@mastersthesis{MTMT:33704885,
	title = {Ti-TiB2-TiB nanokompozitok fejlesztése},
	url = {https://m2.mtmt.hu/api/publication/33704885},
	author = {Angel, Dávid Ádám},
	doi = {10.14750/ME.2022.019},
	unique-id = {33704885},
	year = {2022}
}

@article{MTMT:32601116,
	title = {Development of TiB and nanocrystalline Ti-reinforced novel hybrid Ti nanocomposite produced by powder metallurgy},
	url = {https://m2.mtmt.hu/api/publication/32601116},
	author = {Angel, Dávid Ádám and Mikó, Tamás and Kristály, Ferenc and Benke, Márton and Gácsi, Zoltán},
	doi = {10.1007/s10853-021-06833-x},
	journal-iso = {J MATER SCI},
	journal = {JOURNAL OF MATERIALS SCIENCE},
	volume = {57},
	unique-id = {32601116},
	issn = {0022-2461},
	year = {2022},
	eissn = {1573-4803},
	pages = {4130-4144},
	orcid-numbers = {Kristály, Ferenc/0000-0002-0075-5994}
}

@article{MTMT:32475922,
	title = {Complex Avrami kinetics of TiB2 transformation into TiB whiskers during sintering of Ti-TiB2 nanocomposites},
	url = {https://m2.mtmt.hu/api/publication/32475922},
	author = {Angel, Dávid Ádám and Mikó, Tamás and Kristály, Ferenc and Benke, Márton and Gácsi, Zoltán and Kaptay, György},
	doi = {10.1016/j.jallcom.2021.162442},
	journal-iso = {J ALLOY COMPD},
	journal = {JOURNAL OF ALLOYS AND COMPOUNDS},
	volume = {894},
	unique-id = {32475922},
	issn = {0925-8388},
	abstract = {The kinetics of transformation of 5 w% TiB2 nano-particles (50 nm diameter) dispersed and pressed (1.5 GPa) in the of Ti matrix (150 µm diameter) into TiB nano-whiskers was studied as a function of temperature (800–900–1000 °C) and time (5–720 min) in 25 experiments in total, by vacuum sintering. The classical one-step Avrami kinetics does not properly describe this transformation due to the formation of oxide inhibitors from contaminants. However, the same results could be perfectly described by a complex Avrami kinetics supposing two parallel steps of transformations: i). fast transformation along the initially metallic Ti/TiB2 interface and ii). delayed transformation along contaminated Ti/TiB2 interface. Data for kinetic calculation was obtained by X-ray diffraction and Rietveld refinement on the sintered samples. Extrapolating the experimental results by the complex Avrami model beyond the measured temperature interval it was found that at and above about 1050 °C, the second step is missing due to the fast dissolution of oxide films in the beta-Ti matrix, leading to very fast kinetics.},
	keywords = {Transformation kinetics; TiB in Ti matrix; TiB whiskers; complex Avrami kinetics},
	year = {2022},
	eissn = {1873-4669},
	orcid-numbers = {Kristály, Ferenc/0000-0002-0075-5994; Kaptay, György/0000-0003-4419-142X}
}

@article{MTMT:31897150,
	title = {A szinterelő közegek hatása a porkohászati úton előállított Ti-TiB2 kompozitok mechanikai tulajdonságára},
	url = {https://m2.mtmt.hu/api/publication/31897150},
	author = {Angel, Dávid Ádám and Mikó, Tamás and Benke, Márton and Gácsi, Zoltán},
	journal-iso = {ANYAGOK VILÁGA},
	journal = {ANYAGOK VILÁGA},
	volume = {16},
	unique-id = {31897150},
	issn = {1586-0140},
	year = {2021},
	pages = {x}
}

@article{MTMT:31364170,
	title = {Characterization of ceramic particle reinforced titanium composite produced via powder metallurgy},
	url = {https://m2.mtmt.hu/api/publication/31364170},
	author = {Angel, Dávid Ádám and Mikó, Tamás and Benke, Márton and Gácsi, Zoltán},
	doi = {10.24425/amm.2020.132788},
	journal-iso = {ARCH METALL MATER},
	journal = {ARCHIVES OF METALLURGY AND MATERIALS},
	volume = {65},
	unique-id = {31364170},
	issn = {1733-3490},
	year = {2020},
	eissn = {2300-1909},
	pages = {515-519}
}

