@article{MTMT:33851537,
	title = {Design of experiments optimization of fluorine-doped tin oxide films prepared by spray pyrolysis for photovoltaic applications},
	url = {https://m2.mtmt.hu/api/publication/33851537},
	author = {Pinheiro, X. L. and Vilanova, A. and Mesquita, D. and Monteiro, M. and Eriksson, J. A. M. and Barbosa, J. R. S. and Matos, C. and Oliveira, A. J. N. and Oliveira, K. and Capitao, J. and Loureiro, E. and Fernandes, P. A. and Mendes, A. and Salome, P. M. P.},
	doi = {10.1016/j.ceramint.2022.12.175},
	journal-iso = {CERAM INT},
	journal = {CERAMICS INTERNATIONAL},
	volume = {49},
	unique-id = {33851537},
	issn = {0272-8842},
	abstract = {Transparent conducting oxides (TCOs) have witnessed an ever-expanding use in our lives through many opto-electronic applications, namely photovoltaic (PV) devices. Indium-tin oxide (ITO) is the most used and studied TCO, but it lacks thermal and chemical stability and indium is a scarce and toxic element. Fluorine-doped tin oxide (FTO) emerged as the most promising alternative to ITO, presenting better thermal and chemical stability. Among the numerous techniques for depositing FTO thin films over glass substrates, spray pyrolysis is the simplest and most economical, with great potential for upscaling. However, the relative importance of the experimental variables that influence the optoelectronic properties remains barely addressed. Following this premise, the present work aimed at optimizing the deposition of FTO films on soda lime glass (SLG) substrates by spray pyrolysis following a Design of Experiments (DoE) methodology. The optoelectronic properties of FTO-SLG substrates was evaluated based on their optical transmittance and sheet resistance, both combined in a figure of merit (FoM) tailored for PV applications. It was concluded that the volume of sprayed solution and the fluorine/ tin ratio in the precursor have the greatest influence in the FoM, being the optimal deposition conditions a sprayed volume of 60.8 ml and a [F]/[Sn] ratio of 0.45. FTO-SLG substrates prepared with these conditions achieved a FoM of 0.680 Omega(-1/10)(square), corresponding to a sheet resistance of 3.40 Omega(square) and a transmittance equivalent to 77% of the maximum current generated in the considered spectrum. The improved FoM was validated in dyesensitized and perovskite solar cells (DSSCs and PSCs, respectively), assembled with in-house optimized and commercial substrates. The efficiency of DSSCs was improved by 8.9% (relative), whereas PSCs achieved a lightto-power efficiency of 17% (absolute), corresponding to an improvement of 4.7% (relative).},
	keywords = {spray pyrolysis; design of experiments (DoE); Fluorine-doped tin oxide (FTO); dye sensitized solar cells (DSSC); Perovskite solar cells (PSC)},
	year = {2023},
	eissn = {1873-3956},
	pages = {13019-13030}
}

@article{MTMT:31436708,
	title = {Facile Synthesis of Binder-Free Three-Dimensional CuxS Nanoflowers for Lithium Batteries},
	url = {https://m2.mtmt.hu/api/publication/31436708},
	author = {Adylkhanova, Assyl and Nurpeissova, Arailym and Adair, Desmond and Bakenov, Zhumabay and Taniguchi, Izumi and Kalimuldina, Gulnur},
	doi = {10.3389/fenrg.2020.00154},
	journal-iso = {FRONT ENERGY RES},
	journal = {FRONTIERS IN ENERGY RESEARCH},
	volume = {8},
	unique-id = {31436708},
	issn = {2296-598X},
	abstract = {Copper sulfides (CuxS) with different stoichiometry are considered as prospective cathode materials for lithium batteries owing to their large energy storage capability. In this work, three-dimensional CuxS cathodes were synthesized via introducing commercially available copper foam into the solution of dimethyl sulfoxide (DMSO) and sulfur powder. The synthesis procedures were straightforward and ultrafast and did not require additional reagents, high temperature, or long processing time and can be considered as a facile one-step method. Copper sulfide materials with different stoichiometry (x= 1.8, 1.96) were obtained by changing the temperature and the residence time of the copper foam in the DMSO solution. The effects of the temperature and time on phase and morphology of CuxS were characterized by X-ray diffraction and scanning electron microscopy coupled with energy dispersive X-ray spectroscopy. Electrochemical tests resulted in a stable cyclability of Cu-1.S-8 cathode with 100% Coulombic efficiency and capacity of approximately 250 mAh g(-1).},
	keywords = {sulfur; Copper sulfide; LITHIUM-ION BATTERIES; copper foam; one-step method},
	year = {2020},
	eissn = {2296-598X}
}

