https://m2.mtmt.hu/ hun 2026-05-01 01:05 JournalArticle 36297148 VALIDATED true Funding Agency and Grant Number: Janos Bolyai Research Scholarship of the Hungarian Academy of Sciences [BO/00508/22/6]; Doctoral Excellence Fellowship Programme (DCEP) - National Research Development and Innovation Fund of the Ministry of Culture and Innovation; Budapest University of Technology and Economics, under a grant agreement with the National Research, Development and Innovation Office; Ministry of Culture and Innovation of Hungary from the National Research, Development and Innovation Fund [EKOP-24-4-II-BME- 157, EKOP-24-3-BME-383] Funding text: This research was partly supported by the Janos Bolyai Research Scholarship of the Hungarian Academy of Sciences No. BO/00508/22/6 and supported by the Doctoral Excellence Fellowship Programme (DCEP) is funded by the National Research Development and Innovation Fund of the Ministry of Culture and Innovation and the Budapest University of Technology and Economics, under a grant agreement with the National Research, Development and Innovation Office. The project has been partly implemented with the support provided by the Ministry of Culture and Innovation of Hungary from the National Research, Development and Innovation Fund, financed under the EKOP-24-4-II-BME- 157 and EKOP-24-3-BME-383 funding scheme. The authors acknowledge the support of Norbert Ibriksz, Gyorgy Poka, Daniel Istvan Poor and Csongor Pereszlai in the experimental work. 0 false 2026-04-27T07:45:22.564+0000 2025-12-27T18:08:33.012+0000 2025-08-23T19:56:36.804+0000 true 10056359 Geier Norbert /api/author/10056359 Author Geier Norbert (Gyártástechnológia) true 10056359 2026-01-01T21:24:37.349+0000 2025-09-19T06:54:03.343+0000 true 10072271 Andódy Katalin /api/admin/10072271 Admin Andódy Katalin (BME admin4) true 2025-12-27T18:08:32.999+0000 true 521 Szuper Admin /api/admin/521 Admin Szuper Admin (admin) true true false true 24 24 /api/publicationtype/24 PublicationType Folyóiratcikk 1 true 24 JournalArticle true 10000059 Article true 24 24 /api/publicationtype/24 PublicationType Folyóiratcikk 1 true 24 JournalArticle /api/subtype/10000059 Szakcikk SubType Szakcikk (Folyóiratcikk) 101 true 10000059 true 1 /api/category/1 Category Tudományos true 1 Geier, Norbert true true /api/journal/20079806 REVIEWED COMPOSITES PART C: OPEN ACCESS 2666-6820 2666-6820 true false false 20079806 true 2666-6820 2666-6820 Journal FOREIGN 18 100640 100640 11 2025 Machining-induced burr formation in carbon fibre-reinforced polymer (CFRP) composites is difficult to predict and control, mainly due to the anisotropy and inhomogeneity of the fibrous composite, as well as the rapid tool condition change due to the abrasive tool wear. The main aim of this study is to develop a model to determine the density and distribution functions of risky fibre cutting angles where machining-induced burrs are expected to be formed when hole-machining CFRPs. Four models were introduced, and their adequacy was analysed. The coefficients of the models were determined using datasets of three previous research projects (i.e., 2 380 808 data points) and validated through a fourth one (208 571 data points) where hole machining experiments were carried out using different tools, parameters and setups. The normality of the risky fibre cutting angles was tested through the Shapiro-Wilk and Kolmogorov-Smirnov statistical tests, and the distribution was found to be not Gaussian. The developed trigonometric model shows a good fit to the data points, i.e., the determination coefficient is at least 0.949 for each dataset. The results indicate that machining-induced burr formation is most probable at a fibre cutting angle of 118–133°, and 60 % of burr occurrences fall within the 110°–160° range when the critical fibre cutting angle is 133° These findings provide a foundation for the industrial adoption of advanced machining strategies for fibrous polymer composites, enabling