@article{MTMT:34775436,
	title = {Some insights on the COVID-19 pandemic from Fisher information},
	url = {https://m2.mtmt.hu/api/publication/34775436},
	author = {Cabezas, Heriberto and Štefančić, Hrvoje},
	doi = {10.1016/j.heliyon.2024.e26707},
	journal-iso = {HELIYON},
	journal = {HELIYON},
	volume = {10},
	unique-id = {34775436},
	year = {2024},
	eissn = {2405-8440}
}

@article{MTMT:34765652,
	title = {Results from the further development of CGI inversion on simulation and field data systems},
	url = {https://m2.mtmt.hu/api/publication/34765652},
	author = {Gyulai, Ákos and Turai, Endre and Baracza, Mátyás Krisztián and Nádasi, Endre and Dankó, George},
	doi = {10.1556/24.2023.00131},
	journal-iso = {CENT EUR GEOL},
	journal = {CENTRAL EUROPEAN GEOLOGY},
	volume = {67},
	unique-id = {34765652},
	issn = {1788-2281},
	abstract = {A new series expansion-based method, the Combined Geoelectric Weighted Inversion (CGWI) procedure is presented and tested by using synthetic and in-field measured datasets. The method is an improved version of the Combined Geoelectric Inversion (CGI) robustified by involving Cauchy-Steiner weights in an Iteratively Reweighted Least Squares technique. The new procedure is compared to the Fourier series expansion-based 1.5D and the CGI methods as well as to the broadly applied RES2DINV inversion procedure. The field measurements are performed during stone exploration in an active quarry on the south-western slopes of the Mátra mountains, in northern Hungary. It is shown that the CGWI method gives stable and robust parameter estimation with acceptable accuracy. The comparison with other inversion methods is based on data distances, estimation errors and correlation parameters calculated on the base of the parameter correlation matrix.},
	year = {2024},
	eissn = {1789-3348},
	orcid-numbers = {Nádasi, Endre/0000-0001-5325-6657}
}

@article{MTMT:34765634,
	title = {A hazai fosszilisszénhidrogén-vagyonban rejlő lehetőségek},
	url = {https://m2.mtmt.hu/api/publication/34765634},
	author = {Velledits, Felicitász and Kiss, Károly and Baracza, Mátyás Krisztián},
	doi = {10.1556/112.2023.00165},
	journal-iso = {SCI SEC},
	journal = {SCIENTIA ET SECURITAS},
	volume = {5},
	unique-id = {34765634},
	year = {2024},
	eissn = {2732-2688},
	pages = {1-11}
}

@article{MTMT:34528126,
	title = {Archeogeophysical application of non-traditional geoelectric arrays. a case study in a north-east Hungary site},
	url = {https://m2.mtmt.hu/api/publication/34528126},
	author = {Kárpi, Marcell and Baracza, Mátyás Krisztián and Szalai, Sándor},
	doi = {10.47833/2024.1.ENG.001},
	journal-iso = {GRADUS},
	journal = {GRADUS},
	volume = {11},
	unique-id = {34528126},
	abstract = {With the continuous development of multielectrode geoelectrical tomography (ERT) as a geophysical technique, we became able to detect small size targets. In this paper, we present ERT interpretation results obtained at an archaeological site in Szendrő village in northeastern Hungary, where a 17th century fortress once stood. Several historical notes and a collapsed entrance recall the existence of tunnels under the fortress and a water well of uncertain depth. To detect these structures, geoelectrical multielectrode measurements were carried out using conventional and quasi-null arrays. The quasi-null array applies the arrangement of the current (A and B) and potential electrodes (M and N) in a special way, i.e., the electrodes A, M, B, N follow each other in line in special distances from each other. The horizontal sensitivity of the resistivity profiling method using these types of arrays has been proven to be better than that of the Wenner or other conventional arrays. The comparative study aims not just to investigate the archeological features, but to test the sensitivity of the non-traditional quasi-null arrays to these two-dimensional inhomogeneities. As a result, the optimal array can be chosen, and the identification and delineation of shallow structures can be made more reliably. In this paper, we present the very first archeogeophysical field measurements carried out by the gamma quasi null array (γqnull).},
	year = {2024},
	eissn = {2064-8014}
}