@article{MTMT:26564021,
	title = {Ultrasonic Spray Pyrolysis Deposited Copper Sulphide Thin Films for Solar Cell Applications},
	url = {https://m2.mtmt.hu/api/publication/26564021},
	author = {Firat, Y E and Yildirim, H and Erturk, K and Peksoz, A},
	doi = {10.1155/2017/2625132},
	journal-iso = {SCANNING},
	journal = {SCANNING},
	unique-id = {26564021},
	issn = {0161-0457},
	year = {2017},
	eissn = {1932-8745}
}

@article{MTMT:26564019,
	title = {Electrochemical properties of stoichiometric CuS coated on carbon fiber paper and Cu foil current collectors as cathode material for lithium batteries},
	url = {https://m2.mtmt.hu/api/publication/26564019},
	author = {Kalimuldina, Gulnur and Taniguchi, Izumi},
	doi = {10.1039/c7ta00614d},
	journal-iso = {J MATER CHEM A},
	journal = {JOURNAL OF MATERIALS CHEMISTRY A},
	volume = {5},
	unique-id = {26564019},
	issn = {2050-7488},
	year = {2017},
	eissn = {2050-7496},
	pages = {6937-6946}
}

@article{MTMT:26388993,
	title = {Assembly of a check-patterned CuSx-TiO2 film with an electron-rich pool and its application for the photoreduction of carbon dioxide to methane},
	url = {https://m2.mtmt.hu/api/publication/26388993},
	author = {Lee, Homin and Kwak, Byeong Sub and Park, No-Kuk and Baek, Jeom-In and Ryu, Ho-Jung and Kang, Misook},
	doi = {10.1016/j.apsusc.2016.10.026},
	journal-iso = {APPL SURF SCI},
	journal = {APPLIED SURFACE SCIENCE},
	volume = {393},
	unique-id = {26388993},
	issn = {0169-4332},
	year = {2017},
	eissn = {1873-5584},
	pages = {385-396}
}

@article{MTMT:26564020,
	title = {Laser processing of copper sulfide thin film prepared by spray pyrolysis},
	url = {https://m2.mtmt.hu/api/publication/26564020},
	author = {Mahmoud, F A and Magdy, W and Gadallah, A -S and Nasr, Mahmoud and Azzouz, I M},
	doi = {10.1007/s10854-016-6310-7},
	journal-iso = {J MATER SCI: MATER EL},
	journal = {JOURNAL OF MATERIALS SCIENCE: MATERIALS IN ELECTRONICS},
	volume = {28},
	unique-id = {26564020},
	issn = {0957-4522},
	year = {2017},
	eissn = {1573-482X},
	pages = {6284-6291}
}

@article{MTMT:27080907,
	title = {Crystalline phase evolution in nanostructured copper sulfide thin films prepared by spray pyrolysis method: the effect of annealing},
	url = {https://m2.mtmt.hu/api/publication/27080907},
	author = {Nazari, Roshanak Rafiei and Taloobaghi, Hoda Enayati and Eshghi, Hosein},
	doi = {10.1515/msp-2017-0083},
	journal-iso = {MATER SCI-POLAND},
	journal = {MATERIALS SCIENCE-POLAND},
	volume = {35},
	unique-id = {27080907},
	issn = {2083-1331},
	year = {2017},
	eissn = {2083-134X},
	pages = {673-680}
}

