https://m2.mtmt.hu/ hun 2026-10-25 18:08 JournalArticle 36144057 VALIDATED true 0 false 2026-06-08T12:46:45.760+0000 2026-02-23T14:35:28.844+0000 2025-05-15T15:08:13.099+0000 true 10047029 Lendvai László /api/author/10047029 Author Lendvai László (Polimer anyagtudomány) true 10047029 2026-02-23T14:35:29.141+0000 2026-02-23T14:35:29.141+0000 2025-05-26T08:19:09.913+0000 true 10060511 Zsömle Viktor /api/admin/10060511 Admin Zsömle Viktor (SZE 4 admin) true 10060511 true false true 24 24 /api/publicationtype/24 PublicationType Folyóiratcikk 1 true 24 JournalArticle true 10000059 Article true 24 24 /api/publicationtype/24 PublicationType Folyóiratcikk 1 true 24 JournalArticle /api/subtype/10000059 Szakcikk SubType Szakcikk (Folyóiratcikk) 101 true 10000059 true 1 /api/category/1 Category Tudományos true 1 Lendvai, László true true /api/journal/20081006 REVIEWED EMERGENT MATERIALS 2522-5731 2522-574X true false false 20081006 true 2522-5731 2522-574X Journal FOREIGN 8 8 6791 6806 6791 16 2025 This study investigates the effect of filament moisture content on material extrusion (MEX) 3D-printed composites using acrylonitrile butadiene styrene (ABS) as the polymer matrix and 0–10 vol% hexagonal boron nitride (BN) as reinforcement. ABS/BN composites were prepared through batchwise compounding and extruded into MEX-suitable filaments. The filaments were conditioned at 30 °C and 10% or 90% relative humidity (RH) before/during direct feeding into the 3D printer. Specimens were fabricated with raster angles parallel (0°) and perpendicular (90°) to their length. Micro- and macrostructural analyses using scanning electron microscopy and computed tomography revealed intensive void formation, especially in BN-filled composites 3D-printed from humid filaments. This was attributed to BN acting as a physical barrier, hindering the outgassing of evaporated water during 3D printing. Mechanical properties were evaluated using tensile and Charpy impact tests. Based on the tensile test results, neat ABS was the least sensitive to filament moisture, with tensile strength at 0° raster angle dropping from 40.5 MPa to 36.7 MPa as storage RH was increased from 10 to 90%. For composites with 10 vol% BN loading, tensile strength dropped from 34.1 MPa to 22.3 MPa. Charpy impact strength exhibited similar reductions, ascribed to the porous structure of the BN-filled composites caused by the evaporated moisture. Thermal conductivity was also examined, showing slightly superior performance for samples 3D-printed from filaments stored in less humid conditions. For unfilled ABS, the conductivity slightly decreased from 0.188 to 0.185 W/mK, while for 10 vol% BN-filled composite, it dropped from 0.778 to 0.617 W/mK. Funding 2052940 /api/funding/2052940 (Bolyai János Kutatói Ösztöndíj) Támogató: MTA false true Funding 2052941 /api/funding/2052941 (TKP2021-NVA-23) false true Funding 2052942 /api/funding/2052942 (ÚNKP-23-5-SZE-112) Támogató: NKFIH false true true 2025 true true true false false false GOLD 2026-06-08 true https://doi.org/10.1007/s42247-025-01108-6 5 0 5 3 3 5 5 4 4 5 5 3 3 3 2 0 5 3 5 3 0 7 7 Folyóiratcikk Journal Article 24 5 Könyvrészlet Chapter in Book 25 0 Könyv Book 23 0 Egyéb konferenciaközlemény Conference paper 31 0 Egyéb konferenciakötet Conference proceedings 32 0 Oltalmi formák Protection forms 26 0 Disszertáció Thesis 28 0 Egyéb Miscellaneous 29 0 Alkotás Achievement 22 0 Kutatási adat Research data 33 0 Folyóiratcikk Journal Article 24 0 0 0 Könyvrészlet Chapter in Book 25 0 0 0 Könyv Book 23 0 0 0 Egyéb konferenciaközlemény Conference paper 31 0 0 0 Egyéb konferenciakötet Conference proceedings 32 0 0 0 Oltalmi formák Protection forms 26 0 0 0 Disszertáció Thesis 28 0 0 0 Egyéb Miscellaneous 29 0 0 0 Alkotás Achievement 22 0 0 0 Kutatási adat Research data 33 0 0 0 2025 0 2 1 2 1 2026 0 3 2 3 2 Q2 false false false false 2025-05-25T08:19:09.517+0000 Anyagtudományi és Technológiai Tanszék (SZE / AHJK) 3 8 1 5 0 true Language 10002 /api/language/10002 Angol Angol English true 2 true PersonAuthorship 126541347 /api/authorship/126541347 Lendvai, László ✉ [Lendvai, László (Polimer anyagtudo...), szerző] Anyagtudományi és Technológiai Tanszék (SZE / AHJK) 1 0.2 true