TY - JOUR AU - Zhao, Rui AU - Zhang, Xi AU - Yang, Dinghua AU - Chen, Xia AU - Su, Xingli AU - Nie, Ya AU - Xiang, Gang TI - Mn-doped GeSn diluted magnetic semiconductors with room-temperature ferromagnetism JF - MATERIALS LETTERS J2 - MATER LETT VL - 426 PY - 2027 PG - 4 SN - 0167-577X DO - 10.1016/j.matlet.2026.141663 UR - https://m2.mtmt.hu/api/publication/37579276 ID - 37579276 LA - English DB - MTMT ER - TY - JOUR AU - Yu, Yanlong AU - Li, Ke AU - Guo, Chunmin AU - Liu, Ruoxi AU - Sun, Yang AU - Jiang, Yubing AU - Gao, Rui AU - Wang, Xiaoliang AU - Sun, Hongyu TI - Dual-solvent-mediated controllable synthesis of BiOCl with enhanced photocatalytic performance JF - MATERIALS LETTERS J2 - MATER LETT VL - 426 PY - 2027 PG - 4 SN - 0167-577X DO - 10.1016/j.matlet.2026.141731 UR - https://m2.mtmt.hu/api/publication/37673188 ID - 37673188 LA - English DB - MTMT ER - TY - JOUR AU - Wang, Chenxu AU - Jia, Ruike AU - Ayeza, null AU - Nawaz, Iqra AU - Ran, Chunjing AU - Hu, Chao TI - Carbon-supported ag catalysts for MEA CO2-to-CO electroreduction: Effect of preparation route on ag particle size and catalytic performance JF - MATERIALS LETTERS J2 - MATER LETT VL - 426 PY - 2027 PG - 4 SN - 0167-577X DO - 10.1016/j.matlet.2026.141691 UR - https://m2.mtmt.hu/api/publication/37704948 ID - 37704948 LA - English DB - MTMT ER - TY - JOUR AU - Tsai, J.T.-H. AU - Pan, W.-Y. TI - Photo-assisted field emission from mechanically exposed CVD-grown graphene edges JF - MATERIALS LETTERS J2 - MATER LETT VL - 428 PY - 2027 SN - 0167-577X DO - 10.1016/j.matlet.2026.141891 UR - https://m2.mtmt.hu/api/publication/37789091 ID - 37789091 N1 - EID: 2-s2.0-105054500410 Export Date: 09 November 2026 Cited By: 0 Correspondence Address: J.T.-H. Tsai; Department of Optoelectronics and Materials Technology, National Taiwan Ocean University, Keelung, Taiwan; email: thtsai@mail.ntou.edu.tw CODEN: MLETD AB - Graphene edges combine atomic-scale sharpness and high conductivity, but optically controlled field emission from mechanically exposed chemical-vapor-deposited graphene remains underexplored. Here, few-layer graphene was grown on Cu foil and converted into edge emitters by mechanical pulling. Raman spectroscopy showed an IG/I2D ratio of approximately 0.38, consistent with one- to two-layer graphene. SEM confirmed protruding graphene edges at the Cu tip. Under vacuum, 532 nm continuous-wave irradiation enhanced field emission. At 0.034 W heater power and 50 mW laser power, the turn-on field decreased from 14.23 to 11.97 V μm−1, while laser switching at E = 13.5 V μm−1 increased current by approximately 70%. Fowler-Nordheim analysis estimated an apparent field-enhancement factor of approximately 570. Mechanically exposed CVD graphene edges therefore provide compact, optically tunable emitters. © 2026 Elsevier B.V. LA - English DB - MTMT ER - TY - JOUR AU - Jiao, Yantao AU - Wu, Wangping TI - Effect of EDDS biodegradable chelating agent on the microstructure and corrosion resistance of electrodeposited Ni coatings for protective applications JF - MATERIALS LETTERS J2 - MATER LETT VL - 403 PY - 2026 SN - 0167-577X DO - 10.1016/j.matlet.2025.139513 UR - https://m2.mtmt.hu/api/publication/36338925 ID - 36338925 N1 - EID: 2-s2.0-105015980582 Export Date: 16 November 2026 CODEN: MLETD AB - Nickel coatings were electrodeposited from sulfate baths containing ethylenediamine-N,N′-disuccinic acid (EDDS), a biodegradable chelating agent. The influence of EDDS on the microstructure and corrosion behavior of the coating was studied. With increasing EDDS concentration, the grain size was refined by 62.5 % (26.13 to 9.79 nm), the thickness was reduced by 10.7 % (14.8 to 13.2 μm), and the preferred orientation shifted from (200) to (111). However, excessive amounts of EDDS induced microcracks and carbon