Transformation of Biomass Power Plant Ash into Composite Fertilizers: A Perspective
to Prepare a Rain-Controlled Ammonium Ion–Releasing Composite Fertilizer
We have developed a convenient route to transform biomass power plant ashes (BPPA)
into porous sponge-like fertilizer composites. The absence of water prevents the chemical
reaction and carbon dioxide formation when concentrated sulfuric acid is mixed with
BPPA and CaCO3. Adding water, however, initiates the protonation reaction of carbonate
ion content and starts CO2 evolution. The key element of the method was that the BPPA
and, optionally, CaCO3 and/or CaSO4·0.5H2O were mixed with concentrated sulfuric acid
to make a paste-like consistency. No gas evolution occurred at this stage; however,
with the subsequent and controlled addition of water, CO2 gas evolved and was released
through the channels developed in the pastry-like material due to the internal gas
pressure, but without foaming. Using a screw-containing tube reactor, the water can
be introduced under pressure. Due to the pressure, the pores in the pastry-like material
became smaller, and consequently, the mechanical strength of the granulated and solidified
mixture became higher than that of the reaction products prepared under atmospheric
pressure. The main reaction products were syngenite (K2Ca(SO4)2·H2O) and polyhalite
(K2Ca2Mg(SO4)4·2H2O). These compounds are valuable fertilizer components in themselves,
but the material’s porous nature helps absorb solutions of microelement fertilizers.
Surprisingly, concentrated ammonium nitrate solutions transform the syngenite content
of the porous fertilizer into ammonium calcium sulfate ((NH4)2Ca(SO4)2·2H2O, koktaite).
Koktaite is slightly soluble in water, thus the amount of ammonium ion released on
the dissolution of koktaite depends on the amount of available water. Accordingly,
ammonium ion release for plants can be increased with rain or irrigation, and koktaite
is undissolved and does not decompose in drought situations. The pores (holes) of
this sponge-like fertilizer product can be filled with different solutions containing
other fertilizer components (phosphates, zinc, etc.) to adjust the composition of
the requested fertilizer compositions for particular soils and plant production. The
method allows the preparation of ammonium nitrate composite fertilizers containing
metallic microelements, and various solid sponge-like composite materials with adjusted
amounts of slowly releasing fertilizer components like syngenite and koktaite.