false true Author 10047029 /api/author/10047029 Lendvai László (Polimer anyagtudomány) Lendvai László true 10047029 true Lendvai László true false false AuthorshipType 1 /api/authorshiptype/1 Szerző 0 true 0 true false true PersonAuthorship 126541348 /api/authorship/126541348 Jakab, Sándor Kálmán [Jakab, Sándor Kálmán (Polimertechnológiák), szerző] Anyagtudományi és Technológiai Tanszék (SZE / AHJK) 2 0.2 false false false Author 10088349 /api/author/10088349 Jakab Sándor Kálmán (Polimertechnológiák) Jakab Sándor Kálmán true true Jakab Sándor Kálmán true false false AuthorshipType 1 /api/authorshiptype/1 Szerző 0 true 0 true false true PersonAuthorship 126541349 /api/authorship/126541349 Fekete, Imre [Fekete, Imre (Anyagtudomány), szerző] Anyagtudományi és Technológiai Tanszék (SZE / AHJK) 3 0.2 false false false Author 10055820 /api/author/10055820 Fekete Imre (Anyagtudomány) Fekete Imre true 10055820 true Fekete Imre true false false AuthorshipType 1 /api/authorshiptype/1 Szerző 0 true 0 true false true PersonAuthorship 126541350 /api/authorship/126541350 Rigotti, Daniele 4 0.2 false false false Rigotti Daniele true false false AuthorshipType 1 /api/authorshiptype/1 Szerző 0 true 0 true false true PersonAuthorship 126541351 /api/authorship/126541351 Pegoretti, Alessandro 5 0.2 false true false Pegoretti Alessandro true false false AuthorshipType 1 /api/authorshiptype/1 Szerző 0 true 0 true false true PublicationIdentifier 29374797 /api/publicationidentifier/29374797 DOI: 10.1007/s42247-025-01108-6 PlainSource 6 /api/publicationsource/6 DOI PublicationSourceType 10001 /api/publicationsourcetype/10001 DOI true true true DOI DOI https://doi.org/@@@ true true 6 true GOLD true IDENTICAL 10.1007/s42247-025-01108-6 https://doi.org/10.1007/s42247-025-01108-6 false true PublicationIdentifier 29420652 /api/publicationidentifier/29420652 WoS: 001489035600001 PlainSource 1 /api/publicationsource/1 WoS PublicationSourceType 10003 /api/publicationsourcetype/10003 Indexelő adatbázis false true true WoS WoS https://www.webofscience.com/wos/woscc/full-record/@@@ true true 1 true IDENTICAL 001489035600001 https://www.webofscience.com/wos/woscc/full-record/001489035600001 false true PublicationIdentifier 29858452 /api/publicationidentifier/29858452 REAL: 224468 SwordSource 36 /api/publicationsource/36 REAL PublicationSourceType 10007 /api/publicationsourcetype/10007 Repozitórium true true true REAL REAL https://real.mtak.hu/@@@ true true 36 true GOLD true 224468 https://real.mtak.hu/224468 false true PublicationIdentifier 29418199 /api/publicationidentifier/29418199 Scopus: 105005097240 PlainSource 3 /api/publicationsource/3 Scopus PublicationSourceType 10003 /api/publicationsourcetype/10003 Indexelő adatbázis false true true Scopus Scopus http://www.scopus.com/record/display.url?origin=inward&eid=2-s2.0-@@@ true true 3 true IDENTICAL 105005097240 http://www.scopus.com/record/display.url?origin=inward&eid=2-s2.0-105005097240 false true PublicationIdentifier 29374798 /api/publicationidentifier/29374798 Egyéb URL: https://link.springer.com/10.1007/s42247-025-01108-6 PlainSource 40 /api/publicationsource/40 Egyéb URL PublicationSourceType 10006 /api/publicationsourcetype/10006 Link true true true Egyéb URL Other URL @@@ true true 40 true IDENTICAL https://link.springer.com/10.1007/s42247-025-01108-6 https://link.springer.com/10.1007/s42247-025-01108-6 false true Classification 10807 /api/classification/10807 Műszaki és technológiai tudományok true true SjrRating 11561000 /api/sjrrating/11561000 sjr:Q2 (2025) Scopus - Biomaterials EMERGENT MATERIALS 2522-5731 2522-574X 68 0.49 journal RatingType 10002 /api/ratingtype/10002 sjr sjr true true ClassificationExternal 2502 /api/classificationexternal/2502 Scopus - Biomaterials true 2502 true Q2 DIRECT true true Reference 65839512 /api/reference/65839512 1. A. Glogowsky, M. Korger, M. Rabe, Influence of print settings on conductivity of 3D printed elastomers with carbon-based fillers. Progress Additive Manuf. 9, 791–803 (2024), DOI: 10.1007/s40964-023-00483-y 1 10.1007/s40964-023-00483-y false true Reference 65839513 /api/reference/65839513 2. C. Zhai, J. Wang, Y. Tu, G. Chang, X. Ren, C. Ding, Robust optimization of 3D printing process parameters considering process stability and production efficiency. Additive Manuf. 