@article{MTMT:26033098,
	title = {Spectrally selective CuS solar absorber coatings on stainless steel and aluminum},
	url = {https://m2.mtmt.hu/api/publication/26033098},
	author = {Cuevas, A and Romero, R and Dalchiele, E A and Ramos-Barrado, J R and Martin, F and Leinen, D},
	doi = {10.1002/sia.5971},
	journal-iso = {SURF INTERFACE ANAL},
	journal = {SURFACE AND INTERFACE ANALYSIS},
	volume = {48},
	unique-id = {26033098},
	issn = {0142-2421},
	year = {2016},
	eissn = {1096-9918},
	pages = {649-653}
}

@article{MTMT:25789016,
	title = {Phase Transformations of Copper Sulfide Nanocrystals: Towards Highly Efficient Quantum-Dot-Sensitized Solar Cells},
	url = {https://m2.mtmt.hu/api/publication/25789016},
	author = {Liu, Lige and Liu, Chang and Fu, Wenping and Deng, Luogen and Zhong, Haizheng},
	doi = {10.1002/cphc.201500627},
	journal-iso = {CHEMPHYSCHEM},
	journal = {CHEMPHYSCHEM: A EUROPEAN JOURNAL OF CHEMICAL PHYSICS AND PHYSICAL CHEMISTRY},
	volume = {17},
	unique-id = {25789016},
	issn = {1439-4235},
	year = {2016},
	eissn = {1439-7641},
	pages = {771-776}
}

@article{MTMT:24901732,
	title = {Effect of the stoichiometry of CuxS thin films on the optical and electrical properties and the solar thermal performance},
	url = {https://m2.mtmt.hu/api/publication/24901732},
	author = {Cuevas, A and Romero, R and Leinen, D and Dalchiele, E A and Ramos-Barrado, J R and Martin, F},
	doi = {10.1016/j.solmat.2014.11.048},
	journal-iso = {SOL ENERG MAT SOL C},
	journal = {SOLAR ENERGY MATERIALS AND SOLAR CELLS},
	volume = {134},
	unique-id = {24901732},
	issn = {0927-0248},
	year = {2015},
	eissn = {1879-3398},
	pages = {199-208}
}

@article{MTMT:24901731,
	title = {Synthesis and Photo-Response of CuS Thin Films by an In Situ Multi-Deposition Process at Room Temperature: A Facile and Eco-Friendly Approach},
	url = {https://m2.mtmt.hu/api/publication/24901731},
	author = {Liu, Weiyan and Ji, Huiming and Wang, Jian and Zheng, Xuerong and Lai, Junyun and Ji, Junna and Li, Tongfei and Ma, Yuanliang and Li, Haiqin and Zhao, Suqin and Jin, Zhengguo},
	doi = {10.1142/S1793292015500320},
	journal-iso = {NANO},
	journal = {NANO},
	volume = {10},
	unique-id = {24901731},
	issn = {1793-2920},
	year = {2015},
	eissn = {1793-7094}
}

@article{MTMT:2919844,
	title = {Thermally evolved gases from thiourea complexes of CuCl in air. Detailed comparisons by TG-FTIR and TG/DTA-MS for compounds poor and rich in thiourea},
	url = {https://m2.mtmt.hu/api/publication/2919844},
	author = {Madarász, János and Krunks, Malle and Niinisto, Lauri and Pokol, György},
	doi = {10.1007/s10973-015-4481-8},
	journal-iso = {J THERM ANAL CALORIM},
	journal = {JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY},
	volume = {120},
	unique-id = {2919844},
	issn = {1388-6150},
	year = {2015},
	eissn = {1572-8943},
	pages = {189-199},
	orcid-numbers = {Pokol, György/0000-0003-1597-9808}
}

@article{MTMT:24155783,
	title = {In situ fabricate Cu2S thin film with hierarchical petal-like nanostructures},
	url = {https://m2.mtmt.hu/api/publication/24155783},
	author = {Li, J and Zhao, HX and Chen, XH and Jia, HM and Zheng, Z},
	doi = {10.1016/j.materresbull.2013.04.027},
	journal-iso = {MATER RES BULL},
	journal = {MATERIALS RESEARCH BULLETIN},
	volume = {48},
	unique-id = {24155783},
	issn = {0025-5408},
	year = {2013},
	eissn = {1873-4227},
	pages = {2940-2943}
}

