{ "labelLang" : "hun", "responseDate" : "2024-03-29 00:16", "content" : { "otype" : "JournalArticle", "mtid" : 31522173, "status" : "VALIDATED", "published" : true, "comment" : "Funding Agency and Grant Number: National Research, Development and Innovation Fund [TUDF0/51757/2019-ITM]; European Commission through the H2020 project EPIC [739592]; National Research, Development and Innovation OfficeNational Research, Development & Innovation Office (NRDIO) - Hungary [K 132430]; company Fraisa; company Baler\n Funding text: The research reported in this paper was partly supported by the National Research, Development and Innovation Fund (TUDF0/51757/2019-ITM, Thematic Excellence Program), and by the European Commission through the H2020 project EPIC under grant No. 739592. The research work introduced herein was partly supported by the research project K 132430 (Transient deformation, thermal and tribological processes at fine machining of hard metal surfaces) provided by the National Research, Development and Innovation Office. The authors gratefully thank the support of companies Fraisa and Baler. We especially thank the help of our colleague, Adam Jack) in this research.", "unhandledTickets" : 0, "deleted" : false, "lastRefresh" : "2024-02-20T21:09:32.873+0000", "lastModified" : "2022-09-20T13:45:55.217+0000", "created" : "2020-08-31T07:28:22.293+0000", "creator" : { "otype" : "Author", "mtid" : 10056359, "link" : "/api/author/10056359", "label" : "Geier Norbert (Gyártástechnológia)", "familyName" : "Geier", "givenName" : "Norbert", "published" : true, "oldId" : 10056359, "snippet" : true }, "lastDuplumOK" : "2022-09-20T13:45:44.387+0000", "lastDuplumSearch" : "2022-09-20T13:45:44.387+0000", "validated" : "2022-09-20T13:45:55.316+0000", "validator" : { "otype" : "Admin", "mtid" : 10065569, "link" : "/api/admin/10065569", "label" : "Pécsi Éva (MTMT Közp 3, admin)", "familyName" : "Pécsi", "givenName" : "Éva", "published" : true, "snippet" : true }, "core" : true, "citation" : true, "publicationPending" : false, "type" : { "otype" : "PublicationType", "mtid" : 24, "link" : "/api/publicationtype/24", "label" : "Folyóiratcikk", "code" : 24, "otypeName" : "JournalArticle", "listPosition" : 1, "published" : true, "oldId" : 24, "snippet" : true }, "subType" : { "otype" : "SubType", "mtid" : 10000059, "link" : "/api/subtype/10000059", "label" : "Szakcikk (Folyóiratcikk)", "name" : "Szakcikk", "nameEng" : "Article", "docType" : { "otype" : "PublicationType", "mtid" : 24, "link" : "/api/publicationtype/24", "label" : "Folyóiratcikk", "code" : 24, "otypeName" : "JournalArticle", "listPosition" : 1, "published" : true, "oldId" : 24, "snippet" : true }, "listPosition" : 101, "published" : true, "oldId" : 10000059, "snippet" : true }, "category" : { "otype" : "Category", "mtid" : 1, "link" : "/api/category/1", "label" : "Tudományos", "published" : true, "oldId" : 1, "snippet" : true }, "languages" : [ { "otype" : "Language", "mtid" : 10002, "link" : "/api/language/10002", "label" : "Angol", "name" : "Angol", "nameEng" : "English", "published" : true, "oldId" : 2, "snippet" : true } ], "firstAuthor" : "Balázs, B Z", "authorships" : [ { "otype" : "PersonAuthorship", "mtid" : 93084703, "link" : "/api/authorship/93084703", "label" : "Balázs, B Z ✉ [Balázs, Barnabás Zoltán (gyártástechnológia), szerző] Gyártástudomány és -technológia Tanszék (BME / GPK)", "listPosition" : 1, "share" : 0.5, "first" : true, "last" : false, "corresponding" : true, "author" : { "otype" : "Author", "mtid" : 10058765, "link" : "/api/author/10058765", "label" : "Balázs Barnabás Zoltán (gyártástechnológia)", "familyName" : "Balázs", "givenName" : "Barnabás Zoltán", "published" : true, "oldId" : 10058765, "snippet" : true }, "familyName" : "Balázs", "givenName" : "B Z", "authorTyped" : true, "editorTyped" : false, "otherTyped" : false, "type" : { "otype" : "AuthorshipType", "mtid" : 