absorption. EDDS-free coating exhibited the best corrosion resistance. The corrosion behavior of the coating decreased with the addition of EDDS. While the addition of EDDS effectively refines grains and improves uniformity, excessive amounts weaken the corrosion resistance of the coatings. Thus, a proper optimization of EDDS concentration is critical for balancing microstructural refinement and corrosion durability in its protective applications. LA - English DB - MTMT ER - TY - JOUR AU - Kishore, Kaushal AU - Meena, Lalit Kumar AU - Chandan, Avanish Kumar AU - Kawasaki, Megumi AU - Gubicza, Jenő TI - Corrosion behavior of coarse-grained and nanocrystalline Co33Ni33Cr19Mn15 and Co33Ni33Cr19Mn10Si5 multi-principal element alloys JF - MATERIALS LETTERS J2 - MATER LETT VL - 403 PY - 2026 SN - 0167-577X DO - 10.1016/j.matlet.2025.139509 UR - https://m2.mtmt.hu/api/publication/36348041 ID - 36348041 LA - English DB - MTMT ER - TY - JOUR AU - Hu, Qidong AU - Jiang, Shan AU - Dong, Pengfei AU - Tang, Lei AU - Yu, Keji AU - Fu, Bicheng AU - Li, Xiangji AU - Cui, Peng AU - Li, Mingyu AU - Wang, Xiaoting AU - Zhu, Wenbo TI - Wetting confined conformal soldering for large-scale interconnection through AgNW aerogel composite preform JF - MATERIALS LETTERS J2 - MATER LETT VL - 404 PY - 2026 SN - 0167-577X DO - 10.1016/j.matlet.2025.139630 UR - https://m2.mtmt.hu/api/publication/36366193 ID - 36366193 LA - English DB - MTMT ER - TY - JOUR AU - Udourioh, Godwin A. AU - Ukogu, Wisdom Nnamdi AU - Agbaghare, Daniel AU - Adewumi, Chizoma N. AU - Solomon, Moses M. AU - Ikeuba, Alexander I. TI - Comparative study of MIL-53(Al) metal-organic framework synthesized via solvothermal and mechanochemical routes JF - MATERIALS LETTERS J2 - MATER LETT VL - 403 PY - 2026 PG - 4 SN - 0167-577X DO - 10.1016/j.matlet.2025.139475 UR - https://m2.mtmt.hu/api/publication/36372086 ID - 36372086 N1 - Funding Agency and Grant Number: Veritas University Governing Council Seed Grant [VUA/ 2024/SG/003]; [VUA/2024/SG/003] Funding text: Funding Veritas University Governing Council Seed Grant Ref No: VUA/2024/SG/003. AB - This study compares solvothermal (ST) and mechanochemical (MC) synthesis of MIL-53(Al). ST used Al (NO3)3.9H2O and H2BDC in DMF (200 degrees C, 24 h), while MC employed ball-milling of Al(NO3)3.9H2O and H2BDC with NaCl (30 Hz, 1 h). Both yielded phase MIL-53(Al) confirmed by XRD and FTIR. ST produced larger crystals with superior crystallinity and thermal stability. MC offered a faster, solvent-minimized route yielding 100 % Al-pure material (by EDX), ideal for purity-sensitive applications like drug delivery. MC is a viable green alternative despite marginally reduced crystallinity. LA - English DB - MTMT ER - TY - JOUR AU - Simpkins, B.S. AU - Tighe, M.E. AU - Novak, T.G. AU - Ratchford, D.C. AU - Thum, M.D. TI - Chemically directed MOF growth in acrylate HIPEs JF - MATERIALS LETTERS J2 - MATER LETT VL - 404 PY - 2026 SN - 0167-577X DO - 10.1016/j.matlet.2025.139603 UR - https://m2.mtmt.hu/api/publication/36374369 ID - 36374369 LA - English DB - MTMT ER - TY - JOUR AU - Renganathan, Keerthi AU - Jain, Ratnesh AU - Chheda, Darshan AU - Gadipelly, Chandrakanth AU - Gaikwad, Ganesh TI - Development of a continuous-flow microfluidic process for microsphere production JF - MATERIALS LETTERS J2 - MATER LETT VL - 404 PY - 2026 SN - 0167-577X DO - 10.1016/j.matlet.2025.139599 UR - https://m2.mtmt.hu/api/publication/36409078 ID - 36409078 N1 - Amar Biosystems Pvt Ltd., Mumbai, 400078, India Amar Flow Laboratory LLP, Mumbai, 400078, India Institute of Chemical Technology, Mumbai, 400019, India Export Date: 02 June 2026; Cited By: 0; Correspondence Address: G. Gaikwad; Amar Biosystems Pvt. Ltd., Mumbai, 400078, India; email: ganesh.gaikwad@amarbiosystems.com; CODEN: MLETD LA - English DB - MTMT ER -