<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="https://m2.mtmt.hu/xsl/gui3.xsl" ?>
<myciteResult>
  <serverUrl>https://m2.mtmt.hu/</serverUrl>
  <labelLang>eng</labelLang>
  <responseDate>2026-04-16 14:40</responseDate>
  <content>
    <publication>
      <otype>JournalArticle</otype>
      <mtid>33628631</mtid>
      <status>VALIDATED</status>
      <published>true</published>
      <comment>Funding Agency and Grant Number: 9th Sino-Hungarian Intergovernmental Scientific and Technological Cooperation Project [2019-2.1.11-TET-2020-00203]; Janos Bolyai Research Scholarship of the Hungarian Academy of Sciences [2021-07]; New National Excellence Program of the Ministry for Culture and Innovation from the source of the National Research, Development and Innovation Fund [BO/00508/22/6, BO/00658/21/6]; Ministry of Innovation and Technology of Hungary from the National Research, Development and Innovation Fund [1JNKP-22-5-BME-327, 1JNKP-22-5-BME-309];  [BME-NVA-02];  [TKP2021]
            Funding text: This research was implemented thanks to the support of the 2019-2.1.11-TET-2020-00203 project, which encourages scientific and technological cooperation between China and Hungary and the 9th Sino-Hungarian Intergovernmental Scientific and Technological Cooperation Project (Grant No. 2021-07). This research was partly supported by the Janos Bolyai Research Scholarship of the Hungarian Academy of Sciences No. BO/00508/22/6 and BO/00658/21/6. Moreover, by 1JNKP-22-5-BME-327 and 1JNKP-22-5-BME-309 New National Excellence Program of the Ministry for Culture and Innovation from the source of the National Research, Development and Innovation Fund. The research reported in this paper is part of project no. BME-NVA-02, implemented with the support provided by the Ministry of Innovation and Technology of Hungary from the National Research, Development and Innovation Fund, financed under the TKP2021 funding scheme.</comment>
      <unhandledTickets>0</unhandledTickets>
      <deleted>false</deleted>
      <lastRefresh>2026-02-18T08:00:43.394+0000</lastRefresh>
      <lastModified>2024-02-12T17:15:20.824+0000</lastModified>
      <created>2023-02-08T07:37:09.960+0000</created>
      <creator>
        <snippet>true</snippet>
        <mtid>10058765</mtid>
        <familyName>Balázs</familyName>
        <givenName>Barnabás Zoltán</givenName>
        <link>/api/author/10058765</link>
        <otype>Author</otype>
        <label>Barnabás Zoltán Balázs (Gyártástechnológia)</label>
        <published>true</published>
        <oldId>10058765</oldId>
      </creator>
      <lastDuplumSearch>2025-02-10T21:23:20.460+0000</lastDuplumSearch>
      <validated>2023-11-14T10:49:08.760+0000</validated>
      <validator>
        <snippet>true</snippet>
        <mtid>521</mtid>
        <familyName>Szuper</familyName>
        <givenName>Admin</givenName>
        <link>/api/admin/521</link>
        <otype>Admin</otype>
        <label>Admin Szuper (admin)</label>
        <published>true</published>
      </validator>
      <core>true</core>
      <publicationPending>false</publicationPending>
      <type>
        <snippet>true</snippet>
        <mtid>24</mtid>
        <code>24</code>
        <link>/api/publicationtype/24</link>
        <otype>PublicationType</otype>
        <label>Journal Article</label>
        <listPosition>1</listPosition>
        <published>true</published>
        <oldId>24</oldId>
        <otypeName>JournalArticle</otypeName>
      </type>
      <subType>
        <snippet>true</snippet>
        <mtid>1134514</mtid>
        <nameEng>Survey paper</nameEng>
        <docType>
          <snippet>true</snippet>
          <mtid>24</mtid>
          <code>24</code>
          <link>/api/publicationtype/24</link>
          <otype>PublicationType</otype>
          <label>Journal Article</label>
          <listPosition>1</listPosition>
          <published>true</published>
          <oldId>24</oldId>
          <otypeName>JournalArticle</otypeName>
        </docType>
        <link>/api/subtype/1134514</link>
        <name>Összefoglaló cikk</name>
        <otype>SubType</otype>
        <label>Survey paper (Journal Article)</label>
        <listPosition>102</listPosition>
        <published>true</published>
        <oldId>1134514</oldId>
      </subType>
      <category>
        <snippet>true</snippet>
        <mtid>1</mtid>
        <link>/api/category/1</link>
        <otype>Category</otype>
        <label>Scientific</label>
        <published>true</published>
        <oldId>1</oldId>
      </category>
      <firstAuthor>Geier, Norbert</firstAuthor>
      <title>A critical review on mechanical micro-drilling of glass and carbon fibre reinforced polymer (GFRP and CFRP) composites</title>
      <journal>
        <snippet>true</snippet>
        <sciIndexed>true</sciIndexed>
        <link>/api/journal/11718</link>
        <reviewType>REVIEWED</reviewType>
        <label>COMPOSITES PART B-ENGINEERING 1359-8368 1879-1069</label>
        <published>true</published>
        <hungarian>false</hungarian>
        <oldId>11718</oldId>
        <noIF>false</noIF>
        <mtid>11718</mtid>
        <scopusIndexed>true</scopusIndexed>
        <pIssn>1359-8368</pIssn>
        <eIssn>1879-1069</eIssn>
        <otype>Journal</otype>
        <lang>FOREIGN</lang>
      </journal>
      <volume>254</volume>
      <internalId>110589</internalId>
      <firstPageOrInternalIdForSort>110589</firstPageOrInternalIdForSort>
      <pageLength>21</pageLength>
      <publishedYear>2023</publishedYear>
      <fundings>
        <funding>
          <otype>Funding</otype>
          <mtid>2023223</mtid>
          <link>/api/funding/2023223</link>
          <label>Bolyai János Kutatási Ösztöndíj(BO/00658/21/6) Funder: Bolyai János Kutatási Ösztöndíj</label>
          <published>false</published>
          <snippet>true</snippet>
        </funding>
        <funding>
          <otype>Funding</otype>
          <mtid>2023224</mtid>
          <link>/api/funding/2023224</link>
          <label>(BME-NVA-02 (TKP2021))</label>
          <published>false</published>
          <snippet>true</snippet>
        </funding>
        <funding>
          <otype>Funding</otype>
          <mtid>2023225</mtid>
          <link>/api/funding/2023225</link>
          <label>Új Nemzeti Kiválóság Program(ÚNKP-22-5- BME-309)</label>
          <published>false</published>
          <snippet>true</snippet>
        </funding>
      </fundings>
      <digital/>
      <printed>true</printed>
      <sourceYear>2023</sourceYear>
      <foreignEdition>true</foreignEdition>
      <foreignLanguage>true</foreignLanguage>
      <fullPublication>true</fullPublication>
      <conferencePublication>false</conferencePublication>
      <nationalOrigin>true</nationalOrigin>
      <missingAuthor>false</missingAuthor>
      <oaType>GOLD</oaType>
      <oaCheckDate>2026-02-18</oaCheckDate>
      <oaFree>true</oaFree>
      <oaLink>http://real.mtak.hu/162348</oaLink>
      <citationCount>67</citationCount>
      <citationCountUnpublished>0</citationCountUnpublished>
      <citationCountWoOther>67</citationCountWoOther>
      <independentCitCountWoOther>61</independentCitCountWoOther>
      <nationalOriginCitationCount>5</nationalOriginCitationCount>
      <foreignEditionCitationCount>67</foreignEditionCitationCount>
      <doiCitationCount>66</doiCitationCount>
      <wosCitationCount>65</wosCitationCount>
      <scopusCitationCount>27</scopusCitationCount>
      <wosScopusCitationCount>65</wosScopusCitationCount>
      <wosScopusCitationCountWoOther>65</wosScopusCitationCountWoOther>
      <wosScopusIndependentCitationCount>59</wosScopusIndependentCitationCount>
      <wosScopusIndependentCitationCountWoOther>59</wosScopusIndependentCitationCountWoOther>
      <independentCitationCount>61</independentCitationCount>
      <selfCitationCount>6</selfCitationCount>
      <unhandledCitationCount>0</unhandledCitationCount>
      <citingPubCount>67</citingPubCount>
      <independentCitingPubCount>61</independentCitingPubCount>
      <citingPubCountWoOther>67</citingPubCountWoOther>
      <independentCitingPubCountWoOther>61</independentCitingPubCountWoOther>
      <unhandledCitingPubCount>0</unhandledCitingPubCount>
      <citedPubCount>11</citedPubCount>
      <citedCount>11</citedCount>
      <pubStats>
        <types>
          <type>Folyóiratcikk</type>
          <typeEng>Journal Article</typeEng>
          <code>24</code>
          <count>66</count>
        </types>
        <types>
          <type>Könyvrészlet</type>
          <typeEng>Chapter in Book</typeEng>
          <code>25</code>
          <count>1</count>
        </types>
        <types>
          <type>Könyv</type>
          <typeEng>Book</typeEng>
          <code>23</code>
          <count>0</count>
        </types>
        <types>
          <type>Egyéb konferenciaközlemény</type>
          <typeEng>Conference paper</typeEng>
          <code>31</code>
          <count>0</count>
        </types>
        <types>
          <type>Egyéb konferenciakötet</type>
          <typeEng>Conference proceedings</typeEng>
          <code>32</code>
          <count>0</count>
        </types>
        <types>
          <type>Oltalmi formák</type>
          <typeEng>Protection forms</typeEng>
          <code>26</code>
          <count>0</count>
        </types>
        <types>
          <type>Disszertáció</type>
          <typeEng>Thesis</typeEng>
          <code>28</code>
          <count>0</count>
        </types>
        <types>
          <type>Egyéb</type>
          <typeEng>Miscellaneous</typeEng>
          <code>29</code>
          <count>0</count>
        </types>
        <types>
          <type>Alkotás</type>
          <typeEng>Achievement</typeEng>
          <code>22</code>
          <count>0</count>
        </types>
        <types>
          <type>Kutatási adat</type>
          <typeEng>Research data</typeEng>
          <code>33</code>
          <count>0</count>
        </types>
        <citationTypes>
          <type>Folyóiratcikk</type>
          <typeEng>Journal Article</typeEng>
          <code>24</code>
          <countUnknown>0</countUnknown>
          <countIndependent>0</countIndependent>
          <countSelfCitation>0</countSelfCitation>
        </citationTypes>
        <citationTypes>
          <type>Könyvrészlet</type>
          <typeEng>Chapter in Book</typeEng>
          <code>25</code>
          <countUnknown>0</countUnknown>
          <countIndependent>0</countIndependent>
          <countSelfCitation>0</countSelfCitation>
        </citationTypes>
        <citationTypes>
          <type>Könyv</type>
          <typeEng>Book</typeEng>
          <code>23</code>
          <countUnknown>0</countUnknown>
          <countIndependent>0</countIndependent>
          <countSelfCitation>0</countSelfCitation>
        </citationTypes>
        <citationTypes>
          <type>Egyéb konferenciaközlemény</type>
          <typeEng>Conference paper</typeEng>
          <code>31</code>
          <countUnknown>0</countUnknown>
          <countIndependent>0</countIndependent>
          <countSelfCitation>0</countSelfCitation>
        </citationTypes>
        <citationTypes>
          <type>Egyéb konferenciakötet</type>
          <typeEng>Conference proceedings</typeEng>
          <code>32</code>
          <countUnknown>0</countUnknown>
          <countIndependent>0</countIndependent>
          <countSelfCitation>0</countSelfCitation>
        </citationTypes>
        <citationTypes>
          <type>Oltalmi formák</type>
          <typeEng>Protection forms</typeEng>
          <code>26</code>
          <countUnknown>0</countUnknown>
          <countIndependent>0</countIndependent>
          <countSelfCitation>0</countSelfCitation>
        </citationTypes>
        <citationTypes>
          <type>Disszertáció</type>
          <typeEng>Thesis</typeEng>
          <code>28</code>
          <countUnknown>0</countUnknown>
          <countIndependent>0</countIndependent>
          <countSelfCitation>0</countSelfCitation>
        </citationTypes>
        <citationTypes>
          <type>Egyéb</type>
          <typeEng>Miscellaneous</typeEng>
          <code>29</code>
          <countUnknown>0</countUnknown>
          <countIndependent>0</countIndependent>
          <countSelfCitation>0</countSelfCitation>
        </citationTypes>
        <citationTypes>
          <type>Alkotás</type>
          <typeEng>Achievement</typeEng>
          <code>22</code>
          <countUnknown>0</countUnknown>
          <countIndependent>0</countIndependent>
          <countSelfCitation>0</countSelfCitation>
        </citationTypes>
        <citationTypes>
          <type>Kutatási adat</type>
          <typeEng>Research data</typeEng>
          <code>33</code>
          <countUnknown>0</countUnknown>
          <countIndependent>0</countIndependent>
          <countSelfCitation>0</countSelfCitation>
        </citationTypes>
        <years>
          <year>2023</year>
          <publicationCount>0</publicationCount>
          <citationCount>8</citationCount>
          <independentCitationCount>5</independentCitationCount>
          <citingPubCount>8</citingPubCount>
          <independentCitingPubCount>5</independentCitingPubCount>
          <oaStats/>
          <oaStats2/>
        </years>
        <years>
          <year>2024</year>
          <publicationCount>0</publicationCount>
          <citationCount>23</citationCount>
          <independentCitationCount>22</independentCitationCount>
          <citingPubCount>23</citingPubCount>
          <independentCitingPubCount>22</independentCitingPubCount>
          <oaStats/>
          <oaStats2/>
        </years>
        <years>
          <year>2025</year>
          <publicationCount>0</publicationCount>
          <citationCount>34</citationCount>
          <independentCitationCount>32</independentCitationCount>
          <citingPubCount>34</citingPubCount>
          <independentCitingPubCount>32</independentCitingPubCount>
          <oaStats/>
          <oaStats2/>
        </years>
        <years>
          <year>2026</year>
          <publicationCount>0</publicationCount>
          <citationCount>2</citationCount>
          <independentCitationCount>2</independentCitationCount>
          <citingPubCount>2</citingPubCount>
          <independentCitingPubCount>2</independentCitingPubCount>
          <oaStats/>
          <oaStats2/>
        </years>
      </pubStats>
      <ratingsForSort>D1</ratingsForSort>
      <hasCitationDuplums>false</hasCitationDuplums>
      <inSelectedPubs>10058765,10082692,10035283</inSelectedPubs>
      <importDuplum>false</importDuplum>
      <importOverwritten>false</importOverwritten>
      <importSkipped>false</importSkipped>
      <userChangeableUntil>2023-02-09T09:10:24.119+0000</userChangeableUntil>
      <directInstitutesForSort>Bánki Donát Gépész és Biztonságtechnikai Mérnök... (ÓE); ELKH-BME Kompozittechnológiai Kutatócsoport (BME / GPK / PT); Gyártástudomány és -technológia Tanszék (BME / GPK); Polimertechnika Tanszék (BME / GPK)</directInstitutesForSort>
      <ownerAuthorCount>5</ownerAuthorCount>
      <ownerInstituteCount>10</ownerInstituteCount>
      <directInstituteCount>4</directInstituteCount>
      <authorCount>10</authorCount>
      <contributorCount>0</contributorCount>
      <hasQualityFactor>true</hasQualityFactor>
      <languages>
        <language>
          <otype>Language</otype>
          <mtid>10002</mtid>
          <link>/api/language/10002</link>
          <label>English</label>
          <name>Angol</name>
          <nameEng>English</nameEng>
          <published>true</published>
          <oldId>2</oldId>
          <snippet>true</snippet>
        </language>
      </languages>
      <authorships>
        <authorship>
          <otype>PersonAuthorship</otype>
          <mtid>106642886</mtid>
          <link>/api/authorship/106642886</link>
          <label>Geier, Norbert ✉ [Geier, Norbert (Gyártástechnológia), author] Bánki Donát Faculty of Mechanical Engineering a... (ÓU); Department of Manufacturing Science and Enginee... (BUTE / FME)</label>
          <listPosition>1</listPosition>
          <share>0.1</share>
          <first>true</first>
          <last>false</last>
          <corresponding>true</corresponding>
          <author>
            <otype>Author</otype>
            <mtid>10056359</mtid>
            <link>/api/author/10056359</link>
            <label>Norbert Geier (Gyártástechnológia)</label>
            <familyName>Geier</familyName>
            <givenName>Norbert</givenName>
            <published>true</published>
            <oldId>10056359</oldId>
            <snippet>true</snippet>
          </author>
          <familyName>Geier</familyName>
          <givenName>Norbert</givenName>
          <authorTyped>true</authorTyped>
          <editorTyped>false</editorTyped>
          <otherTyped>false</otherTyped>
          <type>
            <otype>AuthorshipType</otype>
            <mtid>1</mtid>
            <link>/api/authorshiptype/1</link>
            <label>Author</label>
            <code>0</code>
            <published>true</published>
            <oldId>0</oldId>
            <snippet>true</snippet>
          </type>
          <published>false</published>
          <snippet>true</snippet>
        </authorship>
        <authorship>
          <otype>PersonAuthorship</otype>
          <mtid>106642887</mtid>
          <link>/api/authorship/106642887</link>
          <label>Patra, Karali</label>
          <listPosition>2</listPosition>
          <share>0.1</share>
          <first>false</first>
          <last>false</last>
          <corresponding>false</corresponding>
          <familyName>Patra</familyName>
          <givenName>Karali</givenName>
          <authorTyped>true</authorTyped>
          <editorTyped>false</editorTyped>
          <otherTyped>false</otherTyped>
          <type>
            <otype>AuthorshipType</otype>
            <mtid>1</mtid>
            <link>/api/authorshiptype/1</link>
            <label>Author</label>
            <code>0</code>
            <published>true</published>
            <oldId>0</oldId>
            <snippet>true</snippet>
          </type>
          <published>false</published>
          <snippet>true</snippet>
        </authorship>
        <authorship>
          <otype>PersonAuthorship</otype>
          <mtid>106642888</mtid>
          <link>/api/authorship/106642888</link>
          <label>Anand, Ravi Shankar</label>
          <listPosition>3</listPosition>
          <share>0.1</share>
          <first>false</first>
          <last>false</last>
          <corresponding>false</corresponding>
          <familyName>Anand</familyName>
          <givenName>Ravi Shankar</givenName>
          <authorTyped>true</authorTyped>
          <editorTyped>false</editorTyped>
          <otherTyped>false</otherTyped>
          <type>
            <otype>AuthorshipType</otype>
            <mtid>1</mtid>
            <link>/api/authorshiptype/1</link>
            <label>Author</label>
            <code>0</code>
            <published>true</published>
            <oldId>0</oldId>
            <snippet>true</snippet>
          </type>
          <published>false</published>
          <snippet>true</snippet>
        </authorship>
        <authorship>
          <otype>PersonAuthorship</otype>
          <mtid>106642889</mtid>
          <link>/api/authorship/106642889</link>
          <label>Ashworth, Sam</label>
          <listPosition>4</listPosition>
          <share>0.1</share>
          <first>false</first>
          <last>false</last>
          <corresponding>false</corresponding>
          <familyName>Ashworth</familyName>
          <givenName>Sam</givenName>
          <authorTyped>true</authorTyped>
          <editorTyped>false</editorTyped>
          <otherTyped>false</otherTyped>
          <type>
            <otype>AuthorshipType</otype>
            <mtid>1</mtid>
            <link>/api/authorshiptype/1</link>
            <label>Author</label>
            <code>0</code>
            <published>true</published>
            <oldId>0</oldId>
            <snippet>true</snippet>
          </type>
          <published>false</published>
          <snippet>true</snippet>
        </authorship>
        <authorship>
          <otype>PersonAuthorship</otype>
          <mtid>106642890</mtid>
          <link>/api/authorship/106642890</link>
          <label>Balázs, Barnabás Zoltán [Balázs, Barnabás Zoltán (Gyártástechnológia), author] Department of Manufacturing Science and Enginee... (BUTE / FME)</label>
          <listPosition>5</listPosition>
          <share>0.1</share>
          <first>false</first>
          <last>false</last>
          <corresponding>false</corresponding>
          <author>
            <otype>Author</otype>
            <mtid>10058765</mtid>
            <link>/api/author/10058765</link>
            <label>Barnabás Zoltán Balázs (Gyártástechnológia)</label>
            <familyName>Balázs</familyName>
            <givenName>Barnabás Zoltán</givenName>
            <published>true</published>
            <oldId>10058765</oldId>
            <snippet>true</snippet>
          </author>
          <familyName>Balázs</familyName>
          <givenName>Barnabás Zoltán</givenName>
          <authorTyped>true</authorTyped>
          <editorTyped>false</editorTyped>
          <otherTyped>false</otherTyped>
          <type>
            <otype>AuthorshipType</otype>
            <mtid>1</mtid>
            <link>/api/authorshiptype/1</link>
            <label>Author</label>
            <code>0</code>
            <published>true</published>
            <oldId>0</oldId>
            <snippet>true</snippet>
          </type>
          <published>false</published>
          <snippet>true</snippet>
        </authorship>
        <authorship>
          <otype>PersonAuthorship</otype>
          <mtid>106642891</mtid>
          <link>/api/authorship/106642891</link>
          <label>Lukács, Tamás [Lukács, Tamás (Gyártástechnológia), author] Department of Manufacturing Science and Enginee... (BUTE / FME)</label>
          <listPosition>6</listPosition>
          <share>0.1</share>
          <first>false</first>
          <last>false</last>
          <corresponding>false</corresponding>
          <author>
            <otype>Author</otype>
            <mtid>10082694</mtid>
            <link>/api/author/10082694</link>
            <label>Tamás Lukács (Gyártástechnológia)</label>
            <familyName>Lukács</familyName>
            <givenName>Tamás</givenName>
            <published>true</published>
            <snippet>true</snippet>
          </author>
          <familyName>Lukács</familyName>
          <givenName>Tamás</givenName>
          <authorTyped>true</authorTyped>
          <editorTyped>false</editorTyped>
          <otherTyped>false</otherTyped>
          <type>
            <otype>AuthorshipType</otype>
            <mtid>1</mtid>
            <link>/api/authorshiptype/1</link>
            <label>Author</label>
            <code>0</code>
            <published>true</published>
            <oldId>0</oldId>
            <snippet>true</snippet>
          </type>
          <published>false</published>
          <snippet>true</snippet>
        </authorship>
        <authorship>
          <otype>PersonAuthorship</otype>
          <mtid>106642892</mtid>
          <link>/api/authorship/106642892</link>
          <label>Magyar, Gergely [Magyar, Gergely (Gyártástechnológia), author] Department of Manufacturing Science and Enginee... (BUTE / FME)</label>
          <listPosition>7</listPosition>
          <share>0.1</share>
          <first>false</first>
          <last>false</last>
          <corresponding>false</corresponding>
          <author>
            <otype>Author</otype>
            <mtid>10082692</mtid>
            <link>/api/author/10082692</link>
            <label>Gergely Magyar (Gyártástechnológia)</label>
            <familyName>Magyar</familyName>
            <givenName>Gergely</givenName>
            <published>true</published>
            <snippet>true</snippet>
          </author>
          <familyName>Magyar</familyName>
          <givenName>Gergely</givenName>
          <authorTyped>true</authorTyped>
          <editorTyped>false</editorTyped>
          <otherTyped>false</otherTyped>
          <type>
            <otype>AuthorshipType</otype>
            <mtid>1</mtid>