1, "link" : "/api/authorshiptype/1", "label" : "Szerző", "code" : 0, "published" : true, "oldId" : 0, "snippet" : true }, "published" : false, "snippet" : true }, { "otype" : "PersonAuthorship", "mtid" : 93084704, "link" : "/api/authorship/93084704", "label" : "Takács, M [Takács, Márton (Gyártástudomány), szerző] Gyártástudomány és -technológia Tanszék (BME / GPK); Építőmérnöki Intézet (SZIE / YMÉK)", "listPosition" : 2, "share" : 0.5, "first" : false, "last" : true, "corresponding" : false, "author" : { "otype" : "Author", "mtid" : 10024311, "link" : "/api/author/10024311", "label" : "Takács Márton (Gyártástudomány)", "familyName" : "Takács", "givenName" : "Márton", "published" : true, "oldId" : 10024311, "snippet" : true }, "familyName" : "Takács", "givenName" : "M", "authorTyped" : true, "editorTyped" : false, "otherTyped" : false, "type" : { "otype" : "AuthorshipType", "mtid" : 1, "link" : "/api/authorshiptype/1", "label" : "Szerző", "code" : 0, "published" : true, "oldId" : 0, "snippet" : true }, "published" : false, "snippet" : true } ], "title" : "A comparative analysis of characteristics of cutting forces at micro-milling of hardened steels", "identifiers" : [ { "otype" : "PublicationIdentifier", "mtid" : 17508945, "link" : "/api/publicationidentifier/17508945", "label" : "DOI: 10.1088/1757-899X/903/1/012056", "source" : { "otype" : "PlainSource", "mtid" : 6, "link" : "/api/publicationsource/6", "label" : "DOI", "type" : { "otype" : "PublicationSourceType", "mtid" : 10001, "link" : "/api/publicationsourcetype/10001", "label" : "DOI", "mayHaveOa" : true, "published" : true, "snippet" : true }, "name" : "DOI", "nameEng" : "DOI", "linkPattern" : "https://doi.org/@@@", "publiclyVisible" : true, "published" : true, "oldId" : 6, "snippet" : true }, "oaType" : "GOLD", "oaFree" : true, "validState" : "IDENTICAL", "idValue" : "10.1088/1757-899X/903/1/012056", "realUrl" : "https://doi.org/10.1088/1757-899X/903/1/012056", "published" : false, "snippet" : true }, { "otype" : "PublicationIdentifier", "mtid" : 20423135, "link" : "/api/publicationidentifier/20423135", "label" : "WoS: 000625295400056", "source" : { "otype" : "PlainSource", "mtid" : 1, "link" : "/api/publicationsource/1", "label" : "WoS", "type" : { "otype" : "PublicationSourceType", "mtid" : 10003, "link" : "/api/publicationsourcetype/10003", "label" : "Indexelő adatbázis", "mayHaveOa" : false, "published" : true, "snippet" : true }, "name" : "WoS", "nameEng" : "WoS", "linkPattern" : "https://www.webofscience.com/wos/woscc/full-record/@@@", "publiclyVisible" : true, "published" : true, "oldId" : 1, "snippet" : true }, "validState" : "DIFFERENT", "idValue" : "000625295400056", "realUrl" : "https://www.webofscience.com/wos/woscc/full-record/000625295400056", "published" : false, "snippet" : true }, { "otype" : "PublicationIdentifier", "mtid" : 20423298, "link" : "/api/publicationidentifier/20423298", "label" : "Scopus: 85091569627", "source" : { "otype" : "PlainSource", "mtid" : 3, "link" : "/api/publicationsource/3", "label" : "Scopus", "type" : { "otype" : "PublicationSourceType", "mtid" : 10003, "link" : "/api/publicationsourcetype/10003", "label" : "Indexelő adatbázis", "mayHaveOa" : false, "published" : true, "snippet" : true }, "name" : "Scopus", "linkPattern" : "http://www.scopus.com/record/display.url?origin=inward&eid=2-s2.0-@@@", "publiclyVisible" : true, "published" : true, "oldId" : 3, "snippet" : true }, "idValue" : "85091569627", "realUrl" : "http://www.scopus.com/record/display.url?origin=inward&eid=2-s2.0-85091569627", "published" : true, "snippet" : true }, { "otype" : "PublicationIdentifier", "mtid" : 17508946, "link" : "/api/publicationidentifier/17508946", "label" : "Egyéb URL: https://iopscience.iop.org/article/10.1088/1757-899X/903/1/012056", "source" : { "otype" : "PlainSource", "mtid" : 