@article{MTMT:24155778,
	title = {An investigation on substrate temperature and copper to sulphur molar ratios on optical and electrical properties of nanostructural CuS thin films prepared by spray pyrolysis method},
	url = {https://m2.mtmt.hu/api/publication/24155778},
	author = {Adelifard, M and Eshghi, H and Mohagheghi, MMB},
	doi = {10.1016/j.apsusc.2012.02.079},
	journal-iso = {APPL SURF SCI},
	journal = {APPLIED SURFACE SCIENCE},
	volume = {258},
	unique-id = {24155778},
	issn = {0169-4332},
	year = {2012},
	eissn = {1873-5584},
	pages = {5733-5738}
}

@article{MTMT:24155779,
	title = {Comparative studies of spray pyrolysis deposited copper sulfide nanostructural thin films on glass and FTO coated glass},
	url = {https://m2.mtmt.hu/api/publication/24155779},
	author = {Adelifard, M and Eshghi, H and Mohagheghi, MMB},
	doi = {10.1007/s12034-012-0363-x},
	journal-iso = {B MATER SCI},
	journal = {BULLETIN OF MATERIALS SCIENCE},
	volume = {35},
	unique-id = {24155779},
	issn = {0250-4707},
	year = {2012},
	eissn = {0973-7669},
	pages = {739-744}
}

@article{MTMT:24155780,
	title = {Synthesis and characterization of nanostructural CuS-ZnS binary compound thin films prepared by spray pyrolysis},
	url = {https://m2.mtmt.hu/api/publication/24155780},
	author = {Adelifard, M and Eshghi, H and Mohagheghi, MMB},
	doi = {10.1016/j.optcom.2012.06.030},
	journal-iso = {OPT COMMUN},
	journal = {OPTICS COMMUNICATIONS},
	volume = {285},
	unique-id = {24155780},
	issn = {0030-4018},
	year = {2012},
	eissn = {1873-0310},
	pages = {4400-4404}
}

@article{MTMT:23282384,
	title = {Monte Carlo Simulation of Ion-Exchange Response of Copper Sulfide Ion Selective Electrode for Metal Pollutant Detection},
	url = {https://m2.mtmt.hu/api/publication/23282384},
	author = {Boudouh, H and Guessasma, S and Essehli, R and Aissat, A},
	doi = {10.1149/2.026203jes},
	journal-iso = {J ELECTROCHEM SOC},
	journal = {JOURNAL OF THE ELECTROCHEMICAL SOCIETY},
	volume = {159},
	unique-id = {23282384},
	issn = {0013-4651},
	year = {2012},
	eissn = {1945-7111},
	pages = {D148-D154}
}

@article{MTMT:24155782,
	title = {PREPARATION AND CHARACTERIZATION OF LOW RESISTIVITY CuS FILMS USING SPRAY PYROLYSIS},
	url = {https://m2.mtmt.hu/api/publication/24155782},
	author = {Nho, PV and Ngan, PH and Tien, NQ and Viet, HD},
	journal-iso = {CHALCOGEN LETT},
	journal = {CHALCOGENIDE LETTERS},
	volume = {9},
	unique-id = {24155782},
	issn = {1584-8663},
	year = {2012},
	eissn = {1584-8663},
	pages = {397-402}
}

@article{MTMT:21804154,
	title = {Luminescence and thermal behavior of copper (I) complexes with heterocyclic thiones. Part II: cationic complexes},
	url = {https://m2.mtmt.hu/api/publication/21804154},
	author = {Aslanidis, P and Chrissafis, K and Lalia-Kantouri, M},
	doi = {10.1007/s10973-010-1077-1},
	journal-iso = {J THERM ANAL CALORIM},
	journal = {JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY},
	volume = {103},
	unique-id = {21804154},
	issn = {1388-6150},
	year = {2011},
	eissn = {1572-8943},
	pages = {797-803}
}

@article{MTMT:24155775,
	title = {Spray pyrolytic deposition of polycrystalline Cu(2)S thin films},
	url = {https://m2.mtmt.hu/api/publication/24155775},
	author = {Kim, WY and Palve, BM and Pathan, HM and Joo, OS},
	doi = {10.1016/j.matchemphys.2011.10.015},
	journal-iso = {MATER CHEM PHYS},
	journal = {MATERIALS CHEMISTRY AND PHYSICS},
	volume = {131},
	unique-id = {24155775},
	issn = {0254-0584},
	year = {2011},
	eissn = {1879-3312},
	pages = {525-528}
}

@article{MTMT:24155776,
	title = {Laser photodeposition of sulfur and room-temperature solid-state reaction with copper},
	url = {https://m2.mtmt.hu/api/publication/24155776},
	author = {Pola, J and Urbanova, M and Pokorna, D and Bastl, Z and Bakardjieva, S and Subrt, J and Bezdicka, P},
	doi = {10.1016/j.jphotochem.2011.01.024},
	journal-iso = {J PHOTOCH PHOTOBIO A},
	journal = {JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY},
	volume = {219},
	unique-id = {24155776},
	issn = {1010-6030},
	year = {2011},
	eissn = {1873-2666},
	pages = {109-114}
}

@article{MTMT:2655221,
	title = {Evolved gas analyses on a mixed valence copper(I,II) complex salt with thiosulfate and ammonia by in situ TG-EGA-FTIR and TG/DTA-EGA-MS},
	url = {https://m2.mtmt.hu/api/publication/2655221},
	author = {Madarász, János},
	doi = {10.1007/s10973-009-0236-8},
	journal-iso = {J THERM ANAL CALORIM},
	journal = {JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY},
	volume = {97},
	unique-id = {2655221},
	issn = {1388-6150},
	abstract = {Thermal decomposition of a mixed valence copper salt, Na-4[Cu(NH3)(4)][Cu(S2O3)(2)](2)center dot 0.5NH(3) (1) prepared from pentahydrates of sodium thiosulfate and copper sulphate of various molar ratios in 1:1 v/v aqueous ammonia solution, has been studied up to 1,000 A degrees C in flowing air by simultaneous thermogravimetric and differential thermal analysis coupled online with quadrupole mass spectrometer (TG/DTA-MS) and FTIR spectrometric gas cell (TG-FTIR), in comparison. Compound 1 releases first but very slowly some of the included ammonia till 170 A degrees C, then simultaneously ammonia (NH3) and sulphur dioxide (SO2) from 175 to 225 A degrees C, whilst the evolution of SO2 from thiosulfate ligands continues in several overlapping stages until 410 A degrees C, and is escorted by explicit exothermic heat effects at around 237, 260, 358 and 410 A degrees C. The former two exothermic DTA-peaks correspond to the simultaneous degradation and air oxidation processes of excess thiosulfate anions not reacted by formation of copper sulfides (both digenite, Cu1.8S and covellite, CuS, checked by XRD) and sodium sulfate, while the last two exothermic peaks are accompanied also by considerable mass gains, as the result of two-step oxidation of copper sulfides into various oxosulfates. The mass increase continues further on until 580 A degrees C, when the sample mass begins to decrease slowly, as a continuous decomposition of the intermediate copper oxosulfates, indicated also by re-evolution of SO2. At 1,000 A degrees C, a residual mass value of 64.3% represents a stoichiometric formation of (CuO)-O-II and anhydrous Na2SO4.},
	year = {2009},
	eissn = {1572-8943},
	pages = {111-116}
}

@article{MTMT:20699864,
	title = {Formation of cus with flower-like, hollow spherical, and tubular structures using the solvothermal-microwave process},
	url = {https://m2.mtmt.hu/api/publication/20699864},
	author = {Thongtem, T and Phuruangrat, A and Thongtem, S},
	doi = {10.1016/j.cap.2008.01.011},
	journal-iso = {CURR APPL PHYS},
	journal = {CURRENT APPLIED PHYSICS},
	volume = {9},
	unique-id = {20699864},
	issn = {1567-1739},
	year = {2009},
	eissn = {1878-1675},
	pages = {195-200}
}