71, 103588 (2023), DOI: 10.1016/j.addma.2023.103588 2 10.1016/j.addma.2023.103588 false true Reference 65839514 /api/reference/65839514 3. A.A. Desai, S. Dnyandev Patil, P.H. Yadav, A. Kekare, Design, analysis, and development of additive manufacturing by using FDM technique with dual nozzle assembly. Mater. Today: Proc. 77, 619–626 (2023), DOI: 10.1016/j.matpr.2022.11.010 3 10.1016/j.matpr.2022.11.010 false true Reference 65839515 /api/reference/65839515 4. M.-H. Hsueh, C.-J. Lai, S.-H. Wang, Y.-S. Zeng, C.-H. Hsieh, C.-Y. Pan, W.-C. Huang, Effect of printing parameters on the thermal and mechanical properties of 3D-Printed PLA and PETG, using fused deposition modeling. Polym. (Basel). 13, 1758 (2021), DOI: 10.3390/polym13111758 4 10.3390/polym13111758 false true Reference 65839516 /api/reference/65839516 5. M. Daly, M. Tarfaoui, M. Chihi, C. Bouraoui, FDM technology and the effect of printing parameters on the tensile strength of ABS parts. Int. J. Adv. Manuf. Technol. 126, 5307–5323 (2023), DOI: 10.1007/s00170-023-11486-y 5 10.1007/s00170-023-11486-y false true Reference 65839517 /api/reference/65839517 6. M. Kováčová, A. Vykydalová, Z. Špitálský, Polycaprolactone with glass beads for 3D printing filaments. Processes. 11, 395 (2023), DOI: 10.3390/pr11020395 6 10.3390/pr11020395 false true Reference 65839518 /api/reference/65839518 7. N. Vidakis, M. Petousis, E. Velidakis, M. Liebscher, V. Mechtcherine, L. Tzounis, On the strain rate sensitivity of fused filament fabrication (FFF) processed PLA, ABS, PETG, PA6, and PP thermoplastic polymers. Polym. (Basel). 12, 2924 (2020), DOI: 10.3390/polym12122924 7 10.3390/polym12122924 false true Reference 65839519 /api/reference/65839519 8. N. Divakaran, A. Y, A. Mohapatra, S. Mohanty, Material extrusion-based 3D printed capacitor optimization: enhancing performance with ZnO and Cu-CNT reinforced ABS composites. Appl. Mater. Today. 40, 102363 (2024), DOI: 10.1016/j.apmt.2024.102363 8 10.1016/j.apmt.2024.102363 false true Reference 65839520 /api/reference/65839520 9. N. Sabahi, E. Farajzadeh, I. Roohani, C.H. Wang, X. Li, Material extrusion 3D printing of polyether-ether-ketone scaffolds based on triply periodic minimal surface designs: A numerical and experimental investigation. Appl. Mater. Today. 39, 102262 (2024), DOI: 10.1016/j.apmt.2024.102262 9 10.1016/j.apmt.2024.102262 false true Reference 65839521 /api/reference/65839521 10. Y. Guldorum, M.N. Danisik, M.K. Zia, N. Aldemir, S. Ulag, L. Bicer, E. Kaya, A. Sahin, G.B. Tinaz, O. Gunduz, Development of 3D-printed PCL scaffolds enriched with hyaluronic acid and Gallic acid for wound dressing. Emergent Mater (2025), DOI: 10.1007/s42247-025-01043-6 10 10.1007/s42247-025-01043-6 false true Reference 65839522 /api/reference/65839522 11. S. Li, B. Fang, Y. Wang, F. Zou, J. Zhao, H. Zhang, J. Guo, Z. Wang, J. Xu, Three-dimensional printing of Boron nitride platelets/polylactic acid composites: achieving enhanced through plane thermal conductivity and decent mechanical properties. Polym. Compos. 46, 4605–4613 (2025), DOI: 10.1002/pc.29263 11 10.1002/pc.29263 false true Reference 65839523 /api/reference/65839523 12. Z. García-Hernández, O. Molina-Ramírez, J.E. Rivera-Salinas, I. Sifuentes-Nieves, P. González-Morones, Hernández-Hernández, Boron nitride: the key material in polymer composites for electromobility. Polym. Compos. 46, 1976–2029 (2025), DOI: 10.1002/pc.29106 12 10.1002/pc.29106 false true Reference 65839524 /api/reference/65839524 13. M. Hassan, M.A. Gondal, E. Cevik, T.F. Qahtan, A. Bozkurt, M.A. Dastageer, High performance pliable supercapacitor fabricated using activated carbon nanospheres intercalated into Boron nitride nanoplates by pulsed laser ablation technique. Arab. J. Chem. 13, 6696–6707 (2020), DOI: 10.1016/j.arabjc.2020.06.024 13 10.1016/j.arabjc.2020.06.024 false true Reference 65839525 /api/reference/65839525 14. W. Wu, M. Zheng, K. Lu, F. Liu, Y.-H. Song, M. Liu, Z.-M. Dang, Thermally conductive composites based on hexagonal Boron nitride nanosheets for thermal management: fundamentals to applications. Compos. Part A: Appl. Sci. Manufac. 169, 107533 (2023), DOI: 10.1016/j.compositesa.2023.107533 14 10.1016/j.compositesa.2023.107533 false true Reference 65839526 /api/reference/65839526 15. Z. Wang, X. Wang, Z. Zhang, L. Liang, Z. Zhao, J. Shi, Preparation of a 3D BN network structure by a salt-template-assisted method filled with epoxy resin to obtain high thermal conductivity nanocomposites. Polym. Compos. 44, 3610–3621 (2023), DOI: 10.1002/pc.27348 15 10.1002/pc.27348 false true Reference 65839527 /api/reference/65839527 16. Z. Wang, X. Wang, Z. Zhang, L. Liang, Z. Zhao, J. Shi, Highly thermally conductive polymer composite enhanced by constructing a dual thermal conductivity network. Polym. Compos. 44, 5734–5745 (2023), DOI: 10.1002/pc.27522 16 10.1002/pc.27522 false true Reference 65839528 /api/reference/65839528 17. S. Bagatella, A. Cereti, F. Manarini, M. Cavallaro, R. Suriano, M. Levi, Thermally conductive and electrically insulating Polymer-Based composites heat sinks fabricated by fusion deposition modeling. Polym. (Basel). 16, 432 (2024), DOI: 10.3390/polym16030432 17 10.3390/polym16030432 false true Reference 65839529 /api/reference/65839529 18. M. Bragaglia, F.R. Lamastra, P. Russo, L. Vitiello, M. Rinaldi, F. Fabbrocino, F. Nanni, A comparison of thermally conductive polyamide 6-boron nitride composites produced via additive layer manufacturing and compression molding. Polym. Compos. 42, 2751–2765 (2021), DOI: 10.1002/pc.26010 18 10.1002/pc.26010 false true Reference 65839530 /api/reference/65839530 19. X. Wu, W. Liu, F.-. Shi, L. Yang, C. Zhang, Constructing three-dimensional Boron nitride network for highly thermally conductive epoxy resin composites. Polym. Compos. 43, 1711–1717 (2022), DOI: 10.1002/pc.26490 19 10.1002/pc.26490 false true Reference 65839531 /api/reference/65839531 20. A. KarimzadGhavidel, T.T. Opoz, M. Mahdavinia, G. Kiani, M. Moradi, Achieving exceptional mechanical and thermal properties in ABS/MWCNTs nanocomposites with minimal CNT loading via electromechanical dispersion technique. Polymer Composites, n/a 20 false true Reference 65839532 /api/reference/65839532 21. Y. Ouyang, F. Ding, L. Bai, X. Li, G. Hou, J. Fan, F. Yuan, Design of network Al2O3 spheres for significantly enhanced thermal conductivity of polymer composites. Compos. Part A: Appl. Sci. Manufac. 128, 105673 (2020), DOI: 10.1016/j.compositesa.2019.105673 21 10.1016/j.compositesa.2019.105673 false true Reference 65839533 /api/reference/65839533 22. D. Liu, C. Ma, H. Chi, S. Li, P. Zhang, P. Dai, Enhancing thermal conductivity of polyimide composite film by electrostatic self-assembly and two-step synergism of Al2O3 microspheres and BN nanosheets. RSC Adv. 10, 42584–42595 (2020), DOI: 10.1039/D0RA08048A 22 10.1039/D0RA08048A false true Reference 65839534 /api/reference/65839534 23. M.W. Akhtar, J.S. Kim, M.A. Memon, M.Y. Khan, M.M. Baloch, Surface modification of magnesium oxide/epoxy composites with significantly improved mechanical and thermal properties. J. Mater. Sci.: Mater. Electron. 32, 15307–15316 (2021) 23 false true Reference 65839535 /api/reference/65839535 24. A. Khan, M. Puttegowda, P. Jagadeesh, H.M. Marwani, A.M. Asiri, A. Manikandan, A.A. Parwaz Khan, G.M. Ashraf, S.M. Rangappa, S. Siengchin, Review on nitride compounds and its polymer composites: a multifunctional material. J. Mater. Res. Technol. 18, 2175–2193 (2022), DOI: 10.1016/j.jmrt.2022.03.032 24 10.1016/j.jmrt.2022.03.032 false true Reference 65839536 /api/reference/65839536 25. Z. Lule, J. Kim, Thermally conductive and highly rigid polylactic acid (PLA) hybrid composite filled with surface treated alumina/nano-sized aluminum nitride. Compos. Part A: Appl. Sci. Manufac. 124, 105506 (2019), DOI: 10.1016/j.compositesa.2019.105506 25 10.1016/j.compositesa.2019.105506 false true Reference 65839537 /api/reference/65839537 26. G. Wu, Y. Wang, K. Wang, A. Feng, The effect of modified AlN on the thermal conductivity, mechanical and thermal properties of aln/polystyrene composites. RSC Adv. 6, 102542–102548 (2016), DOI: 10.1039/C6RA22794E 26 10.1039/C6RA22794E false true Reference 65839538 /api/reference/65839538 27. M. Qian, P. Song, Z. Qin, S. Yan, L. Zhang, Mechanically robust and abrasion-resistant polymer nanocomposites for potential applications as advanced clearance joints. Compos. Part A: Appl. Sci. Manufac. 126, 105607 (2019), DOI: 10.1016/j.compositesa.2019.105607 27 10.1016/j.compositesa.2019.105607 false true Reference 65839539 /api/reference/65839539 28. D. Shen, M. Wang, Y. Wu, Z. Liu, Y. Cao, T. Wang, X. Wu, Q. Shi, K.W.A. Chee, W. Dai, H. Bai, D. Dai, J. Lyu, N. Jiang, C.-T. Lin, J. Yu, Enhanced thermal conductivity of epoxy composites with core-shell SiC@SiO2 nanowires. High. Voltage. 2, 154–160 (2017), DOI: 10.1049/hve.2017.0041 28 10.1049/hve.2017.0041 false true Reference 65839540 /api/reference/65839540 29. L. Lendvai, T. Singh, D. Rigotti, A. Pegoretti, Thermally conductive and electrically resistive acrylonitrile butadiene styrene (ABS)/boron nitride composites: optimal design using a multi-criteria decision-making approach. J. Mater. Res. Technol. 26, 8776–8788 (2023), DOI: 10.1016/j.jmrt.2023.09.165 29 10.1016/j.jmrt.2023.09.165 false true Reference 65839541 /api/reference/65839541 30. K. Li, Y. Liu, S. Wang, X. Jin, W. Li, W. Gan, S. Song, Construction of 3D framework of BN and silica with advanced thermal conductivity of epoxy composites. J. Polym. Res. 30, 219 (2023), DOI: 10.1007/s10965-023-03589-7 30 10.1007/s10965-023-03589-7 false true Reference 65839542 /api/reference/65839542 31. J. Kovacs, A. Suplicz, Thermally conductive polymer compounds for injection moulding: the synergetic effect of hexagonal boron-nitride and Talc. J. Reinf. Plast. Compos. 32, 1234–1240 (2013), DOI: 10.1177/0731684413489755 31 10.1177/0731684413489755 false true Reference 65839543 /api/reference/65839543 32. F. You, X. Ke, G. Tang, X. Yan, R. Chen, X. Jiang, C. Yao, Enhanced thermal conductivity in Boron nitride incorporated polyethylene/polymethyl methacrylate composites via double percolation structure. Polym. Compos. 45, 4550–4560 (2024), DOI: 10.1002/pc.28080 32 10.1002/pc.28080 false true Reference 65839544 /api/reference/65839544 33. P. Guo, Q. Liu, X. Zhang, J. Liang, Q. Li, K. Zheng, W. Wu, Temperature-sensitive polymer composite-enabled all-printed flexible temperature sensors for safety monitoring. Compos. Part. B: Eng. 300, 112474 (2025), DOI: 10.1016/j.compositesb.2025.112474 33 10.1016/j.compositesb.2025.112474 false true Reference 65839545 /api/reference/65839545 34. S. Gul, S. Arican, M. Cansever, M. Yildiz, B. Saner, Okan, Dimension effect on thermal conductivity of hexagonal Boron nitride/titanium dioxide reinforced hybrid PEEK composites developed with a scalable compounding approach. Polym. Compos. 44, 8669–8682 (2023), DOI: 10.1002/pc.27728 34 10.1002/pc.27728 false true Reference 65839546 /api/reference/65839546 35. M.T. Birosz, M. Andó, Effect of infill pattern scaling on mechanical properties of FDM-printed PLA specimens. Progress Additive Manuf. 9, 875–883 (2024), DOI: 10.1007/s40964-023-00487-8 35 10.1007/s40964-023-00487-8 false true Reference 65839547 /api/reference/65839547 36. D. Croccolo, M. De Agostinis, S. Fini, M. Mele, G. Olmi, G. Campana, Effects of infill temperature on the tensile properties and warping of 3D-printed polylactic acid. Progress Additive Manuf. 9, 919–934 (2024), DOI: 10.1007/s40964-023-00492-x 36 10.1007/s40964-023-00492-x false true Reference 65839548 /api/reference/65839548 37. L. Lendvai, I. Fekete, D. Rigotti, A. Pegoretti, Experimental study on the effect of filament-extrusion rate on the structural, mechanical and thermal properties of material extrusion 3D-printed polylactic acid (PLA) products. Progress Additive Manuf. 10, 619–629 (2025), DOI: 10.1007/s40964-024-00646-5 37 10.1007/s40964-024-00646-5 false true Reference 65839549 /api/reference/65839549 38. M. Srikanth, A.T. Mathew, R.K. Bhagchandani, Model performance evaluation of build time using geometric shape complexity and process parameters in material extrusion. Additive Manuf. 91, 104337 (2024), DOI: 10.1016/j.addma.2024.104337 38 10.1016/j.addma.2024.104337 false true Reference 65839550 /api/reference/65839550 39. A.P. Agrawal, V. Kumar, J. Kumar, P. Paramasivam, S. Dhanasekaran, L. Prasad, An investigation of combined effect of infill pattern, density, and layer thickness on mechanical properties of 3D printed ABS by fused filament fabrication. Heliyon 9, e16531 (2023), DOI: 10.1016/j.heliyon.2023.e16531 39 10.1016/j.heliyon.2023.e16531 false true Reference 65839551 /api/reference/65839551 40. J.M. Chacón, M.A. Caminero, E. García-Plaza, P.J. Núñez, Additive manufacturing of PLA structures using fused deposition modelling: effect of process parameters on mechanical properties and their optimal selection. Mater. Design. 124, 143–157 (2017), DOI: 10.1016/j.matdes.2017.03.065 40 10.1016/j.matdes.2017.03.065 false true Reference 65839552 /api/reference/65839552 41. O. Ulkir, I. Ertugrul, S. Ersoy, B. Yağımlı, The effects of printing temperature on the mechanical properties of 3D-Printed acrylonitrile butadiene styrene. Appl. Sci. 14, 3376 (2024), DOI: 10.3390/app14083376 41 10.3390/app14083376 false true Reference 65839553 /api/reference/65839553 42. L. Fang, Y. Yan, O. Agarwal, S. Yao, J.E. Seppala, S.H. Kang, Effects of environmental temperature and humidity on the geometry and strength of polycarbonate specimens prepared by fused filament fabrication. Materials. 13, 4414 (2020), DOI: 10.3390/ma13194414 42 10.3390/ma13194414 false true Reference 65839554 /api/reference/65839554 43. A. Hamrol, B. Góralski, R. Wichniarek, The influence of moisture absorption and desorption by the ABS filament on the properties of additively manufactured parts using the fused deposition modeling method. Materials. 17, 1988 (2024), DOI: 10.3390/ma17091988 43 10.3390/ma17091988 false true Reference 65839555 /api/reference/65839555 44. S.N.A.M. Halidi, J. Abdullah, Moisture effects on the ABS used for fused deposition modeling rapid prototyping machine. 2012 IEEE symposium on humanities, science and engineering research (2012), pp. 839–843, DOI: 10.1109/SHUSER.2012.6268999 44 10.1109/SHUSER.2012.6268999 false true Reference 65839556 /api/reference/65839556 45. D. Laumann, D. Spiehl, E. Dörsam, Influence of printing material moisture on part adhesion in fused filament fabrication 3D printing. J. Adhes. 100, 380–394 (2024), DOI: 10.1080/00218464.2023.2268531 45 10.1080/00218464.2023.2268531 false true Reference 65839557 /api/reference/65839557 46. R. Wichniarek, A. Hamrol, W. Kuczko, F. Górski, M. Rogalewicz, ABS filament moisture compensation possibilities in the FDM process. CIRP J. Manufact. Sci. Technol. 35, 550–559 (2021), DOI: 10.1016/j.cirpj.2021.08.011 46 10.1016/j.cirpj.2021.08.011 false true Reference 65839558 /api/reference/65839558 47. L. Lendvai, I. Fekete, S.K. Jakab, G. Szarka, K. Verebélyi, B. Iván, Influence of environmental humidity during filament storage on the structural and mechanical properties of material extrusion 3D-printed poly(lactic acid) parts. Results Eng. 103013 (2024), DOI: 10.1016/j.rineng.2024.103013 47 10.1016/j.rineng.2024.103013 false true Reference 65839559 /api/reference/65839559 48. P. Dayalan, P.A. Mahanwar, Effect of nano silica on mechanical and water absorption properties of basalt/polyester hybrid composite with glass/hemp. J. Polym. Res. 30, 341 (2023), DOI: 10.1007/s10965-023-03729-z 48 10.1007/s10965-023-03729-z false true Reference 65839560 /api/reference/65839560 49. H. Alamri, I.M. Low, Effect of water absorption on the mechanical properties of nano-filler reinforced epoxy nanocomposites. Mater. Design. 42, 214–222 (2012), DOI: 10.1016/j.matdes.2012.05.060 49 10.1016/j.matdes.2012.05.060 false true Reference 65839561 /api/reference/65839561 50. S.K. Nayak, A. Satapathy, Development and characterization of polymer-based composites filled with micro-sized waste marble dust. Polym. Polym. Compos. 29, 497–508 (2021) 50 false true Reference 65839562 /api/reference/65839562 51. Y. Tang, J. Xiao, T. Ding, H. Liu, M. Zhang, J. Zhang, Trans-layer and inter-layer fracture behavior of extrusion-based 3D printed concrete under three-point bending. Eng. Fract. Mech. 296, 109836 (2024), DOI: 10.1016/j.engfracmech.2023.109836 51 10.1016/j.engfracmech.2023.109836 false true Reference 65839563 /api/reference/65839563 52. L. Lendvai, F. Ronkay, G. Wang, S. Zhang, S. Guo, V. Ahlawat, T. Singh, Development and characterization of composites produced from recycled polyethylene terephthalate and waste marble dust. Polym. Compos. 43, 3951–3959 (2022), DOI: 10.1002/pc.26669 52 10.1002/pc.26669 false true Reference 65839564 /api/reference/65839564 53. S. Wang, Y. Ma, Z. Deng, S. Zhang, J. Cai, Effects of fused deposition modeling process parameters on tensile, dynamic mechanical properties of 3D printed polylactic acid materials. Polym. Test. 86, 106483 (2020), DOI: 10.1016/j.polymertesting.2020.106483 53 10.1016/j.polymertesting.2020.106483 false true Reference 65839565 /api/reference/65839565 54. O.A. Mohamed, S.H. Masood, J.L. Bhowmik, Characterization and dynamic mechanical analysis of PC-ABS material processed by fused deposition modelling: an investigation through I-optimal response surface methodology. Measurement. 107, 128–141 (2017), DOI: 10.1016/j.measurement.2017.05.019 54 10.1016/j.measurement.2017.05.019 false true Reference 65839566 /api/reference/65839566 55. S.S. Samsudin, M.S. Abdul Majid, M.R. Mohd Jamir, A.F. Osman, M. Jaafar, H.A. Alshahrani, Physical, Thermal Transport, and Compressive Properties of Epoxy Composite Filled with Graphitic- and Ceramic-Based Thermally Conductive Nanofillers. Polymers (Basel) 14, 1014 (2022), DOI: 10.3390/polym14051014 55 10.3390/polym14051014 false true Reference 65839567 /api/reference/65839567 56. L. Lendvai, D. Rigotti, Thermal and thermomechanical properties of Boron nitride-filled acrylonitrile butadiene styrene (ABS) composites. Acta Technica Jaurinensis. 16, 123–128 (2023), DOI: 10.14513/actatechjaur.00706 56 10.14513/actatechjaur.00706 false true Reference 65839568 /api/reference/65839568 57. C. Yuan, J. Li, L. Lindsay, D. Cherns, J.W. Pomeroy, S. Liu, J.H. Edgar, M. Kuball, Modulating the thermal conductivity in hexagonal Boron nitride via controlled Boron isotope concentration. Commun. Phys. 2, 43 (2019), DOI: 10.1038/s42005-019-0145-5 57 10.1038/s42005-019-0145-5 false true Reference 65839569 /api/reference/65839569 58. C. Pan, J. Zhang, K. Kou, Y. Zhang, G. Wu, Investigation of the through-plane thermal conductivity of polymer composites with in-plane oriented hexagonal Boron nitride. Int. J. Heat Mass Transf. 120, 1–8 (2018), DOI: 10.1016/j.ijheatmasstransfer.2017.12.015 58 10.1016/j.ijheatmasstransfer.2017.12.015 false true Reference 65839570 /api/reference/65839570 59. C. Steinborn, M. Herrmann, U. Keitel, A. Schönecker, J. Räthel, D. Rafaja, J. Eichler, Correlation between microstructure and electrical resistivity of hexagonal Boron nitride ceramics. J. Eur. Ceram. Soc. 33, 1225–1235 (2013), DOI: 10.1016/j.jeurceramsoc.2012.11.024 59 10.1016/j.jeurceramsoc.2012.11.024 false true Reference 65839571 /api/reference/65839571 60. E. Seran, M. Godefroy, N. Renno, H. Elliott, Variations of electric field and electric resistivity of air caused by dust motion. J. Geophys. Research: Space Phys. 118, 5358–5368 (2013), DOI: 10.1002/jgra.50478 60 10.1002/jgra.50478 false true /api/publication/36144057 Lendvai László et al. Effect of filament humidity on the properties of material extrusion 3D-printed acrylonitrile butadiene styrene/hexagonal boron nitride composites. (2025) EMERGENT MATERIALS 2522-5731 2522-574X 8 8 6791-6806<div class="JournalArticle Publication long-list"> <div class="authors"> <img title="Forrásközlemény" style="float: left" src="/frontend/resources/grid/publication-core-icon.png"> <img title="Idézőközlemény" style="float: left" src="/frontend/resources/grid/publication-citation-icon.png"> <div class="autype autype0"> <span class="author-name" mtid="10047029"><a href="/gui2/?type=authors&mode=browse&sel=10047029" target="_blank">Lendvai László ✉ (<span class="authorship-author-name">Lendvai László</span> <span class="authorAux-mtmt"> Polimer anyagtudomány</span>) </a> </span> <span class="author-affil"><span title="Széchenyi István Egyetem">SZE</span>/<span title="AUDI Hungaria Járműmérnöki Kar">AHJK</span>/Anyagtudományi és Technológiai Tanszék</span> ;&nbsp;&nbsp;&nbsp; <span class="author-name" mtid="10088349"><a href="/gui2/?type=authors&mode=browse&sel=10088349" target="_blank">Jakab Sándor Kálmán (<span class="authorship-author-name">Jakab Sándor Kálmán</span> <span class="authorAux-mtmt"> Polimertechnológiák</span>) </a> </span> <span class="author-affil"><span title="Széchenyi István Egyetem">SZE</span>/<span title="AUDI Hungaria Járműmérnöki Kar">AHJK</span>/Anyagtudományi és Technológiai Tanszék</span> ;&nbsp;&nbsp;&nbsp; <span class="author-name" mtid="10055820"><a href="/gui2/?type=authors&mode=browse&sel=10055820" target="_blank">Fekete Imre (<span class="authorship-author-name">Fekete Imre</span> <span class="authorAux-mtmt"> Anyagtudomány</span>) </a> </span> <span class="author-affil"><span title="Széchenyi István Egyetem">SZE</span>/<span title="AUDI Hungaria Járműmérnöki Kar">AHJK</span>/Anyagtudományi és Technológiai Tanszék</span> ;&nbsp;&nbsp;&nbsp; <span class="author-name" >Rigotti Daniele </span> ;&nbsp;&nbsp;&nbsp; <span class="author-name" >Pegoretti Alessandro </span> </div> </div> <div class="title"><a href="/gui2/?mode=browse&params=publication;36144057" target="_blank">Effect of filament humidity on the properties of material extrusion 3D-printed acrylonitrile butadiene styrene/hexagonal boron nitride composites</a></div> <div> <span class="journal-title">EMERGENT MATERIALS</span> <span class="journal-issn">(<a target="_blank" href="https://portal.issn.org/resource/ISSN/2522-5731">2522-5731</a> <a target="_blank" href="https://portal.issn.org/resource/ISSN/2522-574X">2522-574X</a>)</span>: <span class="journal-volume">8</span> <span class="journal-issue">8</span> <span class="page"> pp 6791-6806 </span> <span class="year">(2025)</span> </div> <div class="pub-footer"> <span class="language" xmlns="http://www.w3.org/1999/html">Nyelv: Angol | </span> <span class="identifiers"> <span class="id identifier oa_GOLD" title=" Gold "> <a style="color:blue" title="10.1007/s42247-025-01108-6" target="_blank" href="https://doi.org/10.1007/s42247-025-01108-6"> DOI </a> </span> <span class="id identifier oa_none" title="none"> <a style="color:blue" title="001489035600001" target="_blank" href="https://www.webofscience.com/wos/woscc/full-record/001489035600001"> WoS </a> </span> <span class="id identifier oa_GOLD" title=" Gold "> <a style="color:black" title="224468" target="_blank" href="https://real.mtak.hu/224468"> REAL </a> </span> <span class="id identifier oa_none" title="none"> <a style="color:blue" title="105005097240" target="_blank" href="http://www.scopus.com/record/display.url?origin=inward&eid=2-s2.0-105005097240"> Scopus </a> </span> <span class="id identifier oa_none" title="none"> <a style="color:blue" title="https://link.springer.com/10.1007/s42247-025-01108-6" target="_blank" href="https://link.springer.com/10.1007/s42247-025-01108-6"> Egyéb URL </a> </span> </span> <OnlyViewableByAuthor><div class="ratings"> <div class="journal-subject">Folyóirat szakterülete: Scopus - Biomaterials&nbsp;&nbsp;&nbsp;SJR indikátor:&nbsp;Q2</div> <div class="journal-subject">Folyóirat szakterülete: Scopus - Ceramics and Composites&nbsp;&nbsp;&nbsp;SJR indikátor:&nbsp;Q2</div> <div class="journal-subject">Folyóirat szakterülete: Scopus - Renewable Energy, Sustainability and the Environment&nbsp;&nbsp;&nbsp;SJR indikátor:&nbsp;Q2</div> <div class="journal-subject">Folyóirat szakterülete: Scopus - Waste Management and Disposal&nbsp;&nbsp;&nbsp;SJR indikátor:&nbsp;Q2</div> </div></OnlyViewableByAuthor> <div class="publication-citation" style="margin-left: 0.5cm;"> <span title="Nyilvános idézőközlemények összesen, említések nélkül" class="citingPub-count">Nyilvános idéző összesen: 5</span> | Független: 3 | Függő: 2 | Nem jelölt: 0 | WoS jelölt: 4 | Scopus jelölt:&nbsp;4 | WoS/Scopus jelölt:&nbsp;5 | DOI jelölt:&nbsp;5 </div> <div class="publication-citation"> <a target="_blank" href="/api/publication?cond=citations.related;eq;36144057&sort=publishedYear,desc&sort=title"> Idézett közlemények száma: 7 </a> </div> <div class="mtid"><span class="long-pub-mtid">Közlemény: 36144057</span> | <span class="status-data status-VALIDATED"> Egyeztetett </span> Forrás Idéző | <span class="type-subtype">Folyóiratcikk ( Szakcikk ) </span> | <span class="pub-category">Tudományos</span> | <span class="publication-sourceOfData">kézi felvitel</span> </div> <div class="funder"> (Bolyai János Kutatási Ösztöndíj) Támogató: MTA, (TKP2021-NVA-23), (ÚNKP-23-5-SZE-112) Támogató: NKFIH </div> <div class="lastModified">Utolsó módosítás: 2026.02.23. 15:35 Vasvari Lilian (MTMT Központ, admin) </div> </div></div>