40, "link" : "/api/publicationsource/40", "label" : "Egyéb URL", "type" : { "otype" : "PublicationSourceType", "mtid" : 10006, "link" : "/api/publicationsourcetype/10006", "label" : "Link", "mayHaveOa" : true, "published" : true, "snippet" : true }, "name" : "Egyéb URL", "nameEng" : "Other URL", "linkPattern" : "@@@", "publiclyVisible" : true, "published" : true, "oldId" : 40, "snippet" : true }, "oaType" : "GOLD", "oaFree" : true, "validState" : "IDENTICAL", "idValue" : "https://iopscience.iop.org/article/10.1088/1757-899X/903/1/012056", "realUrl" : "https://iopscience.iop.org/article/10.1088/1757-899X/903/1/012056", "published" : false, "snippet" : true } ], "journal" : { "otype" : "Journal", "mtid" : 10012914, "link" : "/api/journal/10012914", "label" : "IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING 1757-8981 1757-899X", "pIssn" : "1757-8981", "eIssn" : "1757-899X", "reviewType" : "REVIEWED", "noIF" : true, "sciIndexed" : false, "scopusIndexed" : false, "lang" : "FOREIGN", "hungarian" : false, "published" : true, "oldId" : 10012914, "snippet" : true }, "volume" : "903", "internalId" : "012056", "firstPageOrInternalIdForSort" : "012056", "pageLength" : 8, "publishedYear" : 2020, "abstractText" : "Micro-milling is one of the most important technologies to produce miniature components. Mainly due to the size reduction, the process has many special characteristics, such as the relatively large tool run-out, the relatively large deformation and the cutting edge radius of the micro-milling tool. The cutting force is often correlated to the phenomena mentioned above, its analysis is therefore often required. The main objective of the present paper is to analyse and compare the characteristics of cutting forces in micro-milling of different hardened steels. A systematic series of experiments were conducted on a hardened AISI H13 hot-work tool steel and a Bohler M303 martensitic corrosion resistance steel. The hardness of both materials is 50 HRC. A 500 mu m diameter two fluted carbide micro end mill and a five-axis micromachining centre were applied. The effects of the cutting parameters are analysed by the analysis of variance (ANOVA). Experimental results show that the workpiece material has a significant influence on the cutting forces.", "subjects" : [ { "otype" : "Classification", "mtid" : 10807, "link" : "/api/classification/10807", "label" : "Műszaki és technológiai tudományok", "published" : true, "snippet" : true } ], "keywords" : [ { "otype" : "Keyword", "mtid" : 135, "link" : "/api/keyword/135", "label" : "MODEL", "published" : true, "oldId" : 135, "snippet" : true }, { "otype" : "Keyword", "mtid" : 2995, "link" : "/api/keyword/2995", "label" : "PARAMETERS", "published" : true, "oldId" : 2995, "snippet" : true }, { "otype" : "Keyword", "mtid" : 7020, "link" : "/api/keyword/7020", "label" : "simulation", "published" : true, "oldId" : 7020, "snippet" : true }, { "otype" : "Keyword", "mtid" : 14420, "link" : "/api/keyword/14420", "label" : "Electrochemistry", "published" : true, "oldId" : 14420, "snippet" : true }, { "otype" : "Keyword", "mtid" : 1493583, "link" : "/api/keyword/1493583", "label" : "Materials Science, Multidisciplinary", "published" : true, "snippet" : true }, { "otype" : "Keyword", "mtid" : 1508221, "link" : "/api/keyword/1508221", "label" : "Metallurgy & Metallurgical Engineering", "published" : true, "snippet" : true }, { "otype" : "Keyword", "mtid" : 1586183, "link" : "/api/keyword/1586183", "label" : "Engineering, Manufacturing", "published" : true, "snippet" : true }, { "otype" : "Keyword", "mtid" : 2565869, "link" : "/api/keyword/2565869", "label" : "EDGE RADIUS", "published" : true, "snippet" : true } ], "digital" : true, "printed" : null, "sourceYear" : 2020, "foreignEdition" : true, "foreignLanguage" : true, "fullPublication" : true, "conