecular crystals based on the naphthylvinylbenzoxazole derivatives become new platforms for the efficient light-mechanical energy conversion. LA - English DB - MTMT ER - TY - JOUR AU - Shen, Mingren AU - Liu, Rui AU - Chen, Ke AU - Yang, Mingcheng TI - Diffusive-Flux-Driven Microturbines by Fore-and-Aft Asymmetric Phoresis JF - PHYSICAL REVIEW APPLIED J2 - PHYS REV APPL VL - 12 PY - 2019 IS - 3 PG - 8 SN - 2331-7019 DO - 10.1103/PhysRevApplied.12.034051 UR - https://m2.mtmt.hu/api/publication/30908265 ID - 30908265 AB - A turbine can convert translational kinetic energy of convective flows into rotation and is one of the most important machines to harvest energy from nature. Here, we propose a theoretical prototype of a micro-turbine that is powered purely by an external diffusive heat or mass flux. The turbine rotates perpendicular to the external thermal or chemical gradient due to fore-and-aft asymmetric thermophoresis or diffusiophoresis. Thus, its performance does not need alignment. The prototype turbine is validated by means of computer simulations. The results show that the angular velocity of the turbine sensitively depends on its structure and interactions with the solvent. This perpendicular-axis phoretic turbine provides large flexibility and the possibility to exploit existing thermal or chemical energies at small scales. LA - English DB - MTMT ER - TY - JOUR AU - Shi, Y. AU - Xu, B. AU - Wu, D. AU - Xiao, Y. AU - Hu, Y. AU - Yao, C. TI - Research Progress on Fabrication of Functional Microfluidic Chips Using Femtosecond Laser Direct Writing Technology JF - ZHONGGUO JIGUANG/CHINESE JOURNAL OF LASERS J2 - ZHONGGUO JIGUANG/CHINESE JOURNAL OF LASERS VL - 46 PY - 2019 IS - 10 SN - 0258-7025 DO - 10.3788/CJL201946.1000001 UR - https://m2.mtmt.hu/api/publication/31156830 ID - 31156830 N1 - School of Engineering Science, University of Science and Technology of China, Hefei, Anhui 230026, China School of Chemistry and Chemical Engineering, Hefei Normal University, Hefei, Anhui 230601, China School of Mechanical Engineering, Nantong Vocational University, Nantong, Jiangsu 226007, China Cited By :1 Export Date: 4 February 2020 CODEN: ZHJID Correspondence Address: Xu, B.; School of Engineering Science, University of Science and Technology of ChinaChina; email: Xb022@mail.ustc.edu.cn School of Engineering Science, University of Science and Technology of China, Hefei, Anhui 230026, China School of Chemistry and Chemical Engineering, Hefei Normal University, Hefei, Anhui 230601, China School of Mechanical Engineering, Nantong Vocational University, Nantong, Jiangsu 226007, China Cited By :13 Export Date: 27 April 2021 CODEN: ZHJID Correspondence Address: Xu, B.; School of Engineering Science, China; email: Xb022@mail.ustc.edu.cn AB - Femtosecond laser direct writing technology has been extensively used for the preparation of functional microfluidic chips because of ultrashort pulse duration and extremely high peak intensity of femtosecond lasers. This study summarizes the following three research directions based on the direct writing technology of femtosecond lasers for microfluidic chips: the integration technology of functional devices fabricated by femtosecond lasers in microfluidic chips with different materials, the multi-functional applications of microfluidic chips integrated by femtosecond lasers, and the rapid processing of microfluidic chips using femtosecond lasers. Furthermore, according to the summaries on the research results of femtosecond laser direct writing technology in the field of microfluidics, this study provides a reference for the research, application, and future development of the microfluidic chips prepared using femtosecond laser direct writing technology. © 2019, Chinese Lasers Press. All right reserved. LA - Chinese DB - MTMT ER - TY - JOUR AU - Xie, Shangran AU - Pennetta, Riccardo AU - Wang, Zheqi AU - Russell, Philip St J. TI - Sustained Self-Starting Orbital Motion of a Glass-Fiber "Nanoengine" Driven by Photophoretic Forces JF - ACS PHOTONICS J2 - ACS PHOTONICS VL - 6 PY - 2019 IS - 12 SP - 3315 EP - 3320 PG - 11 SN - 2330-4022 DO - 10.1021/acsphotonics.9b01433 UR - https://m2.mtmt.hu/api/publication/31567898 ID - 31567898 N1 - Max Planck Institute for the Science of Light, Friedrich-Alexander University, Staudtstr. 2, Erlangen, 91058, Germany Department of Physics, Friedrich-Alexander University, Staudtstr. 2, Erlangen, 91058, Germany Cited By :2 Export Date: 27 April 2021 Correspondence Address: Xie, S.; Max Planck Institute for the Science of Light, Staudtstr. 2, Germany; email: shangran.xie@mpl.mpg.de AB - Controllable optically driven rotation of microscopic objects is desirable in many applications, but is difficult to achieve. Here we report a sustained self-starting orbital motion of a clamped elongated nanostructure, a glass-fiber nanospike, when a CW laser beam is focused axially onto its tip. Analysis shows that photophoretic antitrapping forces, acting on the nanospike with a delayed response, introduce optomechanical gain into the mechanical motion, overcoming the intrinsic mechanical dissipation and resulting in growth from noise of oscillations at the resonant frequency of the nanospike. These photophoretic forces further enable phase-locking of the orthogonal fast and slow vibrations of the nanospike (induced by slight mechanical anisotropy), giving rise to a self-sustained orbital motion. The locked phase of orbital motion can be changed by tuning the gas pressure and adjusting the geometrical asymmetry of the system. This light-driven nanoengine opens up a new degree of freedom for controlling the rotational motion of elongated nano-objects. LA - English DB - MTMT ER - TY - JOUR AU - Zheng, Chaoqun AU - Shen, Yang AU - Liu, Mingkai AU - Liu, Wenjie AU - Wu, Shaoying AU - Jin, Chongjun TI - Layer-by-Layer Assembly of Three Dimensional Optical Functional Nanostructures JF - ACS NANO J2 - ACS NANO VL - 13 PY - 2019 IS - 5 SP - 5583 EP - 5590 PG - 8 SN - 1936-0851 DO - 10.1021/acsnano.9b00549 UR - https://m2.mtmt.hu/api/publication/30912457 ID - 30912457 N1 - State Key Laboratory of Optoelectronic Materials and Technologies, School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou, 510275, China School of Electronics and Information Technology, Sun Yat-sen University, Guangzhou, 510275, China Nonlinear Physics Centre, Research School of Physics and Engineering, Australian National University, Canberra, ACT 2601, Australia Cited By :11 Export Date: 27 April 2021 Correspondence Address: Jin, C.; State Key Laboratory of Optoelectronic Materials and Technologies, China; email: jinchjun@mail.sysu.edu.cn AB - Nanotransfer printing (nTP) technology can generate highly functional three-dimensional (3D) nano structures in a low-cost and high-throughput fashion. Nevertheless, the fabrication yield and quality of the transferred nanostructures are often limited by the merging of the surface patterns of replica stamps during transfer printing. Here, an nTP technology was developed to fabricate large-area and crack-free 3D multilayer nanostructures. Instead of directly depositing materials on the patterned flexible stamp in conventional nTPs, we transferred the nanostructures straightforwardly onto an attached polydimethylsiloxane slab by removing a sacrificial water-soluble poly(acrylic acid) film, which can avoid the cracking of metal film and the failures of printing nanostructures 500 rim onto target substrates. Based on this approach, subwavelength-thick polarization rotators working at infrared wavelengths were fabricated. Excellent performance of linear polarization rotation over a broadband was realized. This nTP approach could complement existing fabrication techniques and benefit the development of various functional nanostructures with complex multilayer hierarchies. LA - English DB - MTMT ER - TY - JOUR AU - Bradac, C TI - Nanoscale Optical Trapping: A Review JF - ADVANCED OPTICAL MATERIALS J2 - ADV OPT MATER VL - 6 PY - 2018 IS - 12 PG - 26 SN - 2195-1071 DO - 10.1002/adom.201800005 UR - https://m2.mtmt.hu/api/publication/31398687 ID - 31398687 LA - English DB - MTMT ER - TY - JOUR AU - Cagliero, Andrea TI - Circularly symmetric light waves: an overview JF - JOURNAL OF OPTICS J2 - J OPTICS-UK VL - 20 PY - 2018 IS - 8 PG - 20 SN - 2040-8978 DO - 10.1088/2040-8986/aad113 UR - https://m2.mtmt.hu/api/publication/27524213 ID - 27524213 N1 - Cited By :1 Export Date: 27 April 2021 Correspondence Address: Cagliero, A.; Microwaves Department of IMT Atlantique, France; email: andrea.cagliero@imt-atlantique.fr LA - English DB - MTMT ER - TY - JOUR AU - Engay, Einstom AU - Bunea, Ada-Ioana AU - Chouliara, Manto AU - Banas, Andrew AU - Gluckstad, Jesper TI - Natural convection induced by an optically fabricated and actuated microtool with a thermoplasmonic disk JF - OPTICS LETTERS J2 - OPT LETT VL - 43 PY - 2018 IS - 16 SP - 3870 EP - 3873 PG - 4 SN - 0146-9592 DO - 10.1364/OL.43.003870 UR - https://m2.mtmt.hu/api/publication/30512786 ID - 30512786 N1 - Cited By :8 Export Date: 27 April 2021 CODEN: OPLED AB - Two-photon polymerization was employed for fabricating microtools amenable to optical trapping and manipulation. A disk feature was included as part of the microtools and further functionalized by electron-beam deposition. The nanostructured gold layer on the disk facilitates off-resonant plasmonic heating upon illumination with a laser beam. As a consequence, natural convection characterized by the typical toroidal shape resembling that of Rayleigh-Benard flow can be observed. A velocity of several mu m . s(-1) is measured for 2 mu m microspheres dispersed in the surroundings of the microtool. To the best of our knowledge, this is the first time that thermoplasmonic-induced natural convection is experimentally demonstrated using a mobile heat source. (C) 2018 Optical Society of America LA - English DB - MTMT ER - TY - CHAP AU - Gurvitz, E.A. AU - Shalin, A.S. TI - Numerical calculation and Cartesian multipole decomposition of optical pulling force acting on Si nanocube in visible region VL - 1092 PB - Institute of Physics Publishing T3 - Journal of Physics: Conference Series, ISSN 1742-6588 ; 1092. PY - 2018 DO - 10.1088/1742-6596/1092/1/012048 UR - https://m2.mtmt.hu/api/publication/31989299 ID - 31989299 N1 - Cited By :2 Export Date: 27 April 2021 Correspondence Address: Gurvitz, E.A.; ITMO University, 49 Kronverkskiy prospect, Russian Federation; email: egorgurvitz@gmail.com AB - The multipole decomposition of optical force and scattering cross-section is considered for the two plane waves incident on Si nanocube. The obtained results show the high impact of a toroidal moment and high order multipoles in optical force, while they aren't represented main resonances in scattering cross-section. © 2018 Institute of Physics Publishing.All Rights Reserved. LA - English DB - MTMT ER - TY - JOUR AU - Huang, Kun AU - Liu, Hong AU - Restuccia, Sara AU - Mehmood, Muhammad Q AU - Mei, Sheng-Tao AU - Giovannini, Daniel AU - Danner, Aaron AU - Padgett, Miles J AU - Teng, Jing-Hua AU - Qiu, Cheng-Wei TI - Spiniform phase-encoded metagratings entangling arbitrary rational-order orbital angular momentum JF - LIGHT-SCIENCE & APPLICATIONS J2 - LIGHT-SCI APPL VL - 7 PY - 2018 PG - 7 SN - 2095-5545 DO - 10.1038/lsa.2017.156 UR - https://m2.mtmt.hu/api/publication/27524216 ID - 27524216 N1 - Department of Electrical and Computer Engineering, National University of Singapore, Singapore, 117583, Singapore Institute of Materials Research and Engineering, Agency for Science, Technology and Research, Singapore, 138634, Singapore Department of Optics and Optical Engineering, University of Science and Technology of China, Hefei, 230026, China SUPA, School of Physics and Astronomy, University of Glasgow, Glasgow, G128QQ, United Kingdom Information Technology University of the Punjab, Lahore, 54000, Pakistan NUS Graduate School for Integrative Science and Engineering, National University of Singapore, Singapore, 117456, Singapore Edward S Rogers Department of Electrical and Computer Engineering, University of Toronto, Toronto, M5S 3G4, Canada SZU-NUS Collaborative Innovation Center for Optoelectronic Science and Technology, Shenzhen University, Shenzhen, 518060, China NUS Suzhou Research Institute (NUSRI), Suzhou, 215123, China Cited By :51 Export Date: 27 April 2021 Correspondence Address: Qiu, C.-W.; Department of Electrical and Computer Engineering, Singapore; email: eleqc@nus.edu.sg LA - English DB - MTMT ER - TY - JOUR AU - Li, Manman AU - Yan, Shaohui AU - Liang, Yansheng AU - Zhang, Peng AU - Yao, Baoli TI - Spinning of particles in optical double-vortex beams JF - JOURNAL OF OPTICS J2 - J OPTICS-UK VL - 20 PY - 2018 IS - 2 PG - 8 SN - 2040-8978 DO - 10.1088/2040-8986/aaa0e9 UR - https://m2.mtmt.hu/api/publication/27272287 ID - 27272287 N1 - State Key Laboratory of Transient Optics and Photonics, Xi'An Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an, 710119, China University of Chinese Academy of Sciences, Beijing, 100049, China Cited By :5 Export Date: 27 April 2021 Correspondence Address: Yan, S.; State Key Laboratory of Transient Optics and Photonics, China; email: shaohuiyan@opt.ac.cn LA - English DB - MTMT ER - TY - JOUR AU - Liu, Jing AU - Li, Zhiyuan TI - Controlled Mechanical Motions of Microparticles in Optical Tweezers JF - MICROMACHINES J2 - MICROMACHINES-BASEL VL - 9 PY - 2018 IS - 5 PG - 28 SN - 2072-666X DO - 10.3390/mi9050232 UR - https://m2.mtmt.hu/api/publication/27524257 ID - 27524257 N1 - Cited By :18 Export Date: 27 April 2021 Correspondence Address: Li, Z.; Institute of Laser and Intelligent Manufacturing Technology, China; email: phzyli@scut.edu.cn LA - English DB - MTMT ER - TY - JOUR AU - Poletkin, Kirill V AU - Asadollahbaik, Asa AU - Kampmann, Ronald AU - Korvink, Jan G TI - Levitating Micro-Actuators: A Review JF - ACTUATORS J2 - ACTUATORS VL - 7 PY - 2018 IS - 2 PG - 16 SN - 2076-0825 DO - 10.3390/act7020017 UR - https://m2.mtmt.hu/api/publication/27524255 ID - 27524255 N1 - The Institute of Microstructure Technology, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, Eggenstein-Leopoldshafen, 76344, Germany Voxalytic GmbH, Rosengarten 3, Karlsruhe, 76228, Germany Cited By :7 Export Date: 27 April 2021 Correspondence Address: Poletkin, K.V.; The Institute of Microstructure Technology, Hermann-von-Helmholtz-Platz 1, Germany; email: kirill.poletkin@kit.edu LA - English DB - MTMT ER - TY - JOUR AU - Polimeno, P AU - Magazzù, A AU - Iatì, MA AU - Patti, F AU - Saija, R AU - Esposti, Boschi CD AU - Donato, MG AU - Gucciardi, PG AU - Jones, PH AU - Volpe, G AU - Maragò, OM TI - Optical tweezers and their applications JF - JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER J2 - J QUANT SPECTROSC RA VL - 218 PY - 2018 SP - 131 EP - 150 PG - 20 SN - 0022-4073 DO - 10.1016/j.jqsrt.2018.07.013 UR - https://m2.mtmt.hu/api/publication/27629469 ID - 27629469 N1 - CNR-IPCF, Istituto per i Processi Chimico-Fisici, Viale F. Stagno d'Alcontres 37, Messina, I-98158, Italy Institutionen för Fysik, Göteborgs Universitet, Origovägen 6 B, Göteborg, I-41296, Sweden Dipartimento di Scienze Matematiche e Informatiche, Scienze Fisiche e Scienze della Terra, Università di Messina, Viale F. Stagno d'Alcontres, 31, Messina, I-98166, Italy CNR-IMM sezione di Bologna, Istituto per la Microelettronica e Microsistemi, Via P. Gobetti 101, Bologna, I-40129, Italy Department of Physics and Astronomy, University College London, Gower Street, London, WC1E 6BT, United Kingdom Cited By :59 Export Date: 27 April 2021 Correspondence Address: Iatì, M.A.; CNR-IPCF, Viale F. Stagno d'Alcontres 37, Italy; email: mariaantonia.iati@cnr.it LA - English DB - MTMT ER - TY - JOUR AU - Shi, Peng AU - Du, Luping AU - Yuan, Xiaocong TI - Structured spin angular momentum in highly focused cylindrical vector vortex beams for optical manipulation JF - OPTICS EXPRESS J2 - OPT EXPRESS VL - 26 PY - 2018 IS - 18 SP - 23449 EP - 23459 PG - 11 SN - 1094-4087 DO - 10.1364/OE.26.023449 UR - https://m2.mtmt.hu/api/publication/30512785 ID - 30512785 N1 - Cited By :28 Export Date: 27 April 2021 Correspondence Address: Yuan, X.; Nanophotonics Research Centre, China; email: xcyuan@szu.edu.cn AB - We investigate the spin properties of a family of cylindrical vector vortex beams under a focusing condition. The spin-orbit interaction is demonstrated by comparing the energy flow and spin flow density of the focused field to those of the incident field. This spin-orbit interaction is analyzed to construct the desired distribution of spin angular momentum for optical manipulation. The structured spin angular momentum of the focused field can transfer to the optical torque for the non-magnetic absorptive particle. The influences of polarization topological charge, vortex topological charge and wavelength on optical torque in the hot-spot of focused field are summarized for three typical particles. Such results may be exploited in practical optical manipulation, particularly for optically induced rotations. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement LA - English DB - MTMT ER - TY - JOUR AU - Stahl, C. S. D. AU - Gbur, G. TI - Twisted vortex Gaussian Schell-model beams JF - JOURNAL OF THE OPTICAL SOCIETY OF AMERICA A: OPTICS IMAGE SCIENCE AND VISION J2 - J OPT SOC AM A VL - 35 PY - 2018 IS - 11 SP - 1899 EP - 1906 PG - 8 SN - 1084-7529 DO - 10.1364/JOSAA.35.001899 UR - https://m2.mtmt.hu/api/publication/30512783 ID - 30512783 N1 - Cited By :10 Export Date: 27 April 2021 CODEN: JOAOD Correspondence Address: Gbur, G.; Department of Physics and Optical Science, United States; email: gjgbur@uncc.edu AB - We introduce a new class of partially coherent vortex beams in which the angular momentum of the beam is provided from two different sources: the underlying vortex of the random beam and the "twist" given to