@article{MTMT:33541220,
	title = {Characterization of residual stress state after turning of bearing rings},
	url = {https://m2.mtmt.hu/api/publication/33541220},
	author = {Zaghal, Jawad and Mertinger, Valéria and Filep, Ádám and Benke, Márton},
	journal-iso = {Doktorandusz Almanach},
	journal = {Doktorandusz Almanach},
	volume = {1},
	unique-id = {33541220},
	issn = {2939-7294},
	year = {2022},
	pages = {313-318},
	orcid-numbers = {Zaghal, Jawad/0000-0003-3374-7947; Mertinger, Valéria/0000-0002-5951-0801}
}

@article{MTMT:33042722,
	title = {Preparation, characterization, and physicomechanical properties of glass-ceramic foams based on alkali-activation and sintering of zeolite-poor rock and eggshell. Zeolite-poor rock, Eggshell, Alkali activation, Compressive strength, Thermal conductivity},
	url = {https://m2.mtmt.hu/api/publication/33042722},
	author = {FADOUL MOHAMMED IBRAHIM, JAMAL ELDIN and Gömze, Antal László and Koncz-Horváth, Dániel and Filep, Ádám and Kocserha, István},
	doi = {10.1016/j.ceramint.2022.05.267},
	journal-iso = {CERAM INT},
	journal = {CERAMICS INTERNATIONAL},
	volume = {48},
	unique-id = {33042722},
	issn = {0272-8842},
	year = {2022},
	eissn = {1873-3956},
	pages = {25905-25917}
}

@article{MTMT:32588987,
	title = {Exploring the Potential to Repurpose Flexible Moulded Polyurethane Foams as Acoustic Insulators},
	url = {https://m2.mtmt.hu/api/publication/32588987},
	author = {Hornyák-Mester, Enikő and Pecsmány , Dániel János and Jálics, Károly and Filep, Ádám and Varga, Miklós and Gráczer, Kitti and Viskolcz, Béla and Fiser, Béla},
	doi = {10.3390/polym14010163},
	journal-iso = {POLYMERS-BASEL},
	journal = {POLYMERS},
	volume = {14},
	unique-id = {32588987},
	year = {2022},
	eissn = {2073-4360},
	orcid-numbers = {Jálics, Károly/0000-0003-0749-7569; Fiser, Béla/0000-0003-0603-4626}
}

@article{MTMT:32546182,
	title = {Komputertomográfia alkalmazása a gyakorlatban},
	url = {https://m2.mtmt.hu/api/publication/32546182},
	author = {Kazup, Ágota and Bubonyi, Tamás and Filep, Ádám and Gácsi, Zoltán},
	journal-iso = {ANYAGVIZSGÁLÓK LAPJA},
	journal = {ANYAGVIZSGÁLÓK LAPJA},
	unique-id = {32546182},
	issn = {1215-8410},
	abstract = {A technológiai fejlődés olyan roncsolásmentes anyagvizsgálati módszereket kíván, melyek gyorsan és pontosan kivitelezhetőek. A komputertomográfia az anyagokban lévő fázisok 3D-s szerkezetének széleskörű jellemzésére alkalmas módszer, amelynek gyakorlati alkalmazhatóságát mutatja be ez a cikk. Bemutatjuk a kompozit fémhabok, az alumínium öntvények, a poliuretán habok és kőzetek vizsgálati lehetőségeit, kitérve a képelemzés alkalmazására.},
	year = {2021},
	eissn = {1787-5072},
	pages = {12-17}
}

@article{MTMT:32531392,
	title = {Characterization of Residual Stresses Induced into Bearing Rings by Means of Turning in Soft State Using Different Turning Parameters},
	url = {https://m2.mtmt.hu/api/publication/32531392},
	author = {Zaghal, Jawad and Mertinger, Valéria and Filep, Ádám and Varga, Gyula and Benke, Márton},
	doi = {10.36897/jme/144299},
	journal-iso = {J MACHINE ENG},
	journal = {JOURNAL OF MACHINE ENGINEERING},
	volume = {21},
	unique-id = {32531392},
	issn = {1895-7595},
	year = {2021},
	pages = {49-56},
	orcid-numbers = {Zaghal, Jawad/0000-0003-3374-7947; Mertinger, Valéria/0000-0002-5951-0801; Varga, Gyula/0000-0002-1956-790X}
}

@article{MTMT:32092398,
	title = {Preparation of Bamboo-Like Carbon Nanotube Loaded Piezoresistive Polyurethane-Silicone Rubber Composite},
	url = {https://m2.mtmt.hu/api/publication/32092398},
	author = {Al-Mandalawi, Mohammed and Varga, Miklós and Kuzsella, László and Filep, Ádám and Fiser, Béla and Viskolcz, Béla and Szabóné Kollár, Mariann and Vanyorek, László},
	doi = {10.3390/polym13132144},
	journal-iso = {POLYMERS-BASEL},
	journal = {POLYMERS},
	volume = {13},
	unique-id = {32092398},
	year = {2021},
	eissn = {2073-4360},
	orcid-numbers = {Fiser, Béla/0000-0003-0603-4626}
}