@article{MTMT:34399693,
	title = {Fracture system characterization by Pressure Probe},
	url = {https://m2.mtmt.hu/api/publication/34399693},
	author = {Szalai, Sándor and Szűcs, Péter and Lemperger, István and Zubair, M and Metwaly, M and Gribovszki, Katalin Eszter and Baracza, Mátyás Krisztián},
	doi = {10.3311/PPci.19916},
	journal-iso = {PERIOD POLYTECH CIV ENG},
	journal = {PERIODICA POLYTECHNICA-CIVIL ENGINEERING},
	volume = {68},
	unique-id = {34399693},
	issn = {0553-6626},
	abstract = {Pressure Probe (PreP) is in effect a simplified penetrometer: it measures the mechanical resistivity of the soil at shallow depths dropping the probe always from the same height. The resolution of this technique is very good. It is able to detect e.g., fractures due to their decreased mechanical resistance if they are covered, but in a shallow depth with a reasonable sampling distance. An example will be demonstrated where fracture system of a slowly-moving landslide was characterized enabling also its delineation. In spite of that its maximal penetration is only about 0.5 m it may also give information from remarkable depths in case if fractures reach close to the surface indicating the borders of geological structures in larger depth. An example from India will be shown to present such results. All results have been verified by geoelectric measurements. PreP may also indicate any kind of hidden holes indirectly.},
	year = {2024},
	eissn = {1587-3773},
	pages = {358-363},
	orcid-numbers = {Gribovszki, Katalin Eszter/0000-0003-2577-0127}
}

@article{MTMT:34550526,
	title = {Analysis of Blasthole Fracture System for REGS},
	url = {https://m2.mtmt.hu/api/publication/34550526},
	author = {Dankó, György and Baracza, Mátyás Krisztián},
	journal-iso = {TRANS GEOTHERM},
	journal = {TRANSACTIONS OF THE GEOTHERMAL RESOURCES COUNCIL},
	volume = {47},
	unique-id = {34550526},
	issn = {0193-5933},
	year = {2023},
	pages = {534-544}
}

@misc{MTMT:34549092,
	title = {Supply Chain Design and Optimization for Plastics at the End-of-Life: City-Based Study},
	url = {https://m2.mtmt.hu/api/publication/34549092},
	author = {Kumar, Baibhaw and Natalia, Cano-Londoño and Gerardo, Ruiz-Mercado and Cabezas, Heriberto and Deák, Csaba},
	unique-id = {34549092},
	year = {2023},
	orcid-numbers = {Deák, Csaba/0000-0002-2160-7472}
}

@article{MTMT:34514205,
	title = {Applicability of mineral raw materials in the food industry and agriculture as nanomaterials - A review},
	url = {https://m2.mtmt.hu/api/publication/34514205},
	author = {Zákányiné Mészáros, Renáta and Zákányi, Balázs Zsolt and Baracza, Mátyás Krisztián},
	journal-iso = {BKL},
	journal = {BÁNYÁSZATI ÉS KOHÁSZATI LAPOK (2023-)},
	volume = {156},
	unique-id = {34514205},
	year = {2023},
	eissn = {2498-9322},
	pages = {51-61},
	orcid-numbers = {Zákányiné Mészáros, Renáta/0000-0001-9073-7599; Zákányi, Balázs Zsolt/0000-0003-1848-2688}
}