a significant reduction of machining‑induced burrs in CFRPs. true true NATIONAL 2025 true true true false true false GOLD 2026-04-27 true https://doi.org/10.1016/j.jcomc.2025.100640 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 10 10 Q1 false false false false 2025-09-18T06:54:03.047+0000 Gyártástudomány és -technológia Tanszék (BME / GPK) 2 5 1 2 0 true Language 10002 /api/language/10002 Angol Angol English true 2 true PersonAuthorship 127580697 /api/authorship/127580697 Geier, Norbert ✉ [Geier, Norbert (Gyártástechnológia), szerző] Gyártástudomány és -technológia Tanszék (BME / GPK) 1 0.5 true false true Author 10056359 /api/author/10056359 Geier Norbert (Gyártástechnológia) Geier Norbert true 10056359 true Geier Norbert true false false AuthorshipType 1 /api/authorshiptype/1 Szerző 0 true 0 true false true PersonAuthorship 127580698 /api/authorship/127580698 Magyar, Gergely [Magyar, Gergely (Gyártástechnológia), szerző] Gyártástudomány és -technológia Tanszék (BME / GPK) 2 0.5 false true false Author 10082692 /api/author/10082692 Magyar Gergely (Gyártástechnológia) Magyar Gergely true true Magyar Gergely true false false AuthorshipType 1 /api/authorshiptype/1 Szerző 0 true 0 true false true PublicationIdentifier 29737058 /api/publicationidentifier/29737058 DOI: 10.1016/j.jcomc.2025.100640 PlainSource 6 /api/publicationsource/6 DOI PublicationSourceType 10001 /api/publicationsourcetype/10001 DOI true true true DOI DOI https://doi.org/@@@ true true 6 true GOLD true IDENTICAL 10.1016/j.jcomc.2025.100640 https://doi.org/10.1016/j.jcomc.2025.100640 false true PublicationIdentifier 29737059 /api/publicationidentifier/29737059 Kiadónál: https://linkinghub.elsevier.com/retrieve/pii/S2666682025000830 PlainSource 141 /api/publicationsource/141 Kiadónál PublicationSourceType 10006 /api/publicationsourcetype/10006 Link true true true Kiadónál At publisher @@@ true true 141 true https://linkinghub.elsevier.com/retrieve/pii/S2666682025000830 https://linkinghub.elsevier.com/retrieve/pii/S2666682025000830 false true PublicationIdentifier 29834303 /api/publicationidentifier/29834303 WoS: 001561079100001 PlainSource 1 /api/publicationsource/1 WoS PublicationSourceType 10003 /api/publicationsourcetype/10003 Indexelő adatbázis false true true WoS WoS https://www.webofscience.com/wos/woscc/full-record/@@@ true true 1 true IDENTICAL 001561079100001 https://www.webofscience.com/wos/woscc/full-record/001561079100001 false true PublicationIdentifier 29834304 /api/publicationidentifier/29834304 Scopus: 105013984461 PlainSource 3 /api/publicationsource/3 Scopus PublicationSourceType 10003 /api/publicationsourcetype/10003 Indexelő adatbázis false true true Scopus Scopus http://www.scopus.com/record/display.url?origin=inward&eid=2-s2.0-@@@ true true 3 true 105013984461 http://www.scopus.com/record/display.url?origin=inward&eid=2-s2.0-105013984461 false true PublicationIdentifier 29758664 /api/publicationidentifier/29758664 Egyéb URL: https://phd.gpk.bme.hu/pub/s/j/l9/t3?20669436 PlainSource 40 /api/publicationsource/40 Egyéb URL PublicationSourceType 10006 /api/publicationsourcetype/10006 Link true true true Egyéb URL Other URL @@@ true true 40 true https://phd.gpk.bme.hu/pub/s/j/l9/t3?20669436 https://phd.gpk.bme.hu/pub/s/j/l9/t3?20669436 false true PublicationIdentifier 29938085 /api/publicationidentifier/29938085 Egyéb URL: https://linkinghub.elsevier.com/retrieve/pii/S2666682025000830 PlainSource 40 /api/publicationsource/40 Egyéb URL PublicationSourceType 10006 /api/publicationsourcetype/10006 Link true true true Egyéb URL Other URL @@@ true true 40 true IDENTICAL https://linkinghub.elsevier.com/retrieve/pii/S2666682025000830 https://linkinghub.elsevier.com/retrieve/pii/S2666682025000830 false true Classification 10984 /api/classification/10984 Gépészmérnöki tudományok true true Classification 10807 /api/classification/10807 Műszaki és technológiai tudományok true true Classification 10001 /api/classification/10001 