@article{MTMT:31842848,
	title = {Drilling fibre reinforced polymer composites (CFRP and GFRP): An analysis of the cutting force of the tilted helical milling process},
	url = {https://m2.mtmt.hu/api/publication/31842848},
	author = {Pereszlai, Csongor and Geier, Norbert and Poór, Dániel István and Balázs, Barnabás Zoltán and Póka, György},
	doi = {10.1016/j.compstruct.2021.113646},
	journal-iso = {COMPOS STRUCT},
	journal = {COMPOSITE STRUCTURES},
	volume = {262},
	unique-id = {31842848},
	issn = {0263-8223},
	abstract = {Hole making is one of the most common machining operations in fibrous composites. Holes can be
		produced using conventional machining technologies. However, in these cases, the size of
		delamination and burr appearance are often significant mostly due to the relatively large axial cutting
		forces. The main purpose of this research paper is to optimise and compare tilted helical milling
		processes in the case of carbon and glass fibre reinforced polymer (CFRP and GFRP) composites. In
		the scope of this research paper, numerous tilted helical milling experiments were carried out on CFRP
		and GFRP composites using an uncoated carbide end mill. The influences of the tilting angle and the
		pitch of the helical tool path on the axial cutting force were analysed and discussed based on
		experimental results and analytical models. In addition, machining-induced burr and microstructure
		were analysed using optical-digital and scanning electron microscopy, respectively. Experimental
		results show that both cutting force and burr are significantly influenced by pitch and tilting angle.
		Furthermore, the maximisation of the tilting angle is recommended in any of the cases examined in the
		scope of our study.},
	keywords = {COMPOSITES; Cutting force; Hole making; burr; Tilted helical milling},
	year = {2021},
	eissn = {1879-1085},
	orcid-numbers = {Pereszlai, Csongor/0000-0002-2336-6457; Geier, Norbert/0000-0001-7937-7246; Poór, Dániel István/0000-0002-8036-7966; Balázs, Barnabás Zoltán/0000-0001-5235-1388; Póka, György/0000-0002-7585-986X}
}

@article{MTMT:30775086,
	title = {Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: A review},
	url = {https://m2.mtmt.hu/api/publication/30775086},
	author = {Geier, Norbert and Davim, J. Paulo and Szalay, Tibor},
	doi = {10.1016/j.compositesa.2019.105552},
	journal-iso = {COMPOS PART A-APPL S},
	journal = {COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING},
	volume = {125},
	unique-id = {30775086},
	issn = {1359-835X},
	year = {2019},
	eissn = {1878-5840},
	orcid-numbers = {Geier, Norbert/0000-0001-7937-7246; Szalay, Tibor/0000-0003-3446-2898}
}