@article{MTMT:20699865,
	title = {Synthesis and characterization of copper sulfide nanocrystallites with low sintering temperatures},
	url = {https://m2.mtmt.hu/api/publication/20699865},
	author = {Shan, J and Pulkkinen, P and Vainio, U and Maijala, J and Merta, J and Jiang, H and Serimaa, R and Kauppinen, E and Tenhu, H},
	doi = {10.1039/b803547d},
	journal-iso = {J MATER CHEM},
	journal = {JOURNAL OF MATERIALS CHEMISTRY},
	volume = {18},
	unique-id = {20699865},
	issn = {0959-9428},
	year = {2008},
	eissn = {1364-5501},
	pages = {3200-3208}
}

@article{MTMT:20699867,
	title = {Copper sulfides obtained by spray pyrolysis - possible absorbers in solid-state solar cells},
	url = {https://m2.mtmt.hu/api/publication/20699867},
	author = {Isac, L and Duta, A and Kriza, A and Manolache, S and Nanu, M},
	doi = {10.1016/j.tsf.2006.12.073},
	journal-iso = {THIN SOLID FILMS},
	journal = {THIN SOLID FILMS},
	volume = {515},
	unique-id = {20699867},
	issn = {0040-6090},
	year = {2007},
	eissn = {1879-2731},
	pages = {5755-5758}
}

@article{MTMT:20699866,
	title = {Tailoring copper sulfide thin films morphology using spray pyrolysis deposition technique},
	url = {https://m2.mtmt.hu/api/publication/20699866},
	author = {Isac, LA and Duta, A and Nanu, M and Schoonman, J},
	journal-iso = {J OPTOELECTRON ADV M},
	journal = {JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS},
	volume = {9},
	unique-id = {20699866},
	issn = {1454-4164},
	year = {2007},
	eissn = {1841-7132},
	pages = {3072-3075}
}

@article{MTMT:24155774,
	title = {The growth of CuS thin films by Spray Pyrolysis},
	url = {https://m2.mtmt.hu/api/publication/24155774},
	author = {Isac, LA and Duta, A and Kriza, A and Enesca, IA and Nanu, M},
	doi = {10.1088/1742-6596/61/1/096},
	volume = {61},
	unique-id = {24155774},
	year = {2007},
	pages = {477-481}
}

@article{MTMT:1246188,
	title = {Comparative evolved gas analyses on thermal degradation of thiourea by coupled TG-FTIR and TG/DTA-MS instruments},
	url = {https://m2.mtmt.hu/api/publication/1246188},
	author = {Madarász, János and Pokol, György},
	doi = {10.1007/s10973-006-8058-4},
	journal-iso = {J THERM ANAL CALORIM},
	journal = {JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY},
	volume = {88},
	unique-id = {1246188},
	issn = {1388-6150},
	abstract = {Identification and monitoring of gaseous species released during
		thermal decomposition of pure thiourea, (NH2)(2)C=S in argon, helium
		and air atmosphere have been carried out by both online coupled TG-FTIR
		and simultaneous TG/DTA-MS apparatuses manufactured by TA Instruments
		(USA). In both inert atmospheres and air between 182 and 240 degrees C
		the main gaseous products of thiourea are ammonia (NH3) and carbon
		disulfide (CS2), whilst in flowing air sulphur dioxide (SO2) and
		carbonyl sulphide (COS) as gas phase oxidation products of CS2, and in
		addition hydrogen cyanide (HCN) also occur, which are detected by both
		FTIR spectroscopic and mass spectrometric EGA methods. Some evolution
		of isothiocyanic acid (HNCS) and cyanamide (NH2CN) vapours have also
		observed mainly by EGA-FTIR, and largely depending on the experimental
		conditions. HNCS is hardly identified by mass spectrometry. Any
		evolution of H2S has not been detected at any stage of thiourea
		degradation by either of the two methods. The exothermic heat effect of
		gas phase oxidation process of CS2 partially compensates the
		endothermicity of the corresponding degradation step producing CS2.},
	year = {2007},
	eissn = {1572-8943},
	pages = {329-336},
	orcid-numbers = {Pokol, György/0000-0003-1597-9808}
}