Tudomány true true SjrRating 11564152 /api/sjrrating/11564152 sjr:Q1 (2025) Scopus - Ceramics and Composites COMPOSITES PART C: OPEN ACCESS 2666-6820 2666-6820 18 0.24 journal RatingType 10002 /api/ratingtype/10002 sjr sjr true true ClassificationExternal 2503 /api/classificationexternal/2503 Scopus - Ceramics and Composites true 2503 true Q1 DIRECT true true Reference 67561723 /api/reference/67561723 1. Wang 2024: Dynamic modeling of thin-walled CFRP surface milling and the effect of chatter on surface quality., Int. J. Adv. Manuf. Technol., 132, p. 4765, DOI: 10.1007/s00170-024-13612-w 1 10.1007/s00170-024-13612-w false true Reference 67561724 /api/reference/67561724 2. Czigány 2006: Special manufacturing and characteristics of basalt fiber reinforced hybrid polypropylene composites: mechanical properties and acoustic emission study., Compos. Sci. Technol., 66, p. 3210, DOI: 10.1016/j.compscitech.2005.07.007 2 10.1016/j.compscitech.2005.07.007 false true Reference 67561725 /api/reference/67561725 3. Perner 2016: Avoiding defects in manufacturing processes: a review for automated CFRP production., Robot Comput. Integr. Manuf., 38, p. 82, DOI: 10.1016/j.rcim.2015.10.008 3 10.1016/j.rcim.2015.10.008 false true Reference 67561726 /api/reference/67561726 4. Hintze 2018: Influence of spatial tool inclination on delamination when milling CFRP., J. Mater. Process. Technol., 252, p. 830, DOI: 10.1016/j.jmatprotec.2017.10.041 4 10.1016/j.jmatprotec.2017.10.041 false true Reference 67561727 /api/reference/67561727 5. Khosravani 2017: Experimental investigations of the environmental effects on stability and integrity of composite sandwich T-joints., Materwiss Werksttech, 48, p. 753, DOI: 10.1002/mawe.201600747 5 10.1002/mawe.201600747 false true Reference 67561728 /api/reference/67561728 6. Ahmad 2009: Machining of Polymer Composites 6 false true Reference 67561729 /api/reference/67561729 7. Xu 2021: Wear behavior of special tools in the drilling of CFRP composite laminates., Wear, 476, DOI: 10.1016/j.wear.2021.203738 7 10.1016/j.wear.2021.203738 false true Reference 67561730 /api/reference/67561730 8. Xu 2017: Wear characteristics of polycrystalline diamond tools in orthogonal cutting of CFRP/Ti stacks., Wear, 376–377, p. 91, DOI: 10.1016/j.wear.2016.11.038 8 10.1016/j.wear.2016.11.038 false true Reference 67561731 /api/reference/67561731 9. Wang 2020: A mechanistic cutting force model based on ductile and brittle fracture material removal modes for edge surface grinding of CFRP composites using rotary ultrasonic machining., Int. J. Mech. Sci., 176, DOI: 10.1016/j.ijmecsci.2020.105551 9 10.1016/j.ijmecsci.2020.105551 false true Reference 67561732 /api/reference/67561732 10. Geng 2019: Delamination formation, evaluation and suppression during drilling of composite laminates: a review., Compos. Struct., 216, p. 168, DOI: 10.1016/j.compstruct.2019.02.099 10 10.1016/j.compstruct.2019.02.099 false true Reference 67561733 /api/reference/67561733 11. Geier 2019: Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: a review., Compos. Part A: Appl. Sci. Manuf., 125, DOI: 10.1016/j.compositesa.2019.105552 11 10.1016/j.compositesa.2019.105552 false true Reference 67561734 /api/reference/67561734 12. Aurich 2009: Burrs—Analysis, control and removal., CIRP Ann., 58, p. 519, DOI: 10.1016/j.cirp.2009.09.004 12 10.1016/j.cirp.2009.09.004 false true Reference 67561735 /api/reference/67561735 13. Ashworth 2019: Effects of machine stiffness and cutting tool design on the surface quality and flexural strength of edge trimmed carbon fibre reinforced polymers., Compos. Part A: Appl. Sci. Manuf., 119, p. 88, DOI: 10.1016/j.compositesa.2019.01.019 13 10.1016/j.compositesa.2019.01.019 false true Reference 67561736 /api/reference/67561736 14. Geier 2020: Analysis of characteristics of surface roughness of machined CFRP composites., Period. Polytech., 64, p. 67, DOI: 10.3311/PPme.14436 14 10.3311/PPme.14436 false true Reference 