            <link>/api/authorshiptype/1</link>
            <label>Author</label>
            <code>0</code>
            <published>true</published>
            <oldId>0</oldId>
            <snippet>true</snippet>
          </type>
          <published>false</published>
          <snippet>true</snippet>
        </authorship>
        <authorship>
          <otype>PersonAuthorship</otype>
          <mtid>106642893</mtid>
          <link>/api/authorship/106642893</link>
          <label>Tamás-Bényei, Péter [Tamás-Bényei, Péter (Polimer Anyagtudo...), author] Department of Polymer Engineering (BUTE / FME); ELKH-BME Composite Science and Technology Resea... (BUTE / FME / DPE)</label>
          <listPosition>8</listPosition>
          <share>0.1</share>
          <first>false</first>
          <last>false</last>
          <corresponding>false</corresponding>
          <author>
            <otype>Author</otype>
            <mtid>10035283</mtid>
            <link>/api/author/10035283</link>
            <label>Péter Tamás-Bényei (Polimer Anyagtudomány)</label>
            <familyName>Tamás-Bényei</familyName>
            <givenName>Péter</givenName>
            <published>true</published>
            <oldId>10035283</oldId>
            <snippet>true</snippet>
          </author>
          <familyName>Tamás-Bényei</familyName>
          <givenName>Péter</givenName>
          <authorTyped>true</authorTyped>
          <editorTyped>false</editorTyped>
          <otherTyped>false</otherTyped>
          <type>
            <otype>AuthorshipType</otype>
            <mtid>1</mtid>
            <link>/api/authorshiptype/1</link>
            <label>Author</label>
            <code>0</code>
            <published>true</published>
            <oldId>0</oldId>
            <snippet>true</snippet>
          </type>
          <published>false</published>
          <snippet>true</snippet>
        </authorship>
        <authorship>
          <otype>PersonAuthorship</otype>
          <mtid>106642894</mtid>
          <link>/api/authorship/106642894</link>
          <label>Xu, Jinyang</label>
          <listPosition>9</listPosition>
          <share>0.1</share>
          <first>false</first>
          <last>false</last>
          <corresponding>false</corresponding>
          <familyName>Xu</familyName>
          <givenName>Jinyang</givenName>
          <authorTyped>true</authorTyped>
          <editorTyped>false</editorTyped>
          <otherTyped>false</otherTyped>
          <type>
            <otype>AuthorshipType</otype>
            <mtid>1</mtid>
            <link>/api/authorshiptype/1</link>
            <label>Author</label>
            <code>0</code>
            <published>true</published>
            <oldId>0</oldId>
            <snippet>true</snippet>
          </type>
          <published>false</published>
          <snippet>true</snippet>
        </authorship>
        <authorship>
          <otype>PersonAuthorship</otype>
          <mtid>106642895</mtid>
          <link>/api/authorship/106642895</link>
          <label>Davim, J Paulo</label>
          <listPosition>10</listPosition>
          <share>0.1</share>
          <first>false</first>
          <last>true</last>
          <corresponding>false</corresponding>
          <familyName>Davim</familyName>
          <givenName>J Paulo</givenName>
          <authorTyped>true</authorTyped>
          <editorTyped>false</editorTyped>
          <otherTyped>false</otherTyped>
          <type>
            <otype>AuthorshipType</otype>
            <mtid>1</mtid>
            <link>/api/authorshiptype/1</link>
            <label>Author</label>
            <code>0</code>
            <published>true</published>
            <oldId>0</oldId>
            <snippet>true</snippet>
          </type>
          <published>false</published>
          <snippet>true</snippet>
        </authorship>
      </authorships>
      <identifiers>
        <identifier>
          <otype>PublicationIdentifier</otype>
          <mtid>23044319</mtid>
          <link>/api/publicationidentifier/23044319</link>
          <label>DOI: 10.1016/j.compositesb.2023.110589</label>
          <source>
            <otype>PlainSource</otype>
            <mtid>6</mtid>
            <link>/api/publicationsource/6</link>
            <label>DOI</label>
            <type>
              <otype>PublicationSourceType</otype>
              <mtid>10001</mtid>
              <link>/api/publicationsourcetype/10001</link>
              <label>DOI</label>
              <mayHaveOa>true</mayHaveOa>
              <published>true</published>
              <snippet>true</snippet>
            </type>
            <name>DOI</name>
            <nameEng>DOI</nameEng>
            <linkPattern>https://doi.org/@@@</linkPattern>
            <publiclyVisible>true</publiclyVisible>
            <published>true</published>
            <oldId>6</oldId>
            <snippet>true</snippet>
          </source>
          <validState>IDENTICAL</validState>
          <idValue>10.1016/j.compositesb.2023.110589</idValue>
          <realUrl>https://doi.org/10.1016/j.compositesb.2023.110589</realUrl>
          <published>false</published>
          <snippet>true</snippet>
        </identifier>
        <identifier>
          <otype>PublicationIdentifier</otype>
          <mtid>24009274</mtid>
          <link>/api/publicationidentifier/24009274</link>
          <label>WoS: 000994536600001</label>
          <source>
            <otype>PlainSource</otype>
            <mtid>1</mtid>
            <link>/api/publicationsource/1</link>
            <label>WoS</label>
            <type>
              <otype>PublicationSourceType</otype>
              <mtid>10003</mtid>
              <link>/api/publicationsourcetype/10003</link>
              <label>Indexelő adatbázis</label>
              <mayHaveOa>false</mayHaveOa>
              <published>true</published>
              <snippet>true</snippet>
            </type>
            <name>WoS</name>
            <nameEng>WoS</nameEng>
            <linkPattern>https://www.webofscience.com/wos/woscc/full-record/@@@</linkPattern>
            <publiclyVisible>true</publiclyVisible>
            <published>true</published>
            <oldId>1</oldId>
            <snippet>true</snippet>
          </source>
          <validState>IDENTICAL</validState>
          <idValue>000994536600001</idValue>
          <realUrl>https://www.webofscience.com/wos/woscc/full-record/000994536600001</realUrl>
          <published>false</published>
          <snippet>true</snippet>
        </identifier>
        <identifier>
          <otype>PublicationIdentifier</otype>
          <mtid>24329864</mtid>
          <link>/api/publicationidentifier/24329864</link>
          <label>REAL: 162348</label>
          <source>
            <otype>SwordSource</otype>
            <mtid>36</mtid>
            <link>/api/publicationsource/36</link>
            <label>REAL</label>
            <type>
              <otype>PublicationSourceType</otype>
              <mtid>10007</mtid>
              <link>/api/publicationsourcetype/10007</link>
              <label>Repozitórium</label>
              <mayHaveOa>true</mayHaveOa>
              <published>true</published>
              <snippet>true</snippet>
            </type>
            <name>REAL</name>
            <nameEng>REAL</nameEng>
            <linkPattern>http://real.mtak.hu/@@@</linkPattern>
            <publiclyVisible>true</publiclyVisible>
            <published>true</published>
            <oldId>36</oldId>
            <snippet>true</snippet>
          </source>
          <oaType>GOLD</oaType>
          <oaFree>true</oaFree>
          <idValue>162348</idValue>
          <realUrl>http://real.mtak.hu/162348</realUrl>
          <published>true</published>
          <snippet>true</snippet>
        </identifier>
        <identifier>
          <otype>PublicationIdentifier</otype>
          <mtid>23101599</mtid>
          <link>/api/publicationidentifier/23101599</link>
          <label>Scopus: 85147606474</label>
          <source>
            <otype>PlainSource</otype>
            <mtid>3</mtid>
            <link>/api/publicationsource/3</link>
            <label>Scopus</label>
            <type>
              <otype>PublicationSourceType</otype>
              <mtid>10003</mtid>
              <link>/api/publicationsourcetype/10003</link>
              <label>Indexelő adatbázis</label>
              <mayHaveOa>false</mayHaveOa>
              <published>true</published>
              <snippet>true</snippet>
            </type>
            <name>Scopus</name>
            <nameEng>Scopus</nameEng>
            <linkPattern>http://www.scopus.com/record/display.url?origin=inward&amp;eid=2-s2.0-@@@</linkPattern>
            <publiclyVisible>true</publiclyVisible>
            <published>true</published>
            <oldId>3</oldId>
            <snippet>true</snippet>
          </source>
          <validState>IDENTICAL</validState>
          <idValue>85147606474</idValue>
          <realUrl>http://www.scopus.com/record/display.url?origin=inward&amp;eid=2-s2.0-85147606474</realUrl>
          <published>false</published>
          <snippet>true</snippet>
        </identifier>
        <identifier>
          <otype>PublicationIdentifier</otype>
          <mtid>23044320</mtid>
          <link>/api/publicationidentifier/23044320</link>
          <label>Egyéb URL: https://linkinghub.elsevier.com/retrieve/pii/S1359836823000926</label>
          <source>
            <otype>PlainSource</otype>
            <mtid>40</mtid>
            <link>/api/publicationsource/40</link>
            <label>Other URL</label>
            <type>
              <otype>PublicationSourceType</otype>
              <mtid>10006</mtid>
              <link>/api/publicationsourcetype/10006</link>
              <label>Link</label>
              <mayHaveOa>true</mayHaveOa>
              <published>true</published>
              <snippet>true</snippet>
            </type>
            <name>Egyéb URL</name>
            <nameEng>Other URL</nameEng>
            <linkPattern>@@@</linkPattern>
            <publiclyVisible>true</publiclyVisible>
            <published>true</published>
            <oldId>40</oldId>
            <snippet>true</snippet>
          </source>
          <idValue>https://linkinghub.elsevier.com/retrieve/pii/S1359836823000926</idValue>
          <realUrl>https://linkinghub.elsevier.com/retrieve/pii/S1359836823000926</realUrl>
          <published>false</published>
          <snippet>true</snippet>
        </identifier>
        <identifier>
          <otype>PublicationIdentifier</otype>
          <mtid>25465532</mtid>
          <link>/api/publicationidentifier/25465532</link>
          <label>Other URL: https://phd.gpk.bme.hu/pub/s/j/l9/t3?3001787</label>
          <source>
            <otype>PlainSource</otype>
            <mtid>40</mtid>
            <link>/api/publicationsource/40</link>
            <label>Other URL</label>
            <type>
              <otype>PublicationSourceType</otype>
              <mtid>10006</mtid>
              <link>/api/publicationsourcetype/10006</link>
              <label>Link</label>
              <mayHaveOa>true</mayHaveOa>
              <published>true</published>
              <snippet>true</snippet>
            </type>
            <name>Egyéb URL</name>
            <nameEng>Other URL</nameEng>
            <linkPattern>@@@</linkPattern>
            <publiclyVisible>true</publiclyVisible>
            <published>true</published>
            <oldId>40</oldId>
            <snippet>true</snippet>
          </source>
          <idValue>https://phd.gpk.bme.hu/pub/s/j/l9/t3?3001787</idValue>
          <realUrl>https://phd.gpk.bme.hu/pub/s/j/l9/t3?3001787</realUrl>
          <published>true</published>
          <snippet>true</snippet>
        </identifier>
      </identifiers>
      <subjects>
        <classification>
          <otype>Classification</otype>
          <mtid>10986</mtid>
          <link>/api/classification/10986</link>
          <label>Mechanical and manufacturing engineering (shaping, mounting, joining, separation)</label>
          <published>true</published>
          <snippet>true</snippet>
        </classification>
      </subjects>
      <ratings>
        <rating>
          <otype>SjrRating</otype>
          <mtid>11361725</mtid>
          <link>/api/sjrrating/11361725</link>
          <label>sjr:D1 (2023) Scopus - Ceramics and Composites COMPOSITES PART B-ENGINEERING 1359-8368 1879-1069</label>
          <listPos>7</listPos>
          <rankValue>0.1</rankValue>
          <type>journal</type>
          <ratingType>
            <otype>RatingType</otype>
            <mtid>10002</mtid>
            <link>/api/ratingtype/10002</link>
            <label>sjr</label>
            <code>sjr</code>
            <published>true</published>
            <snippet>true</snippet>
          </ratingType>
          <subject>
            <otype>ClassificationExternal</otype>
            <mtid>2503</mtid>
            <link>/api/classificationexternal/2503</link>
            <label>Scopus - Ceramics and Composites</label>
            <published>true</published>
            <oldId>2503</oldId>
            <snippet>true</snippet>
          </subject>
          <ranking>D1</ranking>
          <calculation>DIRECT</calculation>
          <published>true</published>
          <snippet>true</snippet>
        </rating>
      </ratings>
      <references>
        <reference>
          <otype>Reference</otype>
          <mtid>38172716</mtid>
          <link>/api/reference/38172716</link>
          <label>1. Geier 2021: Drilling of carbon fibre reinforced polymer (CFRP) composites: difficulties, challenges and expectations., Procedia Manuf, 54, p. 284, DOI: 10.1016/j.promfg.2021.07.045</label>
          <listPosition>1</listPosition>
          <doi>10.1016/j.promfg.2021.07.045</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172717</mtid>
          <link>/api/reference/38172717</link>
          <label>2. Melentiev 2016: Effects of tool geometry and process parameters on delamination in CFRP drilling: an overview., Procedia CIRP, 45, p. 31, DOI: 10.1016/j.procir.2016.02.255</label>
          <listPosition>2</listPosition>
          <doi>10.1016/j.procir.2016.02.255</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172718</mtid>
          <link>/api/reference/38172718</link>
          <label>3. Hintze 2015: Influence of weave structure on delamination when milling CFRP., J Mater Process Technol, 216, p. 199, DOI: 10.1016/j.jmatprotec.2014.09.004</label>
          <listPosition>3</listPosition>
          <doi>10.1016/j.jmatprotec.2014.09.004</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172719</mtid>
          <link>/api/reference/38172719</link>
          <label>4. Geier 2019: Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: a review., Compos Appl Sci Manuf, 125, DOI: 10.1016/j.compositesa.2019.105552</label>
          <listPosition>4</listPosition>
          <doi>10.1016/j.compositesa.2019.105552</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172720</mtid>
          <link>/api/reference/38172720</link>
          <label>5. Xu 2014: A comparative evaluation of polycrystalline diamond drills in drilling high-strength T800S/250F CFRP., Compos Struct, 117, p. 71, DOI: 10.1016/j.compstruct.2014.06.034</label>
          <listPosition>5</listPosition>
          <doi>10.1016/j.compstruct.2014.06.034</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172721</mtid>
          <link>/api/reference/38172721</link>
          <label>6. Anand 2014: Size effects in micro drilling of carbon fiber reinforced plastic composite., Prod Eng Res Dev, 8, p. 301, DOI: 10.1007/s11740-014-0526-2</label>
          <listPosition>6</listPosition>
          <doi>10.1007/s11740-014-0526-2</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172722</mtid>
          <link>/api/reference/38172722</link>
          <label>7. Pallapothu 2021: Micro drilling of glass fibre reinforced polymer composites., Mater Today Proc, 46, p. 9252, DOI: 10.1016/j.matpr.2020.01.545</label>
          <listPosition>7</listPosition>
          <doi>10.1016/j.matpr.2020.01.545</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172723</mtid>
          <link>/api/reference/38172723</link>
          <label>8. Park 2013: Acoustic properties of micro-perforated panel absorbers backed by Helmholtz resonators for the improvement of low-frequency sound absorption., J Sound Vib, 332, p. 4895, DOI: 10.1016/j.jsv.2013.04.029</label>
          <listPosition>8</listPosition>
          <doi>10.1016/j.jsv.2013.04.029</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172724</mtid>
          <link>/api/reference/38172724</link>
          <label>9. Messing 2008: Smart suction — an advanced concept for laminar flow control of three-dimensional boundary layers.High performance computing on vector systems 2007, p. 53</label>
          <listPosition>9</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172725</mtid>
          <link>/api/reference/38172725</link>
          <label>10. Rahamathullah 2013: Analyses of forces and hole quality in micro-drilling of carbon fabric laminate composites., J Compos Mater, 47, p. 1129, DOI: 10.1177/0021998312445594</label>
          <listPosition>10</listPosition>
          <doi>10.1177/0021998312445594</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172726</mtid>
          <link>/api/reference/38172726</link>
          <label>11. Cheng 1998: Application of a three-dimensional heat flow model to treat laser drilling of carbon fibre composites., Acta Mater, 46, p. 4273, DOI: 10.1016/S1359-6454(98)00090-1</label>
          <listPosition>11</listPosition>
          <doi>10.1016/S1359-6454(98)00090-1</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172727</mtid>
          <link>/api/reference/38172727</link>
          <label>12. Shyha 2009: Drill geometry and operating effects when cutting small diameter holes in CFRP., Int J Mach Tool Manufact, 49, p. 1008, DOI: 10.1016/j.ijmachtools.2009.05.009</label>
          <listPosition>12</listPosition>
          <doi>10.1016/j.ijmachtools.2009.05.009</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172728</mtid>
          <link>/api/reference/38172728</link>
          <label>13. Wang 2022: Comparative investigations on machinability and surface integrity of CFRP plate by picosecond laser vs laser induced plasma micro-drilling., Opt Laser Technol, 151, DOI: 10.1016/j.optlastec.2022.108022</label>
          <listPosition>13</listPosition>
          <doi>10.1016/j.optlastec.2022.108022</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172729</mtid>
          <link>/api/reference/38172729</link>
          <label>14. Ramakrishnan 2016: Overview of fiber optic sensor technologies for strain/temperature sensing applications in composite materials., Sensors, 16, p. 99, DOI: 10.3390/s16010099</label>
          <listPosition>14</listPosition>
          <doi>10.3390/s16010099</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172730</mtid>
          <link>/api/reference/38172730</link>
          <label>15. Yang 2020: 3D printing of polymeric multi-layer micro-perforated panels for tunable wideband sound absorption., Polymers, 12, p. 360, DOI: 10.3390/polym12020360</label>
          <listPosition>15</listPosition>
          <doi>10.3390/polym12020360</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172731</mtid>
          <link>/api/reference/38172731</link>
          <label>16. Whitney 2011: Pop-up book MEMS., J Micromech Microeng, 21, DOI: 10.1088/0960-1317/21/11/115021</label>
          <listPosition>16</listPosition>
          <doi>10.1088/0960-1317/21/11/115021</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172732</mtid>
          <link>/api/reference/38172732</link>
          <label>17. Liu 2014: Effect of energy density and feeding speed on micro-hole drilling in C/SiC composites by picosecond laser., J Mater Process Technol, 214, p. 3131, DOI: 10.1016/j.jmatprotec.2014.07.016</label>
          <listPosition>17</listPosition>
          <doi>10.1016/j.jmatprotec.2014.07.016</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172733</mtid>
          <link>/api/reference/38172733</link>
          <label>18. Zhang 2021: Preparation and analysis of micro-holes in C/SiC composites and ablation with a continuous wave laser., J Eur Ceram Soc, 41, p. 176, DOI: 10.1016/j.jeurceramsoc.2020.08.033</label>
          <listPosition>18</listPosition>
          <doi>10.1016/j.jeurceramsoc.2020.08.033</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172734</mtid>
          <link>/api/reference/38172734</link>
          <label>19. Wang 2017: Character and mechanism of surface micromachining for C/SiC composites by ultrashort plus laser., Adv Appl Ceram, 116, p. 99, DOI: 10.1080/17436753.2016.1257101</label>
          <listPosition>19</listPosition>
          <doi>10.1080/17436753.2016.1257101</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172735</mtid>
          <link>/api/reference/38172735</link>
          <label>20. Young 2002: Impact of Nd-YAG laser drilled holes on the strength and stiffness of laminar flow carbon fibre reinforced composite panels., Compos Appl Sci Manuf, 33, p. 1, DOI: 10.1016/S1359-835X(01)00081-1</label>
          <listPosition>20</listPosition>
          <doi>10.1016/S1359-835X(01)00081-1</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172736</mtid>
          <link>/api/reference/38172736</link>
          <label>21. Suresh 2018: Abrasive jet machining for micro-hole drilling on glass and GFRP composites., Mater Today Proc, 5, p. 5757, DOI: 10.1016/j.matpr.2017.12.171</label>
          <listPosition>21</listPosition>
          <doi>10.1016/j.matpr.2017.12.171</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172737</mtid>
          <link>/api/reference/38172737</link>
          <label>22. Kumar 2018: Fabrication of micro holes in CFRP laminates using EDM., J Manuf Process, 31, p. 859, DOI: 10.1016/j.jmapro.2018.01.011</label>
          <listPosition>22</listPosition>
          <doi>10.1016/j.jmapro.2018.01.011</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172738</mtid>
          <link>/api/reference/38172738</link>
          <label>23. Teicher 2013: Micro-EDM of carbon fibre-reinforced plastics., Procedia CIRP, 6, p. 320, DOI: 10.1016/j.procir.2013.03.092</label>
          <listPosition>23</listPosition>
          <doi>10.1016/j.procir.2013.03.092</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172739</mtid>
          <link>/api/reference/38172739</link>
          <label>24. Dutta 2019: A study of material removal and surface characteristics in micro-electrical discharge machining of carbon fiber-reinforced plastics., Polym Compos, 40, p. 4033, DOI: 10.1002/pc.25264</label>
          <listPosition>24</listPosition>
          <doi>10.1002/pc.25264</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172740</mtid>
          <link>/api/reference/38172740</link>
          <label>25. Priti 2021: Micro-Machining of CFRP composite using electrochemical discharge machining and process optimization by Entropy-VIKOR method., Mater Today Proc, 44, p. 260, DOI: 10.1016/j.matpr.2020.09.463</label>
          <listPosition>25</listPosition>
          <doi>10.1016/j.matpr.2020.09.463</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172741</mtid>
          <link>/api/reference/38172741</link>
          <label>26. Singh 2020: Investigating the impact of LASER assistance on the accuracy of micro-holes generated in carbon fiber reinforced polymer composite by electrochemical discharge machining., J Manuf Process, 60, p. 586, DOI: 10.1016/j.jmapro.2020.10.056</label>
          <listPosition>26</listPosition>
          <doi>10.1016/j.jmapro.2020.10.056</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172742</mtid>
          <link>/api/reference/38172742</link>
          <label>27. Mistry 2018: Finite element analysis and simulation of liquid-assisted laser beam machining process., Int J Adv Manuf Technol, 94, p. 2325, DOI: 10.1007/s00170-017-1009-3</label>
          <listPosition>27</listPosition>
          <doi>10.1007/s00170-017-1009-3</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172743</mtid>
          <link>/api/reference/38172743</link>