@article{MTMT:20699869,
	title = {Electrical properties of plastic/cuxs/ni composites},
	url = {https://m2.mtmt.hu/api/publication/20699869},
	author = {Popescu, V and Nascu, HI},
	journal-iso = {J OPTOELECTRON ADV M},
	journal = {JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS},
	volume = {8},
	unique-id = {20699869},
	issn = {1454-4164},
	year = {2006},
	eissn = {1841-7132},
	pages = {1874-1878}
}

@{MTMT:24155781,
	title = {Films and powders of fluorine-doped tin dioxide},
	url = {https://m2.mtmt.hu/api/publication/24155781},
	author = {Cachet, H},
	booktitle = {FLUORINATED MATERIALS FOR ENERGY CONVERSION},
	doi = {10.1016/B978-008044472-7/50050-3},
	unique-id = {24155781},
	year = {2005},
	pages = {513-534}
}

@article{MTMT:21581725,
	title = {Formation of various morphologies of covellite copper sulfide submicron crystals by a hydrothermal method without surfactant},
	url = {https://m2.mtmt.hu/api/publication/21581725},
	author = {Qin, AM and Fang, YP and Ou, HD and Liu, HQ and Su, CY},
	doi = {10.1021/cg049736o},
	journal-iso = {CRYST GROWTH DES},
	journal = {CRYSTAL GROWTH & DESIGN},
	volume = {5},
	unique-id = {21581725},
	issn = {1528-7483},
	year = {2005},
	eissn = {1528-7505},
	pages = {855-860}
}

@article{MTMT:114810,
	title = {Comparative online coupled TG-FTIR and TG/DTA-MS analyses of the evolved gases from thiourea complexes of SnCl2. Tetrachloropenta(thiourea) ditin(II), a compound rich in thiourea},
	url = {https://m2.mtmt.hu/api/publication/114810},
	author = {Madarász, János and Bombicz, Petra and Okuya, M and Kaneko, S and Pokol, György},
	doi = {10.1016/j.jaap.2004.06.003},
	journal-iso = {J ANAL APPL PYROL},
	journal = {JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS},
	volume = {72},
	unique-id = {114810},
	issn = {0165-2370},
	year = {2004},
	eissn = {1873-250X},
	pages = {209-214},
	orcid-numbers = {Bombicz, Petra/0000-0002-5509-1515; Pokol, György/0000-0003-1597-9808}
}

@article{MTMT:114809,
	title = {Online coupled TG-FTIR and TG/DTA-MS analyses of the evolved gases from dichloro(thiourea) tin(II)},
	url = {https://m2.mtmt.hu/api/publication/114809},
	author = {Madarász, János and Bombicz, Petra and Okuya, M and Kaneko, S and Pokol, György},
	doi = {10.1016/j.ssi.2004.02.065},
	journal-iso = {SOLID STATE IONICS},
	journal = {SOLID STATE IONICS},
	volume = {172},
	unique-id = {114809},
	issn = {0167-2738},
	year = {2004},
	eissn = {1872-7689},
	pages = {577-581},
	orcid-numbers = {Bombicz, Petra/0000-0002-5509-1515; Pokol, György/0000-0003-1597-9808}
}

@article{MTMT:20699873,
	title = {Preparation and characterization of nizn ferrite thin films by a spray pyrolysis deposition method},
	url = {https://m2.mtmt.hu/api/publication/20699873},
	author = {Takayama, A and Kondo, K and Okuya, M and Kaneko, S},
	journal-iso = {J CERAM SOC JPN},
	journal = {JOURNAL OF THE CERAMIC SOCIETY OF JAPAN},
	volume = {110},
	unique-id = {20699873},
	issn = {1882-0743},
	year = {2002},
	eissn = {1348-6535},
	pages = {916-920}
}