@article{MTMT:32035878,
	title = {Synthesis of activated carbon foams with high specific surface area using polyurethane elastomer templates for effective removal of methylene blue},
	url = {https://m2.mtmt.hu/api/publication/32035878},
	author = {Udayakumar, Mahitha and El Mrabate, Bilal and Koós, Tamás and Szemmelveiszné Hodvogner, Katalin and Kristály, Ferenc and Leskó, Máté Zsigmond and Filep, Ádám and Géber, Róbert and Schabikowski, Mateusz and Baumli, Péter and Lakatos, János and Lukács (Tóth), Pál and Németh, Zoltán},
	doi = {10.1016/j.arabjc.2021.103214},
	journal-iso = {ARAB J CHEM},
	journal = {ARABIAN JOURNAL OF CHEMISTRY},
	volume = {14},
	unique-id = {32035878},
	issn = {1878-5352},
	abstract = {Carbon foams have gained significant attention due to their tuneable properties that enable a wide range of applications including catalysis, energy storage and wastewater treatment. Novel synthesis pathways enable novel applications via yielding complex, hierarchical material structure. In this work, activated carbon foams (ACFs) were produced from waste polyurethane elastomer templates using different synthesis pathways, including a novel one-step method. Uniquely, the produced foams exhibited complex structure and contained carbon microspheres. The ACFs were synthesized by impregnating the elastomers in an acidified sucrose solution followed by direct activation using CO2 at 1000 celcius. Different pyrolysis and activation conditions were investigated. The ACFs were characterized by a high specific surface area (SBET) of 2172 m(2)/g and an enhanced pore volume of 1.08 cm(3)/g. Computer tomography and morphological studies revealed an inhomogeneous porous structure and the presence of numerous carbon spheres of varying sizes embedded in the porous network of the three-dimensional carbon foam. X-ray diffraction (XRD) and Raman spectroscopy indicated that the obtained carbon foam was amorphous and of turbostratic structure. Moreover, the activation process enhanced the surface of the carbon foam, making it more hydrophilic via altering pore size distribution and introducing oxygen functional groups. In equilibrium, the adsorption of methylene blue on ACF followed the Langmuir isotherm model with a maximum adsorption capacity of 592 mg/g. Based on these results, the produced ACFs have potential applications as adsorbents, catalyst support and electrode material in energy storage systems. (C) 2021 The Author(s). Published by Elsevier B.V. on behalf of King Saud University.},
	keywords = {Specific surface area; PORE SIZE DISTRIBUTION; Polyurethane elastomer; Methylene blue adsorption; Carbon sphere; Activated carbon foam},
	year = {2021},
	eissn = {1878-5379},
	orcid-numbers = {Kristály, Ferenc/0000-0002-0075-5994; Géber, Róbert/0000-0002-0973-863X; Németh, Zoltán/0000-0001-7871-3818}
}

@article{MTMT:32035820,
	title = {Widespread applicability of bacterial cellulose-ZnO-MWCNT hybrid membranes},
	url = {https://m2.mtmt.hu/api/publication/32035820},
	author = {El Mrabate, Bilal and Dorogházi, Emma and Shehab, Mohammed and Chauhan, Tanya and Muránszky, Gábor and Sikora, Emőke and Filep, Ádám and Sharma, Nikita and Nánai, Lilla and Hernádi, Klára and Németh, Zoltán},
	doi = {10.1016/j.arabjc.2021.103232},
	journal-iso = {ARAB J CHEM},
	journal = {ARABIAN JOURNAL OF CHEMISTRY},
	volume = {14},
	unique-id = {32035820},
	issn = {1878-5352},
	year = {2021},
	eissn = {1878-5379},
	orcid-numbers = {Nánai, Lilla/0000-0002-3216-2210; Hernádi, Klára/0000-0001-9419-689X; Németh, Zoltán/0000-0001-7871-3818}
}

@article{MTMT:31933629,
	title = {Producing compressive stresses in the surface layer of spheroidal graphite cast iron by laser hardening},
	url = {https://m2.mtmt.hu/api/publication/31933629},
	author = {Maloveczky, Anna and Filep, Ádám and Buza, Gábor and Vida, Ádám},
	doi = {10.1088/1757-899X/903/1/012027},
	journal-iso = {IOP CONF SER MATER SCI ENG},
	journal = {IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING},
	volume = {903},
	unique-id = {31933629},
	issn = {1757-8981},
	year = {2020},
	eissn = {1757-899X},
	orcid-numbers = {Vida, Ádám/0000-0002-0519-2772}
}

@article{MTMT:30702988,
	title = {Compressive characteristics of bimodal aluminium matrix syntactic foams},
	url = {https://m2.mtmt.hu/api/publication/30702988},
	author = {Orbulov, Imre Norbert and Kemény, Alexandra and Filep, Ádám and Gácsi, Zoltán},
	doi = {10.1016/j.compositesa.2019.105479},
	journal-iso = {COMPOS PART A-APPL S},
	journal = {COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING},
	volume = {124},
	unique-id = {30702988},
	issn = {1359-835X},
	year = {2019},
	eissn = {1878-5840},
	orcid-numbers = {Orbulov, Imre Norbert/0000-0002-5358-0630; Kemény, Alexandra/0000-0001-8239-2252}
}