the ensemble of beams. The statistical and propagation properties of such beams are investigated, and their orbital angular momentum properties are analyzed. The combination of distinct orbital angular momentum sources allows unusual behaviors that were previously unobserved. (C) 2018 Optical Society of America. LA - English DB - MTMT ER - TY - JOUR AU - Sun, S. AU - Wang, P. TI - Micro/nano structures fabricated by two-photon photopolymerization of femtosecond laser JF - HONGWAI YU JIGUANG GONGCHENG: INFRARED AND LASER ENGINEERING J2 - INFR LAS ENGIN VL - 47 PY - 2018 IS - 12 SN - 1007-2276 DO - 10.3788/IRLA201847.1206009 UR - https://m2.mtmt.hu/api/publication/31989295 ID - 31989295 N1 - Cited By :2 Export Date: 27 April 2021 AB - It is hard to fabricate parts of Micro/Nano-Electro-Mechanical Systems (MEMS/NEMS). To solve this problem, the method of two -photon photopolymerization of femtosecond laser which had subdiffraction -limited spatial resolution was researched. Micro/nano fabrication system of Ti -sapphire femtosecond laser was set up. Process experiments of femtosecond laser two-photon photopolymerization were carried out using the material of liquid polymer. The experimental results indicate that the size of single solidification point reduces and the fabrication resolution improves with the reduction of laser power. The surface roughness value of the fabricated parts decreases, and the fabrication efficiency reduces with the scanning step reducing. 3D micro/nano structures composed of micro walls and nano wires was designed with CAD software and fabricated with two -photon photopolymerization of femtosecond laser. Nano wire whose diameter was smaller than 100 nm was fabricated after optimizing the process parameters. It is verified that two -photon photopolymerization of femtosecond laser provides an efficient method for micro/nano device. © 2018, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved. LA - Chinese DB - MTMT ER - TY - CHAP AU - Tabak, A.F. ED - Segil, Jacob TI - Bioinspired and biomimetic micro-robotics for therapeutic applications T2 - Handbook of Biomechatronics PB - Elsevier CY - Amsterdam SN - 9780128125397 PY - 2018 SP - 457 EP - 523 PG - 67 DO - 10.1016/B978-0-12-812539-7.00010-6 UR - https://m2.mtmt.hu/api/publication/31989301 ID - 31989301 N1 - Cited By :4 Export Date: 27 April 2021 Correspondence Address: Tabak, A.F.; Max-Planck Institute for Intelligent SystemsGermany AB - Swimming micro-robots are envisioned as the definitive therapeutic tools in order to achieve minimal invasive medicine for over 50 years. Micro-robots will be able to reach deep inside the human body as it contains an enormous and intricate network of ducts and vessels filled with liquids. The desired method of propulsion is swimming mimicking natural micro-swimmers, that is, bacteria and spermatozoa. Consequently, several issues emerged due to different physical characteristics of the desired dimensions, immune responses of living organisms, sensing and control while performing deep in tissue, and limitations on the power supply methods to sustain actuation and maneuvering. The latest approach to address all these issues is to employ natural swimmers with computer control to deliver cargo instead resulting in micro cybernetic systems. Furthermore, manufacturing techniques are originally based on microelectromechanical systems manufacturing techniques; but, evolved to include a much wider range of materials and methods hand in hand with biocompatibility. © 2019 Elsevier Inc. All rights reserved. LA - English DB - MTMT ER - TY - JOUR AU - Tang, M-J AU - Wang, W AU - Li, Z-L AU - Liu, Z-M AU - Guo, Z-Y AU - Tian, H-Y AU - Liu, Z AU - Ju, X-J AU - Xie, R AU - Chu, L-Y TI - Controllable Microfluidic Fabrication of Magnetic Hybrid Microswimmers with Hollow Helical Structures JF - INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH J2 - IND ENG CHEM RES VL - 57 PY - 2018 IS - 29 SP - 9430 EP - 9438 PG - 9 SN - 0888-5885 DO - 10.1021/acs.iecr.8b01755 UR - https://m2.mtmt.hu/api/publication/27629407 ID - 27629407 N1 - School of Chemical Engineering, Sichuan University, Chengdu, Sichuan, 610065, China State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, Sichuan, 610065, China Cited By :12 Export Date: 27 April 2021 CODEN: IECRE Correspondence Address: Wang, W.; School of Chemical Engineering, China; email: wangwei512@scu.edu.cn LA - English DB - MTMT ER - TY - CHAP AU - Wan, C. AU - Tang, X. AU - Qin, Y. AU - Xiao, Y. AU - Zhan, Q. TI - Generation of Prescribed Optical Orbital Angular Momentum Spectrum with Spiral Polarization Modulation T2 - CLEO: Applications and Technology 2018 PB - OSA Publishing CY - Washington DC SN - 9781943580422 T3 - Conference on Lasers and Electro-Optics PY - 2018 DO - 10.1364/CLEO_AT.2018.JTh2A.59 UR - https://m2.mtmt.hu/api/publication/31989298 ID - 31989298 N1 - School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan, Hubei, 430074, China Department of Electro-Optics and Photonics, University OfDayton, 300 College Park, Dayton, OH 45469, United States Export Date: 27 April 2021 AB - We report a method to generate prescribed optical orbital angular momentum (OAM) spectrum with spiral polarization modulation. The generated OAM spectrum contains 11 OAM states of equal intensity and various linear polarization angles. © 2018 OSA. LA - English DB - MTMT ER - TY - CHAP AU - Denz, C. AU - Barroso, Peña A. ED - Gluckstad, J ED - Palima, D TI - Controlling autonomous nanobiorobots by optical micromanipulation T2 - Light Robotics PB - Elsevier CY - Amsterdam SN - 9780702070969 PY - 2017 SP - 411 EP - 439 PG - 29 DO - 10.1016/B978-0-7020-7096-9.00014-8 UR - https://m2.mtmt.hu/api/publication/31157161 ID - 31157161 N1 - Export Date: 28 February 2024 Correspondence Address: Denz, C.; Institute of Applied Physics, Germany AB - The exploitation of biomolecular motors as mechanical actuators for the implementation of microsystems and microrobots prospects exciting applications in the field of nanoengineering and biomedicine. Particularly, biomotors that propel swimming cells allow a sophisticated motion via a variety of complex mechanisms. A challenging task for a reasonable utilization of such biological robotic motors in a general and efficient cooperative behavior is to attach, that is, adhere or tether a single or a multitude of individual biological cells to a specific surface or microparticle in a defined way thereby creating autonomous functional robots at the nano- or microscale. In this chapter, we outline the principle and implementation of optical manipulation methods as a general solution to control micropatterning and microassembly of bacterial based nano- and microrobotic devices. We discuss the application of complex light landscapes as three-dimensional traps for achieving full control of a multitude of bacteria featuring a variety of shapes, and we give a comprehensive overview of functional optically assembled biohybrid systems that exploit the unique features of flagellar molecular motors for powering microsystems. © 2017 Elsevier Ltd All rights reserved. LA - English DB - MTMT ER - TY - JOUR AU - Descheemaeker, Lana AU - Ginis, Vincent AU - Viaene, Sophie AU - Tassin, Philippe TI - Optical Force Enhancement Using an Imaginary Vector Potential for Photons JF - PHYSICAL REVIEW LETTERS J2 - PHYS REV LETT VL - 119 PY - 2017 IS - 13 PG - 5 SN - 0031-9007 DO - 10.1103/PhysRevLett.119.137402 UR - https://m2.mtmt.hu/api/publication/26890987 ID - 26890987 N1 - Applied Physics Research Group, Vrije Universiteit Brussel, Pleinlaan 2, Brussel, B-1050, Belgium Harvard John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA 02138, United States Department of Physics, Chalmers University of Technology, Göteborg, SE-412 96, Sweden Cited By :3 Export Date: 27 April 2021 CODEN: PRLTA LA - English DB - MTMT ER - TY - JOUR AU - Emile, Oliveir AU - Brousseau, Christian AU - Emile, Janine AU - Mahdjoubi, Kouroch TI - Energy and angular momentum transfers from an electromagnetic wave to a copper ring in the UHF band JF - COMPTES RENDUS PHYSIQUE J2 - CR PHYS VL - 18 PY - 2017 IS - Rennes SP - 137 EP - 143 PG - 7 SN - 1631-0705 DO - 10.1016/j.crhy.2016.12.003 UR - https://m2.mtmt.hu/api/publication/26536542 ID - 26536542 N1 - Université Rennes-1, Rennes cedex, 35042, France UMR CNRS 6164 IETR, Université Rennes-1, Rennes cedex, 35042, France UMR CNRS 6251 IPR, Université Rennes-1, Rennes cedex, 35042, France Cited By :5 Export Date: 27 April 2021 Correspondence Address: Émile, O.; Université Rennes-1France; email: olivier.emile@univ-rennes1.fr LA - English DB - MTMT ER - TY - CHAP AU - Guo, J. AU - Fan, D. ED - Gluckstad, J ED - Palima, D TI - Electromagnetic wave enabled micro/nanorobotic devices and their applications T2 - Light Robotics PB - Elsevier CY - Amsterdam SN - 9780702070969 PY - 2017 SP - 129 EP - 163 PG - 35 DO - 10.1016/B978-0-7020-7096-9.00005-7 UR - https://m2.mtmt.hu/api/publication/31157356 ID - 31157356 N1 - Export Date: 4 February 2020 Correspondence Address: Guo, J.; Materials Science and Engineering Program, The University of Texas at Austin, TX, United States Export Date: 27 April 2021 Correspondence Address: Guo, J.; Materials Science and Engineering Program, TX, United States AB - In this chapter, we review the concept, design, working mechanisms, and applications of state-of-the-art micro/nanorobotic devices manipulated by electromagnetic waves. Various devices are categorized according to the working mechanisms. Unique characteristics of each type of micro/nano machines are discussed. The development of micro/nanorobotics will enable a myriad of applications in microfluidics, biosensing, diagnosis, drug delivery, and surgery. © 2017 Elsevier Ltd All rights reserved. LA - English DB - MTMT ER - TY - CHAP AU - Kashchuk, A.V. AU - Bui, A.A.M. AU - Zhang, S. AU - Houillot, A. AU - Carberry, D. AU - Stilgoe, A.B. AU - Nieminen, T.A. AU - Rubinsztein-Dunlop, H. ED - Gluckstad, J ED - Palima, D TI - Optically driven rotating micromachines T2 - Light Robotics PB - Elsevier CY - Amsterdam SN - 9780702070969 PY - 2017 SP - 99 EP - 128 PG - 30 DO - 10.1016/B978-0-7020-7096-9.00004-5 UR - https://m2.mtmt.hu/api/publication/31156992 ID - 31156992 N1 - Export Date: 4 February 2020 Correspondence Address: Kashchuk, A.V.; The University of Queensland, St Lucia, QLD, Australia Cited By :1 Export Date: 27 April 2021 Correspondence Address: Kashchuk, A.V.; The University of Queensland, QLD, Australia AB - We review the basic theory and principles of optically driven micromachines, and present a series of simple heuristic principles for designing such micromachines. We discuss the relationship between symmetry and optical torque, and consider techniques to enhance or reduce reflection. Finally, we briefly survey some applications, and present a prototypical optically driven micromachine for use in microfluidic devices. © 2017 Elsevier Ltd All rights reserved. LA - English DB - MTMT ER - TY - JOUR AU - Li, Manman AU - Yan, Shaohui AU - Liang, Yansheng AU - Zhang, Peng AU - Yao, Baoli TI - Transverse spinning of particles in highly focused vector vortex beams JF - PHYSICAL REVIEW A J2 - PHYS REV A VL - 95 PY - 2017 IS - 5 PG - 6 SN - 2469-9926 DO - 10.1103/PhysRevA.95.053802 UR - https://m2.mtmt.hu/api/publication/26714256 ID - 26714256 N1 - State Key Laboratory of Transient Optics and Photonics, Xi'An Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an, 710119, China University of Chinese Academy of Sciences, Beijing, 100049, China Cited By :25 Export Date: 27 April 2021 LA - English DB - MTMT ER - TY - JOUR AU - Lin, Chun-Yu AU - Chang, Hsin-Yu AU - Yeh, Te-Fu AU - Teng, Hsisheng AU - Chen, Shean-Jen TI - Three-dimensional patterned graphene oxide-quantum dot microstructures via two-photon crosslinking JF - OPTICS LETTERS J2 - OPT LETT VL - 42 PY - 2017 IS - 23 SP - 4970 EP - 4973 PG - 4 SN - 0146-9592 DO - 10.1364/OL.42.004970 UR - https://m2.mtmt.hu/api/publication/27049140 ID - 27049140 N1 - Advanced Optoelectronic Technology Center, National Cheng Kung University, Tainan, 70101, Taiwan Department of Chemical Engineering, National Cheng Kung University, Tainan, 70101, Taiwan College of Photonics, National Chiao Tung University, Tainan, 71150, Taiwan Cited By :1 Export Date: 27 April 2021 CODEN: OPLED Correspondence Address: Chen, S.-J.; College of Photonics, Taiwan; email: sheanjen@nctu.edu.tw LA - English DB - MTMT ER - TY - JOUR AU - Liu, Z L AU - Liu, Y X AU - Tang, Y AU - Zhang, N AU - Wu, F P AU - Zhang, B TI - Fabrication and application of a non-contact double-tapered optical fiber tweezers JF - OPTICS EXPRESS J2 - OPT EXPRESS VL - 25 PY - 2017 IS - 19 SP - 22480 EP - 22489 PG - 10 SN - 1094-4087 DO - 10.1364/OE.25.022479 UR - https://m2.mtmt.hu/api/publication/26890988 ID - 26890988 LA - English DB - MTMT ER - TY - JOUR AU - Liu, ZL AU - Liu, YX AU - Tang, Y AU - Zhang, N AU - Wu, FP AU - Zhang, B TI - Fabrication and application of a non-contact double-tapered optical fiber tweezers JF - OPTICS EXPRESS J2 - OPT EXPRESS VL - 25 PY - 2017 IS - 19 SP - 22480 EP - 22489 PG - 10 SN - 1094-4087 DO - 10.1364/OE.25.022480 UR - https://m2.mtmt.hu/api/publication/27629410 ID - 27629410 N1 - Cited By :9 Export Date: 27 April 2021 Correspondence Address: Zhang, B.; Department of Physics, 122 Luoshi Road, China; email: zhangbo2011@whut.edu.cn LA - English DB - MTMT ER - TY - JOUR AU - Lloyd, S M AU - Babiker, M AU - Thirunavukkarasu, G AU - Yuan, J TI - Electron vortices: Beams with orbital angular momentum JF - REVIEWS OF MODERN PHYSICS J2 - REV MOD PHYS VL - 89 PY - 2017 IS - 3 PG - 44 SN - 0034-6861 DO - 10.1103/RevModPhys.89.035004 UR - https://m2.mtmt.hu/api/publication/26934209 ID - 26934209 N1 - Cited By :92 Export Date: 27 April 2021 LA - English DB - MTMT ER - TY - CHAP AU - López, PAH AU - Reyes, ZPQ AU - Guzmán, ÁM AU - Torres, YM AU - Mendoza, JHC ED - Dholakia, K ED - Spalding, GC TI - Diffracted optical vortices by an angular aperture T2 - Optical Trapping and Optical Micromanipulation XIV PB - SPIE CY - Bellingham (WA) SN - 9781510611528 T3 - Proceedings of SPIE, ISSN 0277-786X ; 10347. PB - SPIE PY - 2017 DO - 10.1117/12.2274017 UR - https://m2.mtmt.hu/api/publication/27629411 ID - 27629411 N1 - GOTS, Optics and Signal Processing Group, Physics School, Universidad Industrial de Santander, Bucaramanga, 680003, Colombia Physics Department, Universidad Nacional de Colombia, Bogotá, 11001000, Colombia Export Date: 27 April 2021 CODEN: PSISD LA - English DB - MTMT ER - TY - CHAP AU - Maruo, S ED - Knopf, George K. ED - Otani, Yukitoshi TI - Optically driven microfluidic devices produced by multiphoton microfabrication T2 - Optical Nano and Micro Actuator Technology PB - CRC Press CY - Boca Raton, Florida SN - 9781439840542 PB - CRC Press PY - 2017 SP - 307 EP - 332 PG - 26 DO - 10.1201/b13892 UR - https://m2.mtmt.hu/api/publication/27629408 ID - 27629408 LA - English DB - MTMT ER - TY - JOUR AU - Poocza, Leander AU - Gottschaldt, Michael AU - Markweg, Eric AU - Hauptmann, Nicole AU - Hildebrand, Gerhard AU - Pretzel, David AU - Hartlieb, Matthias AU - Reichardt, Christian AU - Kuebel, Joachim AU - Schubert, Ulrich S AU - Mollenhauer, Olaf AU - Dietzek, Benjamin AU - Liefeith, Klaus TI - Optimized Photoinitiator for Fast Two-Photon Absorption Polymerization of Polyester-Macromers for Tissue Engineering JF - ADVANCED ENGINEERING MATERIALS J2 - ADV ENG MATER VL - 19 PY - 2017 IS - 3 PG - 12 SN - 1438-1656 DO - 10.1002/adem.201600686 UR - https://m2.mtmt.hu/api/publication/26536540 ID - 26536540 N1 - Institute for Bioprocessing and Analytical Measurement Techniques e.V, Rosenhof, Heilbad Heiligenstadt, 37308, Germany University of Valladolid, Paseo de Belén 19, Valladolid, 47011, Spain Laboratory of Organic and Macromolecular Chemistry, Friedrich Schiller University Jena, Humboldtstrasse 10, Jena, 07745, Germany Jena Center for Soft Matter, Friedrich Schiller University Jena, Philosophenweg 7, Jena, 07735, Germany TETRA Society for Sensoric, Robotics and Automation mbH, Am Wald 4, Ilmenau, 98693, Germany Institute of Physical Chemistry and Abbe Center of Photonics, Friedrich Schiller University Jena, Albert- Einstein-Strasse 9, Jena, 07743, Germany Leibniz Institute of Photonic Technology, Albert-Einstein-Straße 9, Jena, 07743, Germany Cited By :9 Export Date: 27 April 2021 Correspondence Address: Liefeith, K.; Institute for Bioprocessing and Analytical Measurement Techniques e.V, Germany; email: Klaus.Liefeith@iba-heiligenstadt.de LA - English DB - MTMT ER - TY - CHAP AU - Rubinsztein-Dunlop, H AU - Asavei, T AU - Stilgoe, AB AU - Loke, VLY AU - Vogel, R AU - Nieminen, TA AU - Heckenberg, NR ED - Knopf, George K. ED - Otani, Yukitoshi TI - Design of optically driven microrotors T2 - Optical Nano and Micro Actuator Technology PB - CRC Press CY - Boca Raton, Florida SN - 9781439840542 PB - CRC Press PY - 2017 SP - 277 EP - 306 PG - 30 DO - 10.1201/b13892 UR - https://m2.mtmt.hu/api/publication/27629476 ID - 27629476 N1 - School of Physical Sciences, Centre for Biophotonics and Laser Science, University of Queensland, Brisbane, QLD, Australia School of Mathematics and Physics, The University of Queensland, Brisbane, QLD, Australia Cited By :2 Export Date: 27 April 2021 LA - English DB - MTMT ER - TY - JOUR AU - Safdar, M AU - Simmchen, J AU - Janis, J TI - Light-driven micro-and nanomotors for environmental remediation JF - ENVIRONMENTAL SCIENCE-NANO J2 - ENVIRON SCI-NANO VL - 4 PY - 2017 IS - 8 SP - 1602 EP - 1616 PG - 15 SN - 2051-8153 DO - 10.1039/c7en00367f UR - https://m2.mtmt.hu/api/publication/26891214 ID - 26891214 N1 - Department of Chemistry, University of Eastern Finland, FI-80101 Joensuu, Finland Department of Physical Chemistry, Technical University of Dresden, Dresden, 01069, Germany Cited By :102 Export Date: 28 February 2024 LA - English DB - MTMT ER -