@misc{MTMT:30755305,
	title = {Nanoszerkezetű titán kompozitok előállítása és vizsgálata},
	url = {https://m2.mtmt.hu/api/publication/30755305},
	author = {Kaufmann, Szabolcs},
	editor = {Mikó, Tamás and Angel, Dávid Ádám},
	unique-id = {30755305},
	abstract = {A kompozitok létrehozása során a célunk, hogy a mátrix valamely tulajdonságát javítsuk a hozzá kevert erősítő fázis segítségével. Munkám során porkohászati módszer alkalmazásával, az ötvözetlen titán szilárdságának növelésével foglalkoztam. A 99,4% tisztaságú 163-213 nm közötti szemcséket tartalmazó kiinduló porhoz (mátrix) különböző mennyiségben (5, 10, 15 és 20 m/m%) kevertem 3-5 nm-es szemcseméret tartományú őrölt titán port. Az így létrehozott keverékekből szobahőmérsékleten különböző présnyomás (600, 800, 1000 és 1200 MPa) alkalmazásával készítettem hengeres geometriájú próbatesteket. A hidegen préselt darabokat ezt követően 1000 °C-on szintereltem. Kutatásom során két különböző szinterelési technológiát, a hosszú idejű (összesen 5 órás) külső nyomás nélkülit, és a rövid idejű (összesen 10 percig tartó) külső nyomás alattit (50MPa) hasonlítottam össze. Munkám célja leírni, hogy az őrölt titánpor mennyisége, a hidegpréselés mértéke, illetve a két eltérő szinterelési eljárás hogyan befolyásolja a nanoszemcsés őrölt titánnal erősített őröletlen titán mátrixú kompozit szilárdságát és sűrűségét. Az elvégzett kutatómunkám rövid összefoglalását az 1. ábrán mutatom be.},
	year = {2019}
}

@misc{MTMT:30655456,
	title = {Production and characterization of titanium matrix nanocomposites reinforced with nano-ceramic particles},
	url = {https://m2.mtmt.hu/api/publication/30655456},
	author = {Angel, Dávid Ádám and Benke, Márton and Gácsi, Zoltán},
	unique-id = {30655456},
	year = {2019}
}

@CONFERENCE{MTMT:30706474,
	title = {The Effect of the Mechanical Alloying on Rutile Reinforced Titanium Powder by High Energy Ball Milling},
	url = {https://m2.mtmt.hu/api/publication/30706474},
	author = {Angel, Dávid Ádám and Benke, Márton and Mikó, Tamás and Gácsi, Zoltán},
	booktitle = {2018 World Congress on Powder Metallurgy, Congress Proceedings},
	unique-id = {30706474},
	year = {2018},
	pages = {114-117}
}

@article{MTMT:30545640,
	title = {Characterization of grain structure and crystallographic texture variation during the production of a Properzi semi-product},
	url = {https://m2.mtmt.hu/api/publication/30545640},
	author = {Angel, Dávid Ádám and Hlavács, Adrienn and Pethő, Dániel and Mertinger, Valéria and Barkóczy, Péter and Benke, Márton},
	doi = {10.1088/1757-899x/426/1/012001},
	journal-iso = {IOP CONF SER MATER SCI ENG},
	journal = {IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING},
	volume = {426},
	unique-id = {30545640},
	issn = {1757-8981},
	abstract = {The solidification on the casting wheel is the first step of the Properzi process which is followed by rolling in several steps, in this case 11 rolling steps. The uniqueness of the technology is that the rolling occurs from 3 directions. Therefore, a completely unique texture develops in the product compared to classic rolling. This aluminium semi-product is the base product for wire drawing. The characteristic of the strand greatly influences the success of the wire drawing therefore, knowing the crystallographic texture is demanded. In this paper, the grain structure and crystallographic texture variation during the full production technology of a Properzi semi-product is characterised. The examined strand includes all the technological steps of the process (casting and the 11 rolling steps). To perform such investigation, strand the complete production must be stopped for sampling because of the closed and semi-continuous type of the process, Therefore, the presented work is unique. To characterize the semi-product, cross-sectional and longitudinal-sectional samples were prepared. Grain structure and X-ray diffraction (XRD) texture examinations were carried out on the two sample series. Based on the results it can be stated, that despite of the grain refinement, initially a columnar structure formed and a strong texture developed. During rolling, the fibre texture developed. After the last step, the initial texture is still present besides the fibre texture. Consequently, the initial conditions of the crystallization highly determine the developed texture of the semi-product.},
	year = {2018},
	eissn = {1757-899X},
	orcid-numbers = {Mertinger, Valéria/0000-0002-5951-0801; Barkóczy, Péter/0000-0003-1868-3463}
}

@inproceedings{MTMT:30449715,
	title = {The Effect of the Pressing on Rutile Reinforced Titanium},
	url = {https://m2.mtmt.hu/api/publication/30449715},
	author = {Angel, Dávid Ádám and Benke, Márton and Mikó, Tamás and Gácsi, Zoltán},
	booktitle = {Euro PM2018 Congress Proceedings},
	unique-id = {30449715},
	year = {2018},
	pages = {1-5}
}