          <label>28. Mishra 2022: Performance evaluation and sustainability assessment in laser micro-drilling of carbon nanotube-reinforced polymer matrix composite using MOORA and whale optimization algorithm., Process Integr Optim Sustain, DOI: 10.1007/s41660-022-00234-6</label>
          <listPosition>28</listPosition>
          <doi>10.1007/s41660-022-00234-6</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172744</mtid>
          <link>/api/reference/38172744</link>
          <label>29. Ramanujam 2021: Investigation of micro-hole quality in drilled CFRP laminates through CO2 laser., Arabian J Sci Eng, 46, p. 7557, DOI: 10.1007/s13369-021-05505-x</label>
          <listPosition>29</listPosition>
          <doi>10.1007/s13369-021-05505-x</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172745</mtid>
          <link>/api/reference/38172745</link>
          <label>30. Mishra 2022: Machinability analysis and multiple performance optimization during laser micro-drilling of CNT reinforced polymer nanocomposite., Lasers Manuf Mater Process, DOI: 10.1007/s40516-022-00171-9</label>
          <listPosition>30</listPosition>
          <doi>10.1007/s40516-022-00171-9</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172746</mtid>
          <link>/api/reference/38172746</link>
          <label>31. Jain 2020: Analysis of heat affected zone (HAZ) during micro-drilling of a new hybrid composite., Proc IME C J Mech Eng Sci, 234, p. 620, DOI: 10.1177/0954406219877911</label>
          <listPosition>31</listPosition>
          <doi>10.1177/0954406219877911</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172747</mtid>
          <link>/api/reference/38172747</link>
          <label>32. Liu 2021: Feasibility of micro-hole machining in fiber laser trepan drilling of 2.5D Cf/SiC composite: experimental investigation and optimization., Optik, 242, DOI: 10.1016/j.ijleo.2021.167186</label>
          <listPosition>32</listPosition>
          <doi>10.1016/j.ijleo.2021.167186</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172748</mtid>
          <link>/api/reference/38172748</link>
          <label>33. Rodden 2002: A comprehensive study of the long pulse Nd:YAG laser drilling of multi-layer carbon fibre composites., Opt Commun, 210, p. 319, DOI: 10.1016/S0030-4018(02)01807-2</label>
          <listPosition>33</listPosition>
          <doi>10.1016/S0030-4018(02)01807-2</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172749</mtid>
          <link>/api/reference/38172749</link>
          <label>34. Vishwakarma 2021: Micro electric discharge machining (-EDM) of polymer nanocomposites modified by graphene nanoplatelets/carbon using rotating electrode tool., J Micromech Microeng, 31, DOI: 10.1088/1361-6439/ac11cb</label>
          <listPosition>34</listPosition>
          <doi>10.1088/1361-6439/ac11cb</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172750</mtid>
          <link>/api/reference/38172750</link>
          <label>35. Dogrusadik 2017: Comparative assessment of support plates' influences on delamination damage in micro-drilling of CFRP laminates., Compos Struct, 173, p. 156, DOI: 10.1016/j.compstruct.2017.04.031</label>
          <listPosition>35</listPosition>
          <doi>10.1016/j.compstruct.2017.04.031</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172751</mtid>
          <link>/api/reference/38172751</link>
          <label>36. Shunmugesh 2016: Optimization of process parameters in micro-drilling of carbon fiber reinforced polymer (cfrp) using Taguchi and grey relational analysis., Polym Polym Compos, 24, p. 499</label>
          <listPosition>36</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172752</mtid>
          <link>/api/reference/38172752</link>
          <label>37. Anand 2018: Cutting force and hole quality analysis in micro-drilling of CFRP., Mater Manuf Process, 33, p. 1369, DOI: 10.1080/10426914.2017.1401715</label>
          <listPosition>37</listPosition>
          <doi>10.1080/10426914.2017.1401715</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172753</mtid>
          <link>/api/reference/38172753</link>
          <label>38. Kim 2021: A study on machining performances of micro-drilling of multi-directional carbon fiber reinforced plastic (MD-CFRP) based on nano-solid dry lubrication using graphene NanoPlatelets., Materials, 14, p. 685, DOI: 10.3390/ma14030685</label>
          <listPosition>38</listPosition>
          <doi>10.3390/ma14030685</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172754</mtid>
          <link>/api/reference/38172754</link>
          <label>39. Kim 2019: Experimental study on micro-drilling of unidirectional carbon fiber reinforced plastic (UD-CFRP) composite using nano-solid lubrication., J Manuf Process, DOI: 10.1016/j.jmapro.2019.04.022</label>
          <listPosition>39</listPosition>
          <doi>10.1016/j.jmapro.2019.04.022</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172755</mtid>
          <link>/api/reference/38172755</link>
          <label>40. Aravind 2017: Optimization of micro-drilling parameters by Taguchi grey relational analysis., Mater Today Proc, 4, p. 4188, DOI: 10.1016/j.matpr.2017.02.121</label>
          <listPosition>40</listPosition>
          <doi>10.1016/j.matpr.2017.02.121</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172756</mtid>
          <link>/api/reference/38172756</link>
          <label>41. Balázs 2021: A review on micro-milling: recent advances and future trends., Int J Adv Manuf Technol, 112, p. 655, DOI: 10.1007/s00170-020-06445-w</label>
          <listPosition>41</listPosition>
          <doi>10.1007/s00170-020-06445-w</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172757</mtid>
          <link>/api/reference/38172757</link>
          <label>42. Snyder 2019: Literature review as a research methodology: an overview and guidelines., J Bus Res, 104, p. 333, DOI: 10.1016/j.jbusres.2019.07.039</label>
          <listPosition>42</listPosition>
          <doi>10.1016/j.jbusres.2019.07.039</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172758</mtid>
          <link>/api/reference/38172758</link>
          <label>43. Kuram 2016: Micro-machinability of injection molded polyamide 6 polymer and glass-fiber reinforced polyamide 6 composite., Compos B Eng, 88, p. 85, DOI: 10.1016/j.compositesb.2015.11.004</label>
          <listPosition>43</listPosition>
          <doi>10.1016/j.compositesb.2015.11.004</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172759</mtid>
          <link>/api/reference/38172759</link>
          <label>44. Anand 2017: Mechanistic cutting force modelling for micro-drilling of CFRP composite laminates., CIRP Journal of Manufacturing Science and Technology, 16, p. 55, DOI: 10.1016/j.cirpj.2016.07.002</label>
          <listPosition>44</listPosition>
          <doi>10.1016/j.cirpj.2016.07.002</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172760</mtid>
          <link>/api/reference/38172760</link>
          <label>45. Klocke 2009: Size effects of micro drilling in steel., Prod Eng Res Dev, 3, p. 69, DOI: 10.1007/s11740-008-0144-y</label>
          <listPosition>45</listPosition>
          <doi>10.1007/s11740-008-0144-y</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172761</mtid>
          <link>/api/reference/38172761</link>
          <label>46. Hinds 2000: Analysis of stresses in micro-drills using the finite element method., Int J Mach Tool Manufact, 40, p. 1443, DOI: 10.1016/S0890-6955(00)00007-9</label>
          <listPosition>46</listPosition>
          <doi>10.1016/S0890-6955(00)00007-9</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172762</mtid>
          <link>/api/reference/38172762</link>
          <label>47. Faraz 2009: Cutting edge rounding: an innovative tool wear criterion in drilling CFRP composite laminates., Int J Mach Tool Manufact, 49, p. 1185, DOI: 10.1016/j.ijmachtools.2009.08.002</label>
          <listPosition>47</listPosition>
          <doi>10.1016/j.ijmachtools.2009.08.002</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172763</mtid>
          <link>/api/reference/38172763</link>
          <label>48. Wojciechowski 2019: Prediction of cutting forces during micro end milling considering chip thickness accumulation., Int J Mach Tool Manufact, 147, DOI: 10.1016/j.ijmachtools.2019.103466</label>
          <listPosition>48</listPosition>
          <doi>10.1016/j.ijmachtools.2019.103466</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172764</mtid>
          <link>/api/reference/38172764</link>
          <label>49. Voss 2016: Comparison of conventional drilling and orbital drilling in machining carbon fibre reinforced plastics (CFRP)., CIRP Annals, 65, p. 137, DOI: 10.1016/j.cirp.2016.04.001</label>
          <listPosition>49</listPosition>
          <doi>10.1016/j.cirp.2016.04.001</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172765</mtid>
          <link>/api/reference/38172765</link>
          <label>50. Pereszlai 2020: A comparative analysis of wobble milling, helical milling and conventional drilling of CFRP., Int J Adv Manuf Technol, 106, p. 3913, DOI: 10.1007/s00170-019-04842-4</label>
          <listPosition>50</listPosition>
          <doi>10.1007/s00170-019-04842-4</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172766</mtid>
          <link>/api/reference/38172766</link>
          <label>51. Schulze 2012: A voxel-based kinematic simulation model for force analyses of complex milling operations such as wobble milling., Prod Eng Res Dev, 6, p. 1, DOI: 10.1007/s11740-011-0348-4</label>
          <listPosition>51</listPosition>
          <doi>10.1007/s11740-011-0348-4</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172767</mtid>
          <link>/api/reference/38172767</link>
          <label>52. Pereszlai 2021: Drilling fibre reinforced polymer composites (CFRP and GFRP): an analysis of the cutting force of the tilted helical milling process., Compos Struct, 262, DOI: 10.1016/j.compstruct.2021.113646</label>
          <listPosition>52</listPosition>
          <doi>10.1016/j.compstruct.2021.113646</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172768</mtid>
          <link>/api/reference/38172768</link>
          <label>53. Butler-Smith 2015: A study of an improved cutting mechanism of composite materials using novel design of diamond micro-core drills., Int J Mach Tool Manufact, 88, p. 175, DOI: 10.1016/j.ijmachtools.2014.10.002</label>
          <listPosition>53</listPosition>
          <doi>10.1016/j.ijmachtools.2014.10.002</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172769</mtid>
          <link>/api/reference/38172769</link>
          <label>54. Tsao 2003: The effect of chisel length and associated pilot hole on delamination when drilling composite materials., Int J Mach Tool Manufact, 43, p. 1087, DOI: 10.1016/S0890-6955(03)00127-5</label>
          <listPosition>54</listPosition>
          <doi>10.1016/S0890-6955(03)00127-5</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172770</mtid>
          <link>/api/reference/38172770</link>
          <label>55. Wang 2017: Comparative studies on the effect of pilot drillings with application to high-speed drilling of carbon fibre reinforced plastic (CFRP) composites., Int J Adv Manuf Technol, 89, p. 3243, DOI: 10.1007/s00170-016-9268-y</label>
          <listPosition>55</listPosition>
          <doi>10.1007/s00170-016-9268-y</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172771</mtid>
          <link>/api/reference/38172771</link>
          <label>56. Girot 2017: New analytical model for delamination of CFRP during drilling., J Mater Process Technol, 240, p. 332, DOI: 10.1016/j.jmatprotec.2016.10.007</label>
          <listPosition>56</listPosition>
          <doi>10.1016/j.jmatprotec.2016.10.007</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172772</mtid>
          <link>/api/reference/38172772</link>
          <label>57. Endo 2006: Small-hole drilling in engineering plastics sheet and its accuracy estimation., Int J Mach Tool Manufact, 46, p. 575, DOI: 10.1016/j.ijmachtools.2005.07.026</label>
          <listPosition>57</listPosition>
          <doi>10.1016/j.ijmachtools.2005.07.026</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172773</mtid>
          <link>/api/reference/38172773</link>
          <label>58. Baumann 2019: The effect of runout errors on process forces and tool wear., Procedia CIRP, 79, p. 39, DOI: 10.1016/j.procir.2019.02.008</label>
          <listPosition>58</listPosition>
          <doi>10.1016/j.procir.2019.02.008</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172774</mtid>
          <link>/api/reference/38172774</link>
          <label>59. Shi 2019: Materials and micro drilling of high frequency and high speed printed circuit board: a review., Int J Adv Manuf Technol, 100, p. 827, DOI: 10.1007/s00170-018-2711-5</label>
          <listPosition>59</listPosition>
          <doi>10.1007/s00170-018-2711-5</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172775</mtid>
          <link>/api/reference/38172775</link>
          <label>60. Wang 2017: Occurrence and formation mechanism of surface cavity defects during orthogonal milling of CFRP laminates., Compos B Eng, 109, p. 10, DOI: 10.1016/j.compositesb.2016.10.015</label>
          <listPosition>60</listPosition>
          <doi>10.1016/j.compositesb.2016.10.015</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172776</mtid>
          <link>/api/reference/38172776</link>
          <label>61. Geng 2019: Delamination formation, evaluation and suppression during drilling of composite laminates: a review., Compos Struct, 216, p. 168, DOI: 10.1016/j.compstruct.2019.02.099</label>
          <listPosition>61</listPosition>
          <doi>10.1016/j.compstruct.2019.02.099</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172777</mtid>
          <link>/api/reference/38172777</link>
          <label>62. István Poór 2021: A critical review of the drilling of CFRP composites: burr formation, characterisation and challenges., Compos B Eng</label>
          <listPosition>62</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172778</mtid>
          <link>/api/reference/38172778</link>
          <label>63. Suresh 2020: Composite sandwich repair using through-thickness reinforcement with robotic hand micro-drilling., Compos Struct, 248, DOI: 10.1016/j.compstruct.2020.112473</label>
          <listPosition>63</listPosition>
          <doi>10.1016/j.compstruct.2020.112473</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172779</mtid>
          <link>/api/reference/38172779</link>
          <label>64. Aurich 2009: Burrs—analysis, control and removal., CIRP Annals, 58, p. 519, DOI: 10.1016/j.cirp.2009.09.004</label>
          <listPosition>64</listPosition>
          <doi>10.1016/j.cirp.2009.09.004</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172780</mtid>
          <link>/api/reference/38172780</link>
          <label>65. Dogrusadik 2019: Experimental investigation of support plates' influences on tool wear in micro-drilling of CFRP laminates., J Manuf Process, 38, p. 214, DOI: 10.1016/j.jmapro.2019.01.018</label>
          <listPosition>65</listPosition>
          <doi>10.1016/j.jmapro.2019.01.018</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172781</mtid>
          <link>/api/reference/38172781</link>
          <label>66. John 2020: Backup support technique towards damage-free drilling of composite materials: a review., International Journal of Lightweight Materials and Manufacture, 3, p. 357, DOI: 10.1016/j.ijlmm.2020.06.001</label>
          <listPosition>66</listPosition>
          <doi>10.1016/j.ijlmm.2020.06.001</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172782</mtid>
          <link>/api/reference/38172782</link>
          <label>67. Dogrusadik 2019: Effect of support plates on the micro-drilled hole form quality in CFRP laminates., Mater Test, 61, p. 467, DOI: 10.3139/120.111343</label>
          <listPosition>67</listPosition>
          <doi>10.3139/120.111343</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172783</mtid>
          <link>/api/reference/38172783</link>
          <label>68. Geier 2018: Analysis of thrust force and characteristics of uncut fibres at non-conventional oriented drilling of unidirectional carbon fibre-reinforced plastic (UD-CFRP) composite laminates., Int J Adv Manuf Technol, 100, p. 3139, DOI: 10.1007/s00170-018-2895-8</label>
          <listPosition>68</listPosition>
          <doi>10.1007/s00170-018-2895-8</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172784</mtid>
          <link>/api/reference/38172784</link>
          <label>69. David-West 2008: Energy absorption and bending stiffness in CFRP laminates: the effect of 45° plies., Thin-Walled Struct, 46, p. 860, DOI: 10.1016/j.tws.2008.01.024</label>
          <listPosition>69</listPosition>
          <doi>10.1016/j.tws.2008.01.024</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172785</mtid>
          <link>/api/reference/38172785</link>
          <label>70. Ahmad 2009: Machining of polymer composites</label>
          <listPosition>70</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172786</mtid>
          <link>/api/reference/38172786</link>
          <label>71. Anand 2017: Mechanistic modeling of micro-drilling cutting forces., Int J Adv Manuf Technol, 88, p. 241, DOI: 10.1007/s00170-016-8632-2</label>
          <listPosition>71</listPosition>
          <doi>10.1007/s00170-016-8632-2</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172787</mtid>
          <link>/api/reference/38172787</link>
          <label>72. Geier 2022: Drilling of recycled carbon fibre–reinforced polymer (rCFRP) composites: analysis of burrs and microstructure., Int J Adv Manuf Technol</label>
          <listPosition>72</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172788</mtid>
          <link>/api/reference/38172788</link>
          <label>73. Watanabe 2008: Microdrilling for printed circuit boards (PCBs)—influence of radial run-out of microdrills on hole quality., Precis Eng, 32, p. 329, DOI: 10.1016/j.precisioneng.2008.02.004</label>
          <listPosition>73</listPosition>
          <doi>10.1016/j.precisioneng.2008.02.004</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172789</mtid>
          <link>/api/reference/38172789</link>
          <label>74. Chang 2019: High-aspect ratio mechanical microdrilling process for a microhole array of nitride ceramics., Int J Adv Manuf Technol, 100, p. 2867, DOI: 10.1007/s00170-018-2882-0</label>
          <listPosition>74</listPosition>
          <doi>10.1007/s00170-018-2882-0</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172790</mtid>
          <link>/api/reference/38172790</link>
          <label>75. Ravisubramanian 2018: Investigations into peck drilling process for large aspect ratio microholes in aluminum 6061-T6., Mater Manuf Process, 33, p. 935, DOI: 10.1080/10426914.2017.1376076</label>
          <listPosition>75</listPosition>
          <doi>10.1080/10426914.2017.1376076</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172791</mtid>
          <link>/api/reference/38172791</link>
          <label>76. Basso 2019: Micro drilling of carbon fiber reinforced polymer., Compos Struct, 228, DOI: 10.1016/j.compstruct.2019.111312</label>
          <listPosition>76</listPosition>
          <doi>10.1016/j.compstruct.2019.111312</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172792</mtid>
          <link>/api/reference/38172792</link>
          <label>77. Rahamathullah 2011: Thrust and torque analyses for different strategies adapted in microdrilling of glass-fibre-reinforced plastic., Proc IME B J Eng Manufact, 225, p. 505, DOI: 10.1243/09544054JEM2151</label>
          <listPosition>77</listPosition>
          <doi>10.1243/09544054JEM2151</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172793</mtid>
          <link>/api/reference/38172793</link>
          <label>78. Wan 2019: Cutting force modelling in machining of fiber-reinforced polymer matrix composites (PMCs): a review., Compos Appl Sci Manuf, 117, p. 34, DOI: 10.1016/j.compositesa.2018.11.003</label>
          <listPosition>78</listPosition>
          <doi>10.1016/j.compositesa.2018.11.003</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172794</mtid>
          <link>/api/reference/38172794</link>
          <label>79. Song 2022: Cutting force modeling of machining carbon fiber reinforced polymer (CFRP) composites: a review., Compos Struct, 299, DOI: 10.1016/j.compstruct.2022.116096</label>
          <listPosition>79</listPosition>
          <doi>10.1016/j.compstruct.2022.116096</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172795</mtid>
          <link>/api/reference/38172795</link>
          <label>80. Rahamathullah 2014: Mechanistic approach for prediction of forces in micro-drilling of plain and glass-reinforced epoxy sheets., Int J Adv Manuf Technol, 75, p. 1177, DOI: 10.1007/s00170-014-6202-z</label>
          <listPosition>80</listPosition>
          <doi>10.1007/s00170-014-6202-z</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172796</mtid>
          <link>/api/reference/38172796</link>
          <label>81. Wang 2004: Investigation on thrust in vibration drilling of fiber-reinforced plastics., J Mater Process Technol, 148, p. 239, DOI: 10.1016/j.jmatprotec.2003.12.019</label>
          <listPosition>81</listPosition>
          <doi>10.1016/j.jmatprotec.2003.12.019</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172797</mtid>
          <link>/api/reference/38172797</link>
          <label>82. Mustafi 2019: Experimental investigation and numerical simulation of drilling process on biaxial gfrp composites</label>
          <listPosition>82</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172798</mtid>
          <link>/api/reference/38172798</link>
          <label>83. Huang 2020: Investigation of the chip adhesion mechanisms in micro-drilling of high ceramic-content particle-filled GFRPs., Mach Sci Technol, 24, p. 861, DOI: 10.1080/10910344.2020.1765177</label>
          <listPosition>83</listPosition>
          <doi>10.1080/10910344.2020.1765177</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172799</mtid>
          <link>/api/reference/38172799</link>
          <label>84. Fu 2020: Experimental investigation on micromachining of epoxy/graphene nano platelet nanocomposites., Int J Adv Manuf Technol, 107, p. 3169, DOI: 10.1007/s00170-020-05190-4</label>
          <listPosition>84</listPosition>
          <doi>10.1007/s00170-020-05190-4</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172800</mtid>
          <link>/api/reference/38172800</link>
          <label>85. James 2019: Finite element analysis and simulation study on micromachining of hybrid composite stacks using Micro Ultrasonic Machining process., J Manuf Process, 48, p. 283, DOI: 10.1016/j.jmapro.2019.10.028</label>
          <listPosition>85</listPosition>
          <doi>10.1016/j.jmapro.2019.10.028</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172801</mtid>
          <link>/api/reference/38172801</link>
          <label>86. James 2019: Parametric study of micro ultrasonic machining process of hybrid composite stacks using finite element analysis., Procedia Manuf, 34, p. 408, DOI: 10.1016/j.promfg.2019.06.185</label>
          <listPosition>86</listPosition>
          <doi>10.1016/j.promfg.2019.06.185</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172802</mtid>
          <link>/api/reference/38172802</link>
          <label>87. Raj Kumar 2020: Investigation on drilling behavior of CFRP composites using optimization technique., Arabian J Sci Eng, 45, p. 8999, DOI: 10.1007/s13369-020-04649-6</label>
          <listPosition>87</listPosition>
          <doi>10.1007/s13369-020-04649-6</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172803</mtid>
          <link>/api/reference/38172803</link>
          <label>88. Shastri 2021: Optimization of micro drilling of CFRP composites for aerospace applications.Socio-inspired optimization methods for advanced manufacturing processes, p. 111</label>
          <listPosition>88</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172804</mtid>
          <link>/api/reference/38172804</link>
          <label>89. Dogrusadik 2022: Temperature variation depending on cutting conditions and its effects on thrust force in micro-drilling of CFRP laminates., Int J Mater Prod Technol, 65, p. 152, DOI: 10.1504/IJMPT.2022.124731</label>