@article{MTMT:34504360,
	title = {Comparison of human safety risks between old and new concrete mixing plant},
	url = {https://m2.mtmt.hu/api/publication/34504360},
	author = {Zákányiné Mészáros, Renáta and Laczkó, Levente and Zákányi, Balázs Zsolt},
	doi = {10.35925/j.multi.2023.1.31},
	journal-iso = {MULTIDISZCIPLINÁRIS TUDOMÁNYOK},
	journal = {MULTIDISZCIPLINÁRIS TUDOMÁNYOK: A MISKOLCI EGYETEM KÖZLEMÉNYE},
	volume = {13},
	unique-id = {34504360},
	issn = {2062-9737},
	abstract = {One of, if not the most important service sector today is construction. It is constantly changing, both in terms of materials and workforce. That is why it is important to monitor it from a health and safety perspective. New materials, products and equipment are regularly introduced to the market, and it is essential not only to review them in advance, but also to monitor their continued use from a safety perspective. From the point of view of building materials, if we look only at the increased battery production and the construction of the halls required for this, reinforced concrete, of which thousands of m3 are produced every year, has an absolute advantage. The production of a simple reinforced concrete element is a very long process, from the raw material extracted to the delivery of the finished product to the construction site. In the 21st century, it has become clear to us that the future lies in robotisation and the constant introduction of electronics. The more machines, the more hazards. As in any other factory, the improvements in the plant under review are being made in parallel with the need to ensure safety at work. Newly installed and/or commissioned machines and equipment are subject to preliminary and periodic inspections and maintenance. This is no different for the concrete mixing plant of the company under investigation, which is constantly being improved and refined in order to develop the most efficient and safest production technologies. The aim of our work is to illustrate the new Italian-made concrete mixing plant installed when the existing mixer was replaced in the 1990s, and to show how this improvement and the use of modern technology have enabled the company to reduce the risks and make the plant safer from the point of view of health and safety.},
	year = {2023},
	eissn = {2786-1465},
	pages = {411-419},
	orcid-numbers = {Zákányiné Mészáros, Renáta/0000-0001-9073-7599; Zákányi, Balázs Zsolt/0000-0003-1848-2688}
}

@article{MTMT:34504354,
	title = {Risk reduction effects of introducing an automated painting process},
	url = {https://m2.mtmt.hu/api/publication/34504354},
	author = {Zákányiné Mészáros, Renáta and Ritli, Réka and Szilágyiné Sebők, Szilvia and Zákányi, Balázs Zsolt},
	doi = {10.35925/j.multi.2023.1.29},
	journal-iso = {MULTIDISZCIPLINÁRIS TUDOMÁNYOK},
	journal = {MULTIDISZCIPLINÁRIS TUDOMÁNYOK: A MISKOLCI EGYETEM KÖZLEMÉNYE},
	volume = {13},
	unique-id = {34504354},
	issn = {2062-9737},
	abstract = {As a consequence of the expansion of occupations, the emergence of new businesses and new forms of occupation, the risks to workers have increased. The world of work, the modern manufacturing industry, is full of dangers and hazards in the form of accidents at work and occupational diseases. The boom in production and the economy, combined with ever-increasing expectations of work, has led to an increase in the number of accidents at work, including occupational diseases and fatalities. Lack of knowledge of the pathogenic factors and lack of technical or personal protection are still the main reasons for the occurrence and emergence of cases of increased exposure. In the case of work with certain hazardous substances, mandatory biological monitoring is often not carried out, although early detection of cases and appropriate measures by the employer could lead to a reduction or elimination of exposure. Our work has investigated the health effects of workers exposed to chemical agents and the options for removing workers exposed to these agents from hazardous work environments. Our aim is to investigate the health effects of chemical agents on humans and the possibilities of their induction in order to reduce or provide optimal conditions for safe and healthy working. During the study, particular attention was paid to the investigation of substitutes and the possibility of automation.},
	year = {2023},
	eissn = {2786-1465},
	pages = {389-397},
	orcid-numbers = {Zákányiné Mészáros, Renáta/0000-0001-9073-7599; Zákányi, Balázs Zsolt/0000-0003-1848-2688}
}