67561737 /api/reference/67561737 15. Abdelhafeez Hassan 2020: An analytical model to predict interlayer burr size following drilling of CFRP-metallic stack assemblies., CIRP Ann., 69, p. 109, DOI: 10.1016/j.cirp.2020.04.038 15 10.1016/j.cirp.2020.04.038 false true Reference 67561738 /api/reference/67561738 16. Zhang 2021: Novel fiber fracture criteria for revealing forming mechanisms of burrs and cracking at hole-exit in drilling Carbon Fiber Reinforced Plastic., J. Mater. Process. Technol., 289, DOI: 10.1016/j.jmatprotec.2020.116934 16 10.1016/j.jmatprotec.2020.116934 false true Reference 67561739 /api/reference/67561739 17. Li 2018: Study on burr occurrence and surface integrity during slot milling of multidirectional and plain woven CFRPs., Int. J. Adv. Manuf. Technol., 97, p. 163, DOI: 10.1007/s00170-018-1937-6 17 10.1007/s00170-018-1937-6 false true Reference 67561740 /api/reference/67561740 18. Geier 2018: Analysis of thrust force and characteristics of uncut fibres at non-conventional oriented drilling of unidirectional carbon fibre-reinforced plastic (UD-CFRP) composite laminates., Int. J. Adv. Manuf. Technol., 100, p. 3139, DOI: 10.1007/s00170-018-2895-8 18 10.1007/s00170-018-2895-8 false true Reference 67561741 /api/reference/67561741 19. Su 2018: Analytical cutting model for a single fiber to investigate the occurrences of the surface damages in milling of CFRP., Int. J. Adv. Manuf. Technol., 96, p. 2671, DOI: 10.1007/s00170-018-1797-0 19 10.1007/s00170-018-1797-0 false true Reference 67561742 /api/reference/67561742 20. Jaiswal 2022: Experimental and analytical examination of multidirectional carbon fiber–reinforced polymers for uncut fibers and their distributions during drilling., Int. J. Adv. Manuf. Technol., 123, p. 1323, DOI: 10.1007/s00170-022-10215-1 20 10.1007/s00170-022-10215-1 false true Reference 67561743 /api/reference/67561743 21. Su 2020: Morphological characteristics and formation mechanisms of the UD-CFRP drill exit-damages., Int. J. Adv. Manuf. Technol., 107, p. 2363, DOI: 10.1007/s00170-020-05186-0 21 10.1007/s00170-020-05186-0 false true Reference 67561744 /api/reference/67561744 22. Shinde 2022: Numerical modelling of drilling of fiber reinforced polymer matrix composite: a review., J. Mater. Res. Technol., 20, p. 3561, DOI: 10.1016/j.jmrt.2022.08.063 22 10.1016/j.jmrt.2022.08.063 false true Reference 67561745 /api/reference/67561745 23. Bi 2025: Numerical investigation of the impact of processing conditions on burr formation in Carbon Fiber-Reinforced Plastic (CFRP) drilling with multiscale modeling., Mater. (Basel), 18, p. 1244, DOI: 10.3390/ma18061244 23 10.3390/ma18061244 false true Reference 67561746 /api/reference/67561746 24. Hrechuk 2018: Hole-quality evaluation in drilling fiber-reinforced composites., Compos. Struct., 204, p. 378, DOI: 10.1016/j.compstruct.2018.07.105 24 10.1016/j.compstruct.2018.07.105 false true Reference 67561747 /api/reference/67561747 25. Xu 2014: A comparative evaluation of polycrystalline diamond drills in drilling high-strength T800S/250F CFRP., Compos. Struct., 117, p. 71, DOI: 10.1016/j.compstruct.2014.06.034 25 10.1016/j.compstruct.2014.06.034 false true Reference 67561748 /api/reference/67561748 26. Xu 2018: Study of drilling-induced defects for CFRP composites using new criteria., Compos. Struct., 201, p. 1076, DOI: 10.1016/j.compstruct.2018.06.051 26 10.1016/j.compstruct.2018.06.051 false true Reference 67561749 /api/reference/67561749 27. Jia 2020: An investigation of the effects of step drill geometry on drilling induced delamination and burr of Ti/CFRP stacks., Compos. Struct., 235, DOI: 10.1016/j.compstruct.2019.111786 27 10.1016/j.compstruct.2019.111786 false true Reference 67561750 /api/reference/67561750 28. Geier 2018: Direct monitoring of hole damage in carbon fibre-reinforced polymer (CFRP) composites., IOP Conf. Ser.: Mater. Sci. Eng., 448, DOI: 10.1088/1757-899X/448/1/012003 28 10.1088/1757-899X/448/1/012003 false true Reference 67561751 /api/reference/67561751 29. Geier 2019: Monitoring of orbital drilling process in CFRP based on digital image processing of characteristics of uncut fibres., Procedia CIRP, 85, p. 16, DOI: 10.1016/j.procir.2019.09.011 29 10.1016/j.procir.2019.09.011 false true Reference 67561752 /api/reference/67561752 30. Ibriksz 2018: Analysis of uncut fibres at machined holes in carbon fibre-reinforced plastics (CFRP) using digital image processing., Bánki Rep., 1, p. 11 30 false true Reference 67561753 /api/reference/67561753 31. Magyar 2022: Analysis of drilling-induced geometrical damages in basalt and carbon fibre-reinforced polymer (BFRP and CFRP) composites., Int. J. Adv. Manuf. Technol., DOI: 10.1007/s00170-022-10173-8 31 10.1007/s00170-022-10173-8 false true Reference 67561754 /api/reference/67561754 32. István Poór 2021: A critical review of the drilling of CFRP composites: burr formation, characterisation and challenges., Compos. B: Eng. 32 false true Reference 67561755 /api/reference/67561755 33. Geier 2022: A method to predict drilling-induced burr occurrence in chopped carbon fibre reinforced polymer (CFRP) composites based on digital image processing., Compos. B: Eng., 242, DOI: 10.1016/j.compositesb.2022.110054 33 10.1016/j.compositesb.2022.110054 false true Reference 67561756 /api/reference/67561756 34. Lissek 2016: Damage quantification for the machining of CFRP: an introduction about characteristic values considering shape and orientation of drilling-induced delamination., Procedia Eng., 149, p. 2, DOI: 10.1016/j.proeng.2016.06.632 34 10.1016/j.proeng.2016.06.632 false true Reference 67561757 /api/reference/67561757 35. Perfortek Kft. n.d. https://www.perfortek.hu (accessed August 21, 2025). 35 false true Reference 67561758 /api/reference/67561758 36. SD205A-11.138-53-12R1-C1 | Secotools.com n.d. https://www.secotools.com (accessed August 21, 2025). 36 false true Reference 67561759 /api/reference/67561759 37. Otsu 1979: A threshold selection method from gray-level histograms., IEEE Trans. Syst. Man. Cybern., 9, p. 62, DOI: 10.1109/TSMC.1979.4310076 37 10.1109/TSMC.1979.4310076 false true Reference 67561760 /api/reference/67561760 38. Magyar 2023: Analysis and modelling of thrust force in drilling of basalt and carbon fibre-reinforced polymer (BFRP and CFRP) composites., J. Braz. Soc. Mech. Sci. Eng., 45, p. 323, DOI: 10.1007/s40430-023-04241-7 38 10.1007/s40430-023-04241-7 false true Reference 67561761 /api/reference/67561761 39. Wang 2017: Effects of cutting edge radius and fiber cutting angle on the cutting-induced surface damage in machining of unidirectional CFRP composite laminates., Int. J. Adv. Manuf. Technol., 91, p. 3107, DOI: 10.1007/s00170-017-0023-9 39 10.1007/s00170-017-0023-9 false true /api/publication/36297148 Geier Norbert et al. Machining-induced burr distribution along hole contours in unidirectional carbon fibre-reinforced polymer (UD-CFRP) composites. (2025) COMPOSITES PART C: OPEN ACCESS 2666-6820 2666-6820 18<div class="JournalArticle Publication long-list"> <div class="authors"> <img title="Forrásközlemény" style="float: left" src="/frontend/resources/grid/publication-core-icon.png"> <img title="Idézőközlemény" style="float: left" src="/frontend/resources/grid/publication-citation-icon.png"> <div class="autype autype0"> <span class="author-name" mtid="10056359"><a href="/gui2/?type=authors&mode=browse&sel=10056359" target="_blank">Geier Norbert ✉ (<span class="authorship-author-name">Geier Norbert</span> <span class="authorAux-mtmt"> Gyártástechnológia</span>) </a> </span> <span class="author-affil"><span title="Budapesti Műszaki és Gazdaságtudományi Egyetem">BME</span>/<span title="Gépészmérnöki Kar">GPK</span>/Gyártástudomány és -technológia Tanszék</span> ;&nbsp;&nbsp;&nbsp; <span class="author-name" mtid="10082692"><a href="/gui2/?type=authors&mode=browse&sel=10082692" target="_blank">Magyar Gergely (<span class="authorship-author-name">Magyar Gergely</span> <span class="authorAux-mtmt"> Gyártástechnológia</span>) </a> </span> <span class="author-affil"><span title="Budapesti Műszaki és Gazdaságtudományi Egyetem">BME</span>/<span title="Gépészmérnöki Kar">GPK</span>/Gyártástudomány és -technológia Tanszék</span> </div> </div> <div class="title"><a href="/gui2/?mode=browse&params=publication;36297148" target="_blank">Machining-induced burr distribution along hole contours in unidirectional carbon fibre-reinforced polymer (UD-CFRP) composites</a></div> <div> <span class="journal-title">COMPOSITES PART C: OPEN ACCESS</span> <span class="journal-issn">(<a target="_blank" href="https://portal.issn.org/resource/ISSN/2666-6820">2666-6820</a> <a target="_blank" href="https://portal.issn.org/resource/ISSN/2666-6820">2666-6820</a>)</span>: <span class="journal-volume">18</span> <span class="page"> Paper 100640. 11 p. </span> <span class="year">(2025)</span> </div> <div class="pub-footer"> <span class="language" xmlns="http://www.w3.org/1999/html">Nyelv: Angol | </span> <span class="identifiers"> <span class="id identifier oa_GOLD" title=" Gold "> <a style="color:blue" title="10.1016/j.jcomc.2025.100640" target="_blank" href="https://doi.org/10.1016/j.jcomc.2025.100640"> DOI </a> </span> <span class="id identifier oa_none" title="none"> <a style="color:black" title="https://linkinghub.elsevier.com/retrieve/pii/S2666682025000830" target="_blank" href="https://linkinghub.elsevier.com/retrieve/pii/S2666682025000830"> Kiadónál </a> </span> <span class="id identifier oa_none" title="none"> <a style="color:blue" title="001561079100001" target="_blank" href="https://www.webofscience.com/wos/woscc/full-record/001561079100001"> WoS </a> </span> <span class="id identifier oa_none" title="none"> <a style="color:black" title="105013984461" target="_blank" href="http://www.scopus.com/record/display.url?origin=inward&eid=2-s2.0-105013984461"> Scopus </a> </span> <span class="id identifier oa_none" title="none"> <a style="color:black" title="https://phd.gpk.bme.hu/pub/s/j/l9/t3?20669436" target="_blank" href="https://phd.gpk.bme.hu/pub/s/j/l9/t3?20669436"> Egyéb URL </a> </span> <span class="id identifier oa_none" title="none"> <a style="color:blue" title="https://linkinghub.elsevier.com/retrieve/pii/S2666682025000830" target="_blank" href="https://linkinghub.elsevier.com/retrieve/pii/S2666682025000830"> Egyéb URL </a> </span> </span> <OnlyViewableByAuthor><div class="ratings"> <div class="journal-subject">Folyóirat szakterülete: Scopus - Ceramics and Composites&nbsp;&nbsp;&nbsp;SJR indikátor:&nbsp;Q1</div> <div class="journal-subject">Folyóirat szakterülete: Scopus - Mechanical Engineering&nbsp;&nbsp;&nbsp;SJR indikátor:&nbsp;Q1</div> <div class="journal-subject">Folyóirat szakterülete: Scopus - Mechanics of Materials&nbsp;&nbsp;&nbsp;SJR indikátor:&nbsp;Q1</div> </div></OnlyViewableByAuthor> <div class="publication-citation"> <a target="_blank" href="/api/publication?cond=citations.related;eq;36297148&sort=publishedYear,desc&sort=title"> Idézett közlemények száma: 10 </a> </div> <div class="mtid"><span class="long-pub-mtid">Közlemény: 36297148</span> | <span class="status-data status-VALIDATED"> Egyeztetett </span> Forrás Idéző | <span class="type-subtype">Folyóiratcikk ( Szakcikk ) </span> | <span class="pub-category">Tudományos</span> | <span class="publication-sourceOfData">WOS TAGGED</span> </div> <div class="lastModified">Utolsó módosítás: 2025.12.27. 19:08 Szuper Admin (admin) </div> <pre class="comment" style="margin-top: 0; margin-bottom: 0;"><u>Megjegyzés</u>: Funding Agency and Grant Number: Janos Bolyai Research Scholarship of the Hungarian Academy of Sciences [BO/00508/22/6]; Doctoral Excellence Fellowship Programme (DCEP) - National Research Development and Innovation Fund of the Ministry of Culture and Innovation; Budapest University of Technology and Economics, under a grant agreement with the National Research, Development and Innovation Offic...</pre> </div></div>