          <listPosition>89</listPosition>
          <doi>10.1504/IJMPT.2022.124731</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172805</mtid>
          <link>/api/reference/38172805</link>
          <label>90. Pliusys 2022: Reducing delamination in micro drilling of carbon composite materials.Proceedings of the 38th international MATADOR conference, p. 337</label>
          <listPosition>90</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172806</mtid>
          <link>/api/reference/38172806</link>
          <label>91. Abdollah 2019: Proceedings of mechanical engineering research day 2019</label>
          <listPosition>91</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172807</mtid>
          <link>/api/reference/38172807</link>
          <label>92. Ogawa 2015: Effects of diamondcoated tools in micro-drilling of CFRP plates using a high-speed spindle., Advances in Materials and Processing Technologies, 1, p. 192, DOI: 10.1080/2374068X.2015.1118992</label>
          <listPosition>92</listPosition>
          <doi>10.1080/2374068X.2015.1118992</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172808</mtid>
          <link>/api/reference/38172808</link>
          <label>93. Ogawa 2012: Micro-drilling of CFRP plates using a high-speed spindle., Key Eng Mater, 523–524, p. 1035, DOI: 10.4028/www.scientific.net/KEM.523-524.1035</label>
          <listPosition>93</listPosition>
          <doi>10.4028/www.scientific.net/KEM.523-524.1035</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172809</mtid>
          <link>/api/reference/38172809</link>
          <label>94. Xu 2022: A critical review addressing drilling-induced damage of CFRP composites., Compos Struct, 294, DOI: 10.1016/j.compstruct.2022.115594</label>
          <listPosition>94</listPosition>
          <doi>10.1016/j.compstruct.2022.115594</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172810</mtid>
          <link>/api/reference/38172810</link>
          <label>95. Karpat 2015: Tool geometry based prediction of critical thrust force while drilling carbon fiber reinforced polymers., Adv Manuf, 3, p. 300, DOI: 10.1007/s40436-015-0129-y</label>
          <listPosition>95</listPosition>
          <doi>10.1007/s40436-015-0129-y</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172811</mtid>
          <link>/api/reference/38172811</link>
          <label>96. James 2018: Experimental study on micromachining of CFRP/Ti stacks using micro ultrasonic machining process., Int J Adv Manuf Technol, 95, p. 1539, DOI: 10.1007/s00170-017-1298-6</label>
          <listPosition>96</listPosition>
          <doi>10.1007/s00170-017-1298-6</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172812</mtid>
          <link>/api/reference/38172812</link>
          <label>97. Chapman 2019: Effects of hybridisation on the low velocity falling weight impact and flexural properties of flax-carbon/epoxy hybrid composites., Fibers, 7, p. 95, DOI: 10.3390/fib7110095</label>
          <listPosition>97</listPosition>
          <doi>10.3390/fib7110095</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172813</mtid>
          <link>/api/reference/38172813</link>
          <label>98. Yang 2021: Interface controlled micro- and macro-mechanical properties of vibration processed carbon fiber/epoxy composites., Polymers, 13, p. 2764, DOI: 10.3390/polym13162764</label>
          <listPosition>98</listPosition>
          <doi>10.3390/polym13162764</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172814</mtid>
          <link>/api/reference/38172814</link>
          <label>99. Yang 2021: Effective interlaminar reinforcing and delamination monitoring of carbon fibrous composites using a novel nano-carbon woven grid., Compos Sci Technol, 213, DOI: 10.1016/j.compscitech.2021.108959</label>
          <listPosition>99</listPosition>
          <doi>10.1016/j.compscitech.2021.108959</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172815</mtid>
          <link>/api/reference/38172815</link>
          <label>100. Xu 2022: The propagation of fibre–matrix interface debonding during CFRP edge milling process with the multi-teeth tool: a model analysis., Compos Appl Sci Manuf, 160, DOI: 10.1016/j.compositesa.2022.107050</label>
          <listPosition>100</listPosition>
          <doi>10.1016/j.compositesa.2022.107050</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172816</mtid>
          <link>/api/reference/38172816</link>
          <label>101. Gao 2022: Carbon fiber reinforced polymer in drilling: from damage mechanisms to suppression., Compos Struct, 286, DOI: 10.1016/j.compstruct.2022.115232</label>
          <listPosition>101</listPosition>
          <doi>10.1016/j.compstruct.2022.115232</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172817</mtid>
          <link>/api/reference/38172817</link>
          <label>102. Grilo 2013: Experimental delamination analyses of CFRPs using different drill geometries., Compos B Eng, 45, p. 1344, DOI: 10.1016/j.compositesb.2012.07.057</label>
          <listPosition>102</listPosition>
          <doi>10.1016/j.compositesb.2012.07.057</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172818</mtid>
          <link>/api/reference/38172818</link>
          <label>103. Sakai 2000: The pull-out and failure of a fiber bundle in a carbon fiber reinforced carbon matrix composite., Carbon, 38, p. 2123, DOI: 10.1016/S0008-6223(00)00067-1</label>
          <listPosition>103</listPosition>
          <doi>10.1016/S0008-6223(00)00067-1</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172819</mtid>
          <link>/api/reference/38172819</link>
          <label>104. Wang 2003: An experimental investigation into the orthogonal cutting of unidirectional fibre reinforced plastics., Int J Mach Tool Manufact, 43, p. 1015, DOI: 10.1016/S0890-6955(03)00090-7</label>
          <listPosition>104</listPosition>
          <doi>10.1016/S0890-6955(03)00090-7</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172820</mtid>
          <link>/api/reference/38172820</link>
          <label>105. Koplev 1983: The cutting process, chips, and cutting forces in machining CFRP., Composites, 14, p. 371, DOI: 10.1016/0010-4361(83)90157-X</label>
          <listPosition>105</listPosition>
          <doi>10.1016/0010-4361(83)90157-X</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172821</mtid>
          <link>/api/reference/38172821</link>
          <label>106. An 2019: Experimental investigation on the cutting mechanism and surface generation in orthogonal cutting of UD-CFRP laminates., Compos Struct, 230, DOI: 10.1016/j.compstruct.2019.111441</label>
          <listPosition>106</listPosition>
          <doi>10.1016/j.compstruct.2019.111441</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172822</mtid>
          <link>/api/reference/38172822</link>
          <label>107. Wang 2017: Effects of cutting edge radius and fiber cutting angle on the cutting-induced surface damage in machining of unidirectional CFRP composite laminates., Int J Adv Manuf Technol, 91, p. 3107, DOI: 10.1007/s00170-017-0023-9</label>
          <listPosition>107</listPosition>
          <doi>10.1007/s00170-017-0023-9</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172823</mtid>
          <link>/api/reference/38172823</link>
          <label>108. Inoue 1997: Influence of tool wear on internal damage in small diameter drilling in GFRP., Compos Struct, 39, p. 55, DOI: 10.1016/S0263-8223(97)00068-8</label>
          <listPosition>108</listPosition>
          <doi>10.1016/S0263-8223(97)00068-8</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172824</mtid>
          <link>/api/reference/38172824</link>
          <label>109. Venu Gopala Rao 2007: Machining of UD-GFRP composites chip formation mechanism., Compos Sci Technol, 67, p. 2271, DOI: 10.1016/j.compscitech.2007.01.025</label>
          <listPosition>109</listPosition>
          <doi>10.1016/j.compscitech.2007.01.025</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172825</mtid>
          <link>/api/reference/38172825</link>
          <label>110. Nasir 2021: Experimental investigations towards hole accuracy in micro-drilling of carbon fibre reinforced polymer., Material. Manufacturing Technology, 21, p. 381, DOI: 10.21062/mft.2021.050</label>
          <listPosition>110</listPosition>
          <doi>10.21062/mft.2021.050</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172826</mtid>
          <link>/api/reference/38172826</link>
          <label>111. Shunmugesh 2020: Taguchi grey relational analysis based optimization of micro-drilling parameters on carbon fiber reinforced plastics., Mater Today Proc, 24, p. 1994, DOI: 10.1016/j.matpr.2020.03.628</label>
          <listPosition>111</listPosition>
          <doi>10.1016/j.matpr.2020.03.628</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172827</mtid>
          <link>/api/reference/38172827</link>
          <label>112. Shunmugesh 2018: Multi-performance optimization of micro-drilling using Taguchi technique based on membership function., IJEMS, 25</label>
          <listPosition>112</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172828</mtid>
          <link>/api/reference/38172828</link>
          <label>113. Jeyaprakash 2020: Machinability study on CFRP composite using Taguchi based grey relational analysis., Mater Today Proc, 21, p. 1425, DOI: 10.1016/j.matpr.2019.08.212</label>
          <listPosition>113</listPosition>
          <doi>10.1016/j.matpr.2019.08.212</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172829</mtid>
          <link>/api/reference/38172829</link>
          <label>114. Nasir 2020: The effect of carbon fiber reinforced polymer (CFRP) micro drilling parameter on hole accuracy.Intelligent manufacturing and mechatronics, p. 333</label>
          <listPosition>114</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172830</mtid>
          <link>/api/reference/38172830</link>
          <label>115. Sonate 2018: Study of micro ultrasonic machining of CFRP/Ti stacks</label>
          <listPosition>115</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172831</mtid>
          <link>/api/reference/38172831</link>
          <label>116. Sorrentino 2018: A new method to reduce delaminations during drilling of FRP laminates by feed rate control., Compos Struct, 186, p. 154, DOI: 10.1016/j.compstruct.2017.12.005</label>
          <listPosition>116</listPosition>
          <doi>10.1016/j.compstruct.2017.12.005</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172832</mtid>
          <link>/api/reference/38172832</link>
          <label>117. Iqbal 2021: CFRP drilling under throttle and evaporative cryogenic cooling and micro-lubrication., Compos Struct, 267, DOI: 10.1016/j.compstruct.2021.113916</label>
          <listPosition>117</listPosition>
          <doi>10.1016/j.compstruct.2021.113916</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172833</mtid>
          <link>/api/reference/38172833</link>
          <label>118. Agrawal 2022: Experimental investigation on the effect of dry and multi-jet cryogenic cooling on the machinability and hole accuracy of CFRP composites., J Mater Res Technol, 18, p. 1772, DOI: 10.1016/j.jmrt.2022.03.096</label>
          <listPosition>118</listPosition>
          <doi>10.1016/j.jmrt.2022.03.096</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172834</mtid>
          <link>/api/reference/38172834</link>
          <label>119. Rawat 2009: Wear mechanisms and tool life management of WC–Co drills during dry high speed drilling of woven carbon fibre composites., Wear, 267, p. 1022, DOI: 10.1016/j.wear.2009.01.031</label>
          <listPosition>119</listPosition>
          <doi>10.1016/j.wear.2009.01.031</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172835</mtid>
          <link>/api/reference/38172835</link>
          <label>120. Wang 2013: Tool wear of coated drills in drilling CFRP., J Manuf Process, 15, p. 127, DOI: 10.1016/j.jmapro.2012.09.019</label>
          <listPosition>120</listPosition>
          <doi>10.1016/j.jmapro.2012.09.019</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172836</mtid>
          <link>/api/reference/38172836</link>
          <label>121. Xu 2019: An investigation of drilling high-strength CFRP composites using specialized drills., Int J Adv Manuf Technol, 103, p. 3425, DOI: 10.1007/s00170-019-03753-8</label>
          <listPosition>121</listPosition>
          <doi>10.1007/s00170-019-03753-8</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172837</mtid>
          <link>/api/reference/38172837</link>
          <label>122. Xu 2021: Wear behavior of special tools in the drilling of CFRP composite laminates., Wear, DOI: 10.1016/j.wear.2021.203738</label>
          <listPosition>122</listPosition>
          <doi>10.1016/j.wear.2021.203738</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172838</mtid>
          <link>/api/reference/38172838</link>
          <label>123. Xu 2022: Machining effects of fibrous composites and related stacks for aerospace applications.Advanced composites in aerospace engineering applications, p. 109</label>
          <listPosition>123</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172839</mtid>
          <link>/api/reference/38172839</link>
          <label>124. Xu 2022: Machining of fibrous composites: recent advances and future perspectives.Mechanical and industrial engineering: historical aspects and future directions, p. 161</label>
          <listPosition>124</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172840</mtid>
          <link>/api/reference/38172840</link>
          <label>125. Huang 2021: Wear characteristics of micro-drill during ultra-high speed drilling multi-layer PCB consisting of copper foil and ceramic particle filled GFRPs., Procedia CIRP, 101, p. 326, DOI: 10.1016/j.procir.2020.10.007</label>
          <listPosition>125</listPosition>
          <doi>10.1016/j.procir.2020.10.007</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172841</mtid>
          <link>/api/reference/38172841</link>
          <label>126. Soussia 2013: Effect of coating type on dry cutting of glass/epoxy composite., Surf Coating Technol, 215, p. 413, DOI: 10.1016/j.surfcoat.2012.04.098</label>
          <listPosition>126</listPosition>
          <doi>10.1016/j.surfcoat.2012.04.098</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172842</mtid>
          <link>/api/reference/38172842</link>
          <label>127. Li 2022: Quantitative evaluation method of tool wear based on morphological characteristics of machined surfaces., Proc IME B J Eng Manufact</label>
          <listPosition>127</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172843</mtid>
          <link>/api/reference/38172843</link>
          <label>128. Xu 2020: On the analysis of temperatures, surface morphologies and tool wear in drilling CFRP/Ti6Al4V stacks under different cutting sequence strategies., Compos Struct, 234, DOI: 10.1016/j.compstruct.2019.111708</label>
          <listPosition>128</listPosition>
          <doi>10.1016/j.compstruct.2019.111708</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172844</mtid>
          <link>/api/reference/38172844</link>
          <label>129. Ismail 2011: Characterization of geometrical properties of electroplated diamond tools and estimation of its grinding performance., Wear, 271, p. 559, DOI: 10.1016/j.wear.2010.04.030</label>
          <listPosition>129</listPosition>
          <doi>10.1016/j.wear.2010.04.030</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172845</mtid>
          <link>/api/reference/38172845</link>
          <label>130. Ismail 2021: Comprehensive study on tool wear during machining of fiber-reinforced polymeric composites.Machining and machinability of fiber reinforced polymer composites, p. 129</label>
          <listPosition>130</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172846</mtid>
          <link>/api/reference/38172846</link>
          <label>131. Devillez 2004: Cutting tool crater wear measurement with white light interferometry., Wear, 256, p. 56, DOI: 10.1016/S0043-1648(03)00384-3</label>
          <listPosition>131</listPosition>
          <doi>10.1016/S0043-1648(03)00384-3</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172847</mtid>
          <link>/api/reference/38172847</link>
          <label>132. Thakre 2019: Measurements of tool wear parameters using machine vision system., Model Simulat Eng, 2019</label>
          <listPosition>132</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172848</mtid>
          <link>/api/reference/38172848</link>
          <label>133. Ashby 2010: Materials selection in mechanical design., p. 1</label>
          <listPosition>133</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172849</mtid>
          <link>/api/reference/38172849</link>
          <label>134. Ashworth 2016: Mechanical and damping properties of resin transfer moulded jute-carbon hybrid composites., Compos B Eng, 105, p. 60, DOI: 10.1016/j.compositesb.2016.08.019</label>
          <listPosition>134</listPosition>
          <doi>10.1016/j.compositesb.2016.08.019</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172850</mtid>
          <link>/api/reference/38172850</link>
          <label>135. Vázquez-Núñez 2021: Green composites and their contribution toward sustainability: a review., Polym Polym Compos, 29, p. S1588</label>
          <listPosition>135</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172851</mtid>
          <link>/api/reference/38172851</link>
          <label>136. Astakhov 2013: Cutting tool sustainability. Sustainable manufacturingp. 33</label>
          <listPosition>136</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172852</mtid>
          <link>/api/reference/38172852</link>
          <label>137. Mori 2019: Machine tool.CIRP encyclopedia of production engineering, p. 1093</label>
          <listPosition>137</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172853</mtid>
          <link>/api/reference/38172853</link>
          <label>138. Srinivasa 2009: Development and performance evaluation of miniaturised machine tool (MMT) system., Int J Nanomanufacturing, 3, p. 133, DOI: 10.1504/IJNM.2009.027055</label>
          <listPosition>138</listPosition>
          <doi>10.1504/IJNM.2009.027055</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172854</mtid>
          <link>/api/reference/38172854</link>
          <label>139. Ashworth 2019: Effects of machine stiffness and cutting tool design on the surface quality and flexural strength of edge trimmed carbon fibre reinforced polymers., Compos Appl Sci Manuf, 119, p. 88, DOI: 10.1016/j.compositesa.2019.01.019</label>
          <listPosition>139</listPosition>
          <doi>10.1016/j.compositesa.2019.01.019</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172855</mtid>
          <link>/api/reference/38172855</link>
          <label>140. Altintas 2008: Chatter stability of milling in frequency and discrete time domain., CIRP Journal of Manufacturing Science and Technology, 1, p. 35, DOI: 10.1016/j.cirpj.2008.06.003</label>
          <listPosition>140</listPosition>
          <doi>10.1016/j.cirpj.2008.06.003</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172856</mtid>
          <link>/api/reference/38172856</link>
          <label>141. Teti 2015: Advanced IT methods of signal processing and decision making for zero defect manufacturing in machining., Procedia CIRP, 28, p. 3, DOI: 10.1016/j.procir.2015.04.003</label>
          <listPosition>141</listPosition>
          <doi>10.1016/j.procir.2015.04.003</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172857</mtid>
          <link>/api/reference/38172857</link>
          <label>142. Caggiano 2016: Cloud manufacturing framework for smart monitoring of machining., Procedia CIRP, 55, p. 248, DOI: 10.1016/j.procir.2016.08.049</label>
          <listPosition>142</listPosition>
          <doi>10.1016/j.procir.2016.08.049</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172858</mtid>
          <link>/api/reference/38172858</link>
          <label>143. Cong 2014: Preliminary study on rotary ultrasonic machining of CFRP/Ti stacks., Ultrasonics, 54, p. 1594, DOI: 10.1016/j.ultras.2014.03.012</label>
          <listPosition>143</listPosition>
          <doi>10.1016/j.ultras.2014.03.012</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172859</mtid>
          <link>/api/reference/38172859</link>
          <label>144. Ghosh 2021: Developing sensor signal-based digital twins for intelligent machine tools., Journal of Industrial Information Integration, 24, DOI: 10.1016/j.jii.2021.100242</label>
          <listPosition>144</listPosition>
          <doi>10.1016/j.jii.2021.100242</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172860</mtid>
          <link>/api/reference/38172860</link>
          <label>145. Fang 2015: A force sensorless method for CFRP/Ti stack interface detection during robotic orbital drilling operations., Math Probl Eng, 2015, DOI: 10.1155/2015/952049</label>
          <listPosition>145</listPosition>
          <doi>10.1155/2015/952049</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172861</mtid>
          <link>/api/reference/38172861</link>
          <label>146. Neugebauer 2012: Acoustic emission as a tool for identifying drill position in fiber-reinforced plastic and aluminum stacks., Int J Mach Tool Manufact, 57, p. 20, DOI: 10.1016/j.ijmachtools.2012.01.013</label>
          <listPosition>146</listPosition>
          <doi>10.1016/j.ijmachtools.2012.01.013</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172862</mtid>
          <link>/api/reference/38172862</link>
          <label>147. Liao 2016: On monitoring chip formation, penetration depth and cutting malfunctions in bone micro-drilling via acoustic emission., J Mater Process Technol, 229, p. 82, DOI: 10.1016/j.jmatprotec.2015.09.016</label>
          <listPosition>147</listPosition>
          <doi>10.1016/j.jmatprotec.2015.09.016</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172863</mtid>
          <link>/api/reference/38172863</link>
          <label>148. Pardo 2020: Process signals characterisation to enable adaptive drilling of aerospace stacks., Procedia CIRP, 88, p. 479, DOI: 10.1016/j.procir.2020.05.083</label>
          <listPosition>148</listPosition>
          <doi>10.1016/j.procir.2020.05.083</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172864</mtid>
          <link>/api/reference/38172864</link>
          <label>149. Chen 2022: Experimental investigation on cavitation effect and surface quality of ultrasonic-assisted micro-hole drilling., Int J Adv Manuf Technol, 121, p. 919, DOI: 10.1007/s00170-022-09193-1</label>
          <listPosition>149</listPosition>
          <doi>10.1007/s00170-022-09193-1</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172865</mtid>
          <link>/api/reference/38172865</link>
          <label>150. O'Toole 2020: Advances in rotary ultrasonic-assisted machining., Nanomanuf Metrol, 3, p. 1, DOI: 10.1007/s41871-019-00053-3</label>
          <listPosition>150</listPosition>
          <doi>10.1007/s41871-019-00053-3</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172866</mtid>
          <link>/api/reference/38172866</link>
          <label>151. Phadnis 2012: Experimental and numerical investigations in conventional and ultrasonically assisted drilling of CFRP laminate., Procedia CIRP, 1, p. 455, DOI: 10.1016/j.procir.2012.04.081</label>
          <listPosition>151</listPosition>
          <doi>10.1016/j.procir.2012.04.081</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172867</mtid>
          <link>/api/reference/38172867</link>
          <label>152. Cong 2012: Rotary ultrasonic machining of CFRP: a comparison with twist drilling., J Reinforc Plast Compos, 31, p. 313, DOI: 10.1177/0731684411427419</label>
          <listPosition>152</listPosition>
          <doi>10.1177/0731684411427419</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172868</mtid>
          <link>/api/reference/38172868</link>
          <label>153. Impero 2018: A comparison between wet and cryogenic drilling of CFRP/Ti stacks., Mater Manuf Process, 33, p. 1354, DOI: 10.1080/10426914.2018.1453162</label>
          <listPosition>153</listPosition>
          <doi>10.1080/10426914.2018.1453162</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172869</mtid>
          <link>/api/reference/38172869</link>
          <label>154. Giasin 2021: Microstructural investigation and hole quality evaluation in S2/FM94 glass-fibre composites under dry and cryogenic conditions., J Reinforc Plast Compos, 40, p. 273, DOI: 10.1177/0731684420958479</label>
          <listPosition>154</listPosition>
          <doi>10.1177/0731684420958479</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172870</mtid>
          <link>/api/reference/38172870</link>
          <label>155. Ashworth 2019: Varying CFRP workpiece temperature during slotting: effects on surface metrics, cutting forces and chip geometry., Procedia CIRP, 85, p. 37, DOI: 10.1016/j.procir.2019.09.021</label>
          <listPosition>155</listPosition>
          <doi>10.1016/j.procir.2019.09.021</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172871</mtid>
          <link>/api/reference/38172871</link>
          <label>156. El-Hofy 2011: Factors affecting workpiece surface integrity in slotting of CFRP., Procedia Eng, 19, p. 94, DOI: 10.1016/j.proeng.2011.11.085</label>
          <listPosition>156</listPosition>
          <doi>10.1016/j.proeng.2011.11.085</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172872</mtid>
          <link>/api/reference/38172872</link>
          <label>157. Shokrani 2019: Cryogenic drilling of carbon fibre reinforced plastic with tool consideration., Procedia CIRP, 85, p. 55, DOI: 10.1016/j.procir.2019.10.008</label>
          <listPosition>157</listPosition>
          <doi>10.1016/j.procir.2019.10.008</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172873</mtid>
          <link>/api/reference/38172873</link>
          <label>158. Khanna 2019: CFRP machining on indigenously developing cryogenic machining facility: an initial study., Mater Today Proc, 18, p. 4598, DOI: 10.1016/j.matpr.2019.07.434</label>
          <listPosition>158</listPosition>
          <doi>10.1016/j.matpr.2019.07.434</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172874</mtid>
          <link>/api/reference/38172874</link>
          <label>159. Koklu 2021: The effect of cryogenic machining of S2 glass fibre composite on the hole form and dimensional tolerances., Int J Adv Manuf Technol, 115, p. 125, DOI: 10.1007/s00170-021-07150-y</label>
          <listPosition>159</listPosition>
          <doi>10.1007/s00170-021-07150-y</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172875</mtid>
          <link>/api/reference/38172875</link>
          <label>160. Seo 2021: Recent developments and challenges on machining of carbon fiber reinforced polymer composite laminates., Int J Precis Eng Manuf, 22, p. 2027, DOI: 10.1007/s12541-021-00596-w</label>
          <listPosition>160</listPosition>
          <doi>10.1007/s12541-021-00596-w</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172876</mtid>
          <link>/api/reference/38172876</link>
          <label>161. Hasan 2017: A review of modern advancements in micro drilling techniques., J Manuf Process, 29, p. 343, DOI: 10.1016/j.jmapro.2017.08.006</label>
          <listPosition>161</listPosition>
          <doi>10.1016/j.jmapro.2017.08.006</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172877</mtid>
          <link>/api/reference/38172877</link>
          <label>162. Schalk 2022: Hard coatings for cutting applications: physical vs. chemical vapor deposition and future challenges for the coatings community., Surf Coating Technol, 429, DOI: 10.1016/j.surfcoat.2021.127949</label>
          <listPosition>162</listPosition>
          <doi>10.1016/j.surfcoat.2021.127949</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172878</mtid>
          <link>/api/reference/38172878</link>
          <label>163. Aouadi 2020: Self-healing ceramic coatings that operate in extreme environments: a review., J Vac Sci Technol, 38, DOI: 10.1116/6.0000350</label>
          <listPosition>163</listPosition>
          <doi>10.1116/6.0000350</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172879</mtid>
          <link>/api/reference/38172879</link>
          <label>164. Ashworth 2022: Effects of tool coating and tool wear on the surface quality and flexural strength of slotted CFRP., Wear, 498–499</label>
          <listPosition>164</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172880</mtid>
          <link>/api/reference/38172880</link>
          <label>165. Mondelin 2010: Characterisation of friction properties between a laminated carbon fibres reinforced polymer and a monocrystalline diamond under dry or lubricated conditions., Tribol Int, 43, p. 1665, DOI: 10.1016/j.triboint.2010.03.015</label>
          <listPosition>165</listPosition>
          <doi>10.1016/j.triboint.2010.03.015</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172881</mtid>
          <link>/api/reference/38172881</link>
          <label>166. Voss 2017: Cutting process tribometer experiments for evaluation of friction coefficient close to a CFRP machining operation., Procedia CIRP, 66, p. 204, DOI: 10.1016/j.procir.2017.03.225</label>
          <listPosition>166</listPosition>
          <doi>10.1016/j.procir.2017.03.225</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172882</mtid>
          <link>/api/reference/38172882</link>
          <label>167. Hocheng 2005: The path towards delamination-free drilling of composite materials., J Mater Process Technol, 167, p. 251, DOI: 10.1016/j.jmatprotec.2005.06.039</label>
          <listPosition>167</listPosition>
          <doi>10.1016/j.jmatprotec.2005.06.039</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172883</mtid>
          <link>/api/reference/38172883</link>
          <label>168. Singh 2016: Rotary ultrasonic machining: a review., Mater Manuf Process, 31, p. 1795, DOI: 10.1080/10426914.2016.1140188</label>
          <listPosition>168</listPosition>
          <doi>10.1080/10426914.2016.1140188</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172884</mtid>
          <link>/api/reference/38172884</link>
          <label>169. Cadorin 2015: Wear signature on hole defects as a function of cutting tool material for drilling 3D interlock composite., Wear, 332–333, p. 742, DOI: 10.1016/j.wear.2015.01.019</label>
          <listPosition>169</listPosition>
          <doi>10.1016/j.wear.2015.01.019</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172885</mtid>
          <link>/api/reference/38172885</link>
          <label>170. Ranjan 2020: Artificial intelligence-based hole quality prediction in micro-drilling using multiple sensors., Sensors, 20, p. 885, DOI: 10.3390/s20030885</label>
          <listPosition>170</listPosition>
          <doi>10.3390/s20030885</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172886</mtid>
          <link>/api/reference/38172886</link>
          <label>171. Azmi 2015: Monitoring of tool wear using measured machining forces and neuro-fuzzy modelling approaches during machining of GFRP composites., Adv Eng Software, 82, p. 53, DOI: 10.1016/j.advengsoft.2014.12.010</label>
          <listPosition>171</listPosition>
          <doi>10.1016/j.advengsoft.2014.12.010</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172887</mtid>
          <link>/api/reference/38172887</link>
          <label>172. Huang 2011: Study of spindle vibration signals for tool breakage monitoring in micro-drilling., 2011 9th World Congress on Intelligent Control and Automation, p. 1130, DOI: 10.1109/WCICA.2011.5970693</label>
          <listPosition>172</listPosition>
          <doi>10.1109/WCICA.2011.5970693</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172888</mtid>
          <link>/api/reference/38172888</link>
          <label>173. Caggiano 2018: Multiple sensor monitoring for tool wear forecast in drilling of CFRP/CFRP stacks with traditional and innovative drill bits., Procedia CIRP, 67, p. 404, DOI: 10.1016/j.procir.2017.12.233</label>
          <listPosition>173</listPosition>
          <doi>10.1016/j.procir.2017.12.233</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172889</mtid>
          <link>/api/reference/38172889</link>
          <label>174. Malekian 2009: Tool wear monitoring of micro-milling operations., J Mater Process Technol, 209, p. 4903, DOI: 10.1016/j.jmatprotec.2009.01.013</label>
          <listPosition>174</listPosition>
          <doi>10.1016/j.jmatprotec.2009.01.013</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172890</mtid>
          <link>/api/reference/38172890</link>
          <label>175. Beruvides 2013: Sensoring systems and signal analysis to monitor tool wear in microdrilling operations on a sintered tungsten–copper composite material., Sensor Actuator Phys, 199, p. 165, DOI: 10.1016/j.sna.2013.05.021</label>
          <listPosition>175</listPosition>
          <doi>10.1016/j.sna.2013.05.021</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172891</mtid>
          <link>/api/reference/38172891</link>
          <label>176. Yang 2022: Milling cutter wear prediction method under variable working conditions based on LRCN., Int J Adv Manuf Technol, 121, p. 2647, DOI: 10.1007/s00170-022-09416-5</label>
          <listPosition>176</listPosition>
          <doi>10.1007/s00170-022-09416-5</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172892</mtid>
          <link>/api/reference/38172892</link>
          <label>177. Saleem 2013: Investigating the effect of machining processes on the mechanical behavior of composite plates with circular holes., Compos Appl Sci Manuf, 55, p. 169, DOI: 10.1016/j.compositesa.2013.09.002</label>
          <listPosition>177</listPosition>
          <doi>10.1016/j.compositesa.2013.09.002</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172893</mtid>
          <link>/api/reference/38172893</link>
          <label>178. Wisnom 2010: Scaling effects in notched composites., J Compos Mater, 44, p. 195, DOI: 10.1177/0021998309339865</label>
          <listPosition>178</listPosition>
          <doi>10.1177/0021998309339865</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172894</mtid>
          <link>/api/reference/38172894</link>
          <label>179. Monoranu 2019: A comparative study of the effects of milling and abrasive water jet cutting on flexural performance of CFRP., Procedia CIRP, 85, p. 277, DOI: 10.1016/j.procir.2019.09.036</label>
          <listPosition>179</listPosition>
          <doi>10.1016/j.procir.2019.09.036</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172895</mtid>
          <link>/api/reference/38172895</link>
          <label>180. Dharan 2000: Machining parameters for an intelligent machining system for composite laminates., Int J Mach Tool Manufact, 40, p. 415, DOI: 10.1016/S0890-6955(99)00065-6</label>
          <listPosition>180</listPosition>
          <doi>10.1016/S0890-6955(99)00065-6</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172896</mtid>
          <link>/api/reference/38172896</link>
          <label>181. Singh 2008: Drilling of uni-directional glass fiber reinforced plastics: experimental and finite element study., Mater Des, 29, p. 546, DOI: 10.1016/j.matdes.2007.01.029</label>
          <listPosition>181</listPosition>
          <doi>10.1016/j.matdes.2007.01.029</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172897</mtid>
          <link>/api/reference/38172897</link>
          <label>182. Campos Rubio 2008: Effects of high speed in the drilling of glass fibre reinforced plastic: evaluation of the delamination factor., Int J Mach Tool Manufact, 48, p. 715, DOI: 10.1016/j.ijmachtools.2007.10.015</label>
          <listPosition>182</listPosition>
          <doi>10.1016/j.ijmachtools.2007.10.015</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172898</mtid>
          <link>/api/reference/38172898</link>
          <label>183. Zitoune 2015: 9 - machining and drilling processes in composites manufacture: damage and material integrity.Advances in composites manufacturing and process design, p. 177</label>
          <listPosition>183</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172899</mtid>
          <link>/api/reference/38172899</link>
          <label>184. Hejjaji 2019: Influence of controlled depth abrasive water jet milling on the fatigue behavior of carbon/epoxy composites., Compos Appl Sci Manuf, 121, p. 397, DOI: 10.1016/j.compositesa.2019.03.045</label>
          <listPosition>184</listPosition>
          <doi>10.1016/j.compositesa.2019.03.045</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172900</mtid>
          <link>/api/reference/38172900</link>
          <label>185. Nguyen-Dinh 2020: Influence of machining damage generated during trimming of CFRP composite on the compressive strength., J Compos Mater, 54, p. 1413, DOI: 10.1177/0021998319883335</label>
          <listPosition>185</listPosition>
          <doi>10.1177/0021998319883335</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172901</mtid>
          <link>/api/reference/38172901</link>
          <label>186. Nguyen-Dinh 2019: Surface integrity while trimming of composite structures: X-ray tomography analysis., Compos Struct, 210, p. 735, DOI: 10.1016/j.compstruct.2018.12.006</label>
          <listPosition>186</listPosition>
          <doi>10.1016/j.compstruct.2018.12.006</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172902</mtid>
          <link>/api/reference/38172902</link>
          <label>187. Trellu 2020: Combined loadings after medium velocity impact on large CFRP laminate plates: tests and enhanced computation/testing dialogue., Compos Sci Technol, 196, DOI: 10.1016/j.compscitech.2020.108194</label>
          <listPosition>187</listPosition>
          <doi>10.1016/j.compscitech.2020.108194</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172903</mtid>
          <link>/api/reference/38172903</link>
          <label>188. Cepero-Mejías 2020: Review of recent developments and induced damage assessment in the modelling of the machining of long fibre reinforced polymer composites., Compos Struct, 240, DOI: 10.1016/j.compstruct.2020.112006</label>
          <listPosition>188</listPosition>
          <doi>10.1016/j.compstruct.2020.112006</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172904</mtid>
          <link>/api/reference/38172904</link>
          <label>189. Nafems</label>
          <listPosition>189</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172905</mtid>
          <link>/api/reference/38172905</link>
          <label>190. Uk Research and Innovation. Certification for design - reshaping the testing pyramid [n.d].</label>
          <listPosition>190</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172906</mtid>
          <link>/api/reference/38172906</link>
          <label>191. en.pdf [n.d].</label>
          <listPosition>191</listPosition>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172907</mtid>
          <link>/api/reference/38172907</link>
          <label>192. Monoranu 2021: Chip formation mechanism during orthogonal cutting of rubber microparticles and silica nanoparticles modified epoxy polymers., Procedia CIRP, 103, p. 176, DOI: 10.1016/j.procir.2021.10.028</label>
          <listPosition>192</listPosition>
          <doi>10.1016/j.procir.2021.10.028</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172908</mtid>
          <link>/api/reference/38172908</link>
          <label>193. Monoranu 2022: The effect of particle reinforcements on chip formation and machining induced damage of modified epoxy carbon fibre reinforced polymers (CFRPs)., Compos Appl Sci Manuf, 154, DOI: 10.1016/j.compositesa.2021.106793</label>
          <listPosition>193</listPosition>
          <doi>10.1016/j.compositesa.2021.106793</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172909</mtid>
          <link>/api/reference/38172909</link>
          <label>194. Garcea 2017: Mapping fibre failure in situ in carbon fibre reinforced polymers by fast synchrotron X-ray computed tomography., Compos Sci Technol, 149, p. 81, DOI: 10.1016/j.compscitech.2017.06.006</label>
          <listPosition>194</listPosition>
          <doi>10.1016/j.compscitech.2017.06.006</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172910</mtid>
          <link>/api/reference/38172910</link>
          <label>195. Ashworth 2020: Epifluorescent microscopy of edge-trimmed carbon fibre-reinforced polymers: an alternative to computed tomography scanning., Adv Compos Lett, 29, DOI: 10.1177/2633366X20924676</label>
          <listPosition>195</listPosition>
          <doi>10.1177/2633366X20924676</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172911</mtid>
          <link>/api/reference/38172911</link>
          <label>196. Alhadeff 2019: Protocol for tool wear measurement in micro-milling., Wear, 420–421, p. 54, DOI: 10.1016/j.wear.2018.11.018</label>
          <listPosition>196</listPosition>
          <doi>10.1016/j.wear.2018.11.018</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172912</mtid>
          <link>/api/reference/38172912</link>
          <label>197. Merino-Pérez 2015: On the temperatures developed in CFRP drilling using uncoated WC-Co tools Part I: workpiece constituents, cutting speed and heat dissipation., Compos Struct, 123, p. 161, DOI: 10.1016/j.compstruct.2014.12.033</label>
          <listPosition>197</listPosition>
          <doi>10.1016/j.compstruct.2014.12.033</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
        <reference>
          <otype>Reference</otype>
          <mtid>38172913</mtid>
          <link>/api/reference/38172913</link>
          <label>198. Merino-Pérez 2015: On the temperatures developed in CFRP drilling using uncoated WC-Co tools Part II: nanomechanical study of thermally aged CFRP composites., Compos Struct, 123, p. 30, DOI: 10.1016/j.compstruct.2014.12.035</label>
          <listPosition>198</listPosition>
          <doi>10.1016/j.compstruct.2014.12.035</doi>
          <published>false</published>
          <snippet>true</snippet>
        </reference>
      </references>
      <link>/api/publication/33628631</link>
      <label>Geier Norbert et al. A critical review on mechanical micro-drilling of glass and carbon fibre reinforced polymer (GFRP and CFRP) composites. (2023) COMPOSITES PART B-ENGINEERING 1359-8368 1879-1069 254</label><template>&lt;div class=&quot;JournalArticle Publication short-list&quot;&gt; &lt;div class=&quot;authors&quot;&gt; &lt;span class=&quot;author-name&quot; mtid=&quot;10056359&quot;&gt; &lt;a href=&quot;/gui2/?type=authors&amp;mode=browse&amp;sel=10056359&quot; target=&quot;_blank&quot;&gt;Geier, Norbert ✉&lt;/a&gt; &lt;/span&gt; &lt;span class=&quot;author-type&quot;&gt; &lt;/span&gt; ; &lt;span class=&quot;author-name&quot; &gt; Patra, Karali &lt;/span&gt; &lt;span class=&quot;author-type&quot;&gt; &lt;/span&gt; ; &lt;span class=&quot;author-name&quot; &gt; Anand, Ravi Shankar &lt;/span&gt; &lt;span class=&quot;author-type&quot;&gt; &lt;/span&gt; ; &lt;span class=&quot;author-name&quot; &gt; Ashworth, Sam &lt;/span&gt; &lt;span class=&quot;author-type&quot;&gt; &lt;/span&gt; ; &lt;span class=&quot;author-name&quot; mtid=&quot;10058765&quot;&gt; &lt;a href=&quot;/gui2/?type=authors&amp;mode=browse&amp;sel=10058765&quot; target=&quot;_blank&quot;&gt;Balázs, Barnabás Zoltán&lt;/a&gt; &lt;/span&gt; &lt;span class=&quot;author-type&quot;&gt; &lt;/span&gt; ; &lt;span class=&quot;author-name&quot; mtid=&quot;10082694&quot;&gt; &lt;a href=&quot;/gui2/?type=authors&amp;mode=browse&amp;sel=10082694&quot; target=&quot;_blank&quot;&gt;Lukács, Tamás&lt;/a&gt; &lt;/span&gt; &lt;span class=&quot;author-type&quot;&gt; &lt;/span&gt; ; &lt;span class=&quot;author-name&quot; mtid=&quot;10082692&quot;&gt; &lt;a href=&quot;/gui2/?type=authors&amp;mode=browse&amp;sel=10082692&quot; target=&quot;_blank&quot;&gt;Magyar, Gergely&lt;/a&gt; &lt;/span&gt; &lt;span class=&quot;author-type&quot;&gt; &lt;/span&gt; ; &lt;span class=&quot;author-name&quot; mtid=&quot;10035283&quot;&gt; &lt;a href=&quot;/gui2/?type=authors&amp;mode=browse&amp;sel=10035283&quot; target=&quot;_blank&quot;&gt;Tamás-Bényei, Péter&lt;/a&gt; &lt;/span&gt; &lt;span class=&quot;author-type&quot;&gt; &lt;/span&gt; ; &lt;span class=&quot;author-name&quot; &gt; Xu, Jinyang &lt;/span&gt; &lt;span class=&quot;author-type&quot;&gt; &lt;/span&gt; ; &lt;span class=&quot;author-name&quot; &gt; Davim, J Paulo &lt;/span&gt; &lt;span class=&quot;author-type&quot;&gt; &lt;/span&gt; &lt;/div &gt;&lt;div class=&quot;title&quot;&gt;&lt;a href=&quot;/gui2/?mode=browse&amp;params=publication;33628631&quot; mtid=&quot;33628631&quot; target=&quot;_blank&quot;&gt;A critical review on mechanical micro-drilling of glass and carbon fibre reinforced polymer (GFRP and CFRP) composites&lt;/a&gt;&lt;/div&gt; &lt;div class=&quot;pub-info&quot;&gt; &lt;span class=&quot;journal-title&quot;&gt;COMPOSITES PART B-ENGINEERING&lt;/span&gt; &lt;span class=&quot;journal-volume&quot;&gt;254&lt;/span&gt; &lt;span class=&quot;page&quot;&gt; Paper: 110589 , 21 p. &lt;/span&gt; &lt;span class=&quot;year&quot;&gt;(2023)&lt;/span&gt; &lt;/div&gt; &lt;div class=&quot;pub-end&quot;&gt;&lt;div class=&quot;identifier-list&quot;&gt; &lt;span class=&quot;identifiers&quot;&gt; &lt;span class=&quot;id identifier oa_none&quot; title=&quot;none&quot;&gt; &lt;a style=&quot;color:blue&quot; title=&quot;10.1016/j.compositesb.2023.110589&quot; target=&quot;_blank&quot; href=&quot;https://doi.org/10.1016/j.compositesb.2023.110589&quot;&gt; DOI &lt;/a&gt; &lt;/span&gt; &lt;span class=&quot;id identifier oa_none&quot; title=&quot;none&quot;&gt; &lt;a style=&quot;color:blue&quot; title=&quot;000994536600001&quot; target=&quot;_blank&quot; href=&quot;https://www.webofscience.com/wos/woscc/full-record/000994536600001&quot;&gt; WoS &lt;/a&gt; &lt;/span&gt; &lt;span class=&quot;id identifier oa_GOLD&quot; title=&quot; Gold &quot;&gt; &lt;a style=&quot;color:black&quot; title=&quot;162348&quot; target=&quot;_blank&quot; href=&quot;http://real.mtak.hu/162348&quot;&gt; REAL &lt;/a&gt; &lt;/span&gt; &lt;span class=&quot;id identifier oa_none&quot; title=&quot;none&quot;&gt; &lt;a style=&quot;color:blue&quot; title=&quot;85147606474&quot; target=&quot;_blank&quot; href=&quot;http://www.scopus.com/record/display.url?origin=inward&amp;eid=2-s2.0-85147606474&quot;&gt; Scopus &lt;/a&gt; &lt;/span&gt; &lt;span class=&quot;id identifier oa_none&quot; title=&quot;none&quot;&gt; &lt;a style=&quot;color:black&quot; title=&quot;https://linkinghub.elsevier.com/retrieve/pii/S1359836823000926&quot; target=&quot;_blank&quot; href=&quot;https://linkinghub.elsevier.com/retrieve/pii/S1359836823000926&quot;&gt; Other URL &lt;/a&gt; &lt;/span&gt; &lt;span class=&quot;id identifier oa_none&quot; title=&quot;none&quot;&gt; &lt;a style=&quot;color:black&quot; title=&quot;https://phd.gpk.bme.hu/pub/s/j/l9/t3?3001787&quot; target=&quot;_blank&quot; href=&quot;https://phd.gpk.bme.hu/pub/s/j/l9/t3?3001787&quot;&gt; Other URL &lt;/a&gt; &lt;/span&gt; &lt;/span&gt; &lt;/div&gt; &lt;div class=&quot;short-pub-prop-list&quot;&gt; &lt;span class=&quot;short-pub-mtid&quot;&gt; Publication:33628631 &lt;/span&gt; &lt;span class=&quot;status-holder&quot;&gt;&lt;span class=&quot;status-data status-VALIDATED&quot;&gt; Validated &lt;/span&gt;&lt;/span&gt; &lt;span class=&quot;pub-core&quot;&gt;Core Citing &lt;/span&gt; &lt;span class=&quot;pub-type&quot;&gt;Journal Article (Survey paper ) &lt;/span&gt; &lt;!-- &amp;&amp; !record.category.scientific --&gt; &lt;span class=&quot;pub-category&quot;&gt;Scientific&lt;/span&gt; &lt;div class=&quot;publication-citation&quot; style=&quot;margin-left: 0.5cm;&quot;&gt; &lt;span title=&quot;&quot; class=&quot;citingPub-count&quot;&gt;Citing papers: 67&lt;/span&gt; | Independent citation: 61 | Self citation: 6 | Unknown citation: 0 | Number of citations in WoS: 65 | Number of citations in Scopus:&amp;nbsp;27 | WoS/Scopus assigned:&amp;nbsp;65 | Number of citations with DOI:&amp;nbsp;66 &lt;/div&gt; &lt;/div&gt; &lt;/div&gt; &lt;/div&gt;</template><template2>&lt;div class=&quot;JournalArticle Publication long-list&quot;&gt;
&lt;div class=&quot;authors&quot;&gt;
	&lt;img title=&quot;Forrásközlemény&quot; style=&quot;float: left&quot; src=&quot;/frontend/resources/grid/publication-core-icon.png&quot;&gt;
	&lt;img title=&quot;Idézőközlemény&quot; style=&quot;float: left&quot; src=&quot;/frontend/resources/grid/publication-citation-icon.png&quot;&gt;

		&lt;div class=&quot;autype autype0&quot;&gt;				&lt;span class=&quot;author-name&quot; mtid=&quot;10056359&quot;&gt;&lt;a 
																				   href=&quot;/gui2/?type=authors&amp;mode=browse&amp;sel=10056359&quot; target=&quot;_blank&quot;&gt;Geier Norbert ✉
            (&lt;span class=&quot;authorship-author-name&quot;&gt;Geier Norbert&lt;/span&gt;
            &lt;span class=&quot;authorAux-mtmt&quot;&gt; Gyártástechnológia&lt;/span&gt;)
			&lt;/a&gt;
    &lt;/span&gt;
&lt;span class=&quot;author-affil&quot;&gt;&lt;span title=&quot;Óbuda University&quot;&gt;ÓU&lt;/span&gt;/Bánki Donát Faculty of Mechanical Engineering and Safety Technology; &lt;span title=&quot;Budapest University of Technology and Economics&quot;&gt;BUTE&lt;/span&gt;/&lt;span title=&quot;Faculty of Mechanical Engineering&quot;&gt;FME&lt;/span&gt;/Department of Manufacturing Science and Engineering&lt;/span&gt;
;&amp;nbsp;&amp;nbsp;&amp;nbsp;
							&lt;span class=&quot;author-name&quot; &gt;Patra Karali
    &lt;/span&gt;
;&amp;nbsp;&amp;nbsp;&amp;nbsp;
							&lt;span class=&quot;author-name&quot; &gt;Anand Ravi Shankar
    &lt;/span&gt;
;&amp;nbsp;&amp;nbsp;&amp;nbsp;
							&lt;span class=&quot;author-name&quot; &gt;Ashworth Sam
    &lt;/span&gt;
;&amp;nbsp;&amp;nbsp;&amp;nbsp;
							&lt;span class=&quot;author-name&quot; mtid=&quot;10058765&quot;&gt;&lt;a 
																				   href=&quot;/gui2/?type=authors&amp;mode=browse&amp;sel=10058765&quot; target=&quot;_blank&quot;&gt;Balázs Barnabás Zoltán
            (&lt;span class=&quot;authorship-author-name&quot;&gt;Balázs Barnabás Zoltán&lt;/span&gt;
            &lt;span class=&quot;authorAux-mtmt&quot;&gt; Gyártástechnológia&lt;/span&gt;)
			&lt;/a&gt;
    &lt;/span&gt;
&lt;span class=&quot;author-affil&quot;&gt;&lt;span title=&quot;Budapest University of Technology and Economics&quot;&gt;BUTE&lt;/span&gt;/&lt;span title=&quot;Faculty of Mechanical Engineering&quot;&gt;FME&lt;/span&gt;/Department of Manufacturing Science and Engineering&lt;/span&gt;
;&amp;nbsp;&amp;nbsp;&amp;nbsp;
							&lt;span class=&quot;author-name&quot; mtid=&quot;10082694&quot;&gt;&lt;a 
																				   href=&quot;/gui2/?type=authors&amp;mode=browse&amp;sel=10082694&quot; target=&quot;_blank&quot;&gt;Lukács Tamás
            (&lt;span class=&quot;authorship-author-name&quot;&gt;Lukács Tamás&lt;/span&gt;
            &lt;span class=&quot;authorAux-mtmt&quot;&gt; Gyártástechnológia&lt;/span&gt;)
			&lt;/a&gt;
    &lt;/span&gt;
&lt;span class=&quot;author-affil&quot;&gt;&lt;span title=&quot;Budapest University of Technology and Economics&quot;&gt;BUTE&lt;/span&gt;/&lt;span title=&quot;Faculty of Mechanical Engineering&quot;&gt;FME&lt;/span&gt;/Department of Manufacturing Science and Engineering&lt;/span&gt;
;&amp;nbsp;&amp;nbsp;&amp;nbsp;
							&lt;span class=&quot;author-name&quot; mtid=&quot;10082692&quot;&gt;&lt;a 
																				   href=&quot;/gui2/?type=authors&amp;mode=browse&amp;sel=10082692&quot; target=&quot;_blank&quot;&gt;Magyar Gergely
            (&lt;span class=&quot;authorship-author-name&quot;&gt;Magyar Gergely&lt;/span&gt;
            &lt;span class=&quot;authorAux-mtmt&quot;&gt; Gyártástechnológia&lt;/span&gt;)
			&lt;/a&gt;
    &lt;/span&gt;
&lt;span class=&quot;author-affil&quot;&gt;&lt;span title=&quot;Budapest University of Technology and Economics&quot;&gt;BUTE&lt;/span&gt;/&lt;span title=&quot;Faculty of Mechanical Engineering&quot;&gt;FME&lt;/span&gt;/Department of Manufacturing Science and Engineering&lt;/span&gt;
;&amp;nbsp;&amp;nbsp;&amp;nbsp;
							&lt;span class=&quot;author-name&quot; mtid=&quot;10035283&quot;&gt;&lt;a 
																				   href=&quot;/gui2/?type=authors&amp;mode=browse&amp;sel=10035283&quot; target=&quot;_blank&quot;&gt;Tamás-Bényei Péter
            (&lt;span class=&quot;authorship-author-name&quot;&gt;Tamás-Bényei Péter&lt;/span&gt;
            &lt;span class=&quot;authorAux-mtmt&quot;&gt; Polimer Anyagtudomány&lt;/span&gt;)
			&lt;/a&gt;
    &lt;/span&gt;
&lt;span class=&quot;author-affil&quot;&gt;&lt;span title=&quot;Budapest University of Technology and Economics&quot;&gt;BUTE&lt;/span&gt;/&lt;span title=&quot;Faculty of Mechanical Engineering&quot;&gt;FME&lt;/span&gt;/Department of Polymer Engineering; &lt;span title=&quot;Budapest University of Technology and Economics&quot;&gt;BUTE&lt;/span&gt;/&lt;span title=&quot;Faculty of Mechanical Engineering&quot;&gt;FME&lt;/span&gt;/&lt;span title=&quot;Department of Polymer Engineering&quot;&gt;DPE&lt;/span&gt;/ELKH-BME Composite Science and Technology Research Group&lt;/span&gt;
;&amp;nbsp;&amp;nbsp;&amp;nbsp;
							&lt;span class=&quot;author-name&quot; &gt;Xu Jinyang
    &lt;/span&gt;
;&amp;nbsp;&amp;nbsp;&amp;nbsp;
							&lt;span class=&quot;author-name&quot; &gt;Davim J Paulo
    &lt;/span&gt;

				    &lt;/div&gt;
&lt;/div&gt;
&lt;div class=&quot;title&quot;&gt;&lt;a href=&quot;/gui2/?mode=browse&amp;params=publication;33628631&quot; target=&quot;_blank&quot;&gt;A critical review on mechanical micro-drilling of glass and carbon fibre reinforced polymer (GFRP and CFRP) composites&lt;/a&gt;&lt;/div&gt;    &lt;div&gt;		&lt;span class=&quot;journal-title&quot;&gt;COMPOSITES PART B-ENGINEERING&lt;/span&gt;

        &lt;span class=&quot;journal-issn&quot;&gt;(&lt;a target=&quot;_blank&quot; href=&quot;https://portal.issn.org/resource/ISSN/1359-8368&quot;&gt;1359-8368&lt;/a&gt; &lt;a target=&quot;_blank&quot; href=&quot;https://portal.issn.org/resource/ISSN/1879-1069&quot;&gt;1879-1069&lt;/a&gt;)&lt;/span&gt;:
		&lt;span class=&quot;journal-volume&quot;&gt;254&lt;/span&gt; 
&lt;span class=&quot;page&quot;&gt;
		Paper 110589.
	 21 p. 
&lt;/span&gt;		 &lt;span class=&quot;year&quot;&gt;(2023)&lt;/span&gt;  
    &lt;/div&gt;
&lt;div class=&quot;pub-footer&quot;&gt;
    

	&lt;span class=&quot;language&quot; xmlns=&quot;http://www.w3.org/1999/html&quot;&gt;Language:
			English
		 |  &lt;/span&gt;

	&lt;span class=&quot;identifiers&quot;&gt;
						&lt;span class=&quot;id identifier oa_none&quot; title=&quot;none&quot;&gt;
							
							&lt;a style=&quot;color:blue&quot; title=&quot;10.1016/j.compositesb.2023.110589&quot; target=&quot;_blank&quot; href=&quot;https://doi.org/10.1016/j.compositesb.2023.110589&quot;&gt;
									DOI
							&lt;/a&gt;
						&lt;/span&gt;
						&lt;span class=&quot;id identifier oa_none&quot; title=&quot;none&quot;&gt;
							
							&lt;a style=&quot;color:blue&quot; title=&quot;000994536600001&quot; target=&quot;_blank&quot; href=&quot;https://www.webofscience.com/wos/woscc/full-record/000994536600001&quot;&gt;
									WoS
							&lt;/a&gt;
						&lt;/span&gt;
						&lt;span class=&quot;id identifier oa_GOLD&quot; title=&quot;	Gold
&quot;&gt;
							
							&lt;a style=&quot;color:black&quot; title=&quot;162348&quot; target=&quot;_blank&quot; href=&quot;http://real.mtak.hu/162348&quot;&gt;
									REAL
							&lt;/a&gt;
						&lt;/span&gt;
						&lt;span class=&quot;id identifier oa_none&quot; title=&quot;none&quot;&gt;
							
							&lt;a style=&quot;color:blue&quot; title=&quot;85147606474&quot; target=&quot;_blank&quot; href=&quot;http://www.scopus.com/record/display.url?origin=inward&amp;eid=2-s2.0-85147606474&quot;&gt;
									Scopus
							&lt;/a&gt;
						&lt;/span&gt;
						&lt;span class=&quot;id identifier oa_none&quot; title=&quot;none&quot;&gt;
							
							&lt;a style=&quot;color:black&quot; title=&quot;https://linkinghub.elsevier.com/retrieve/pii/S1359836823000926&quot; target=&quot;_blank&quot; href=&quot;https://linkinghub.elsevier.com/retrieve/pii/S1359836823000926&quot;&gt;
									Other URL
							&lt;/a&gt;
						&lt;/span&gt;
						&lt;span class=&quot;id identifier oa_none&quot; title=&quot;none&quot;&gt;
							
							&lt;a style=&quot;color:black&quot; title=&quot;https://phd.gpk.bme.hu/pub/s/j/l9/t3?3001787&quot; target=&quot;_blank&quot; href=&quot;https://phd.gpk.bme.hu/pub/s/j/l9/t3?3001787&quot;&gt;
									Other URL
							&lt;/a&gt;
						&lt;/span&gt;
	&lt;/span&gt;


	&lt;OnlyViewableByAuthor&gt;&lt;div class=&quot;ratings&quot;&gt;
				&lt;div class=&quot;journal-subject&quot;&gt;Journal subject: Scopus - Ceramics and Composites&amp;nbsp;&amp;nbsp;&amp;nbsp;Rank:&amp;nbsp;D1&lt;/div&gt;
				&lt;div class=&quot;journal-subject&quot;&gt;Journal subject: Scopus - Industrial and Manufacturing Engineering&amp;nbsp;&amp;nbsp;&amp;nbsp;Rank:&amp;nbsp;D1&lt;/div&gt;
				&lt;div class=&quot;journal-subject&quot;&gt;Journal subject: Scopus - Mechanical Engineering&amp;nbsp;&amp;nbsp;&amp;nbsp;Rank:&amp;nbsp;D1&lt;/div&gt;
				&lt;div class=&quot;journal-subject&quot;&gt;Journal subject: Scopus - Mechanics of Materials&amp;nbsp;&amp;nbsp;&amp;nbsp;Rank:&amp;nbsp;D1&lt;/div&gt;
    &lt;/div&gt;&lt;/OnlyViewableByAuthor&gt;


	&lt;div class=&quot;publication-citation&quot; style=&quot;margin-left: 0.5cm;&quot;&gt;
		&lt;span title=&quot;&quot; class=&quot;citingPub-count&quot;&gt;Citing papers: 67&lt;/span&gt;
		| Independent citation: 61
		| Self citation: 6
		| Unknown citation: 0
		| Number of citations in WoS: 65 
		|  Number of citations in Scopus:&amp;nbsp;27 
		|  WoS/Scopus assigned:&amp;nbsp;65 
		|  Number of citations with DOI:&amp;nbsp;66 
		
	&lt;/div&gt;
    
    
	&lt;div class=&quot;publication-citation&quot;&gt;
		&lt;a target=&quot;_blank&quot; href=&quot;/api/publication?cond=citations.related;eq;33628631&amp;sort=publishedYear,desc&amp;sort=title&quot;&gt;
			Number of cited publications: 11
		&lt;/a&gt;
	&lt;/div&gt;



    &lt;div class=&quot;mtid&quot;&gt;&lt;span class=&quot;long-pub-mtid&quot;&gt;Publication: 33628631&lt;/span&gt;
    | &lt;span class=&quot;status-data status-VALIDATED&quot;&gt; 	Validated
  &lt;/span&gt;
        
	
	
Core	 Citing
	
	
    | &lt;span class=&quot;type-subtype&quot;&gt;Journal Article
			( Survey paper
			
			)
		&lt;/span&gt;
      		| &lt;span class=&quot;pub-category&quot;&gt;Scientific&lt;/span&gt;
	| &lt;span class=&quot;publication-sourceOfData&quot;&gt;kézi felvitel&lt;/span&gt;
&lt;/div&gt;

&lt;div class=&quot;funder&quot;&gt; Bolyai János Kutatási Ösztöndíj(BO/00658/21/6) Funder: Bolyai János Kutatási Ösztöndíj,    (BME-NVA-02 (TKP2021)),    Új Nemzeti Kiválóság Program(ÚNKP-22-5- BME-309)   &lt;/div&gt;
	&lt;div class=&quot;notDuplums&quot;&gt;&lt;a target=&quot;_blank&quot; href=&quot;/api/publication/33628631/notduplums&quot;&gt;350 marked as not duplum&lt;/a&gt;
	&lt;/div&gt;
&lt;div class=&quot;lastModified&quot;&gt;Last Modified: 2024.02.12. 18:15 Tamás Lukács (Gyártástechnológia)
&lt;/div&gt;




	&lt;pre class=&quot;comment&quot; style=&quot;margin-top: 0; margin-bottom: 0;&quot;&gt;&lt;u&gt;Comments&lt;/u&gt;: Funding Agency and Grant Number: 9th Sino-Hungarian Intergovernmental Scientific and Technological Cooperation Project [2019-2.1.11-TET-2020-00203]; Janos Bolyai Research Scholarship of the Hungarian Academy of Sciences [2021-07]; New National Excellence Program of the Ministry for Culture and Innovation from the source of the National Research, Development and Innovation Fund [BO/00508/22/6, B...&lt;/pre&gt;

&lt;/div&gt;&lt;/div&gt;</template2>
    </publication>
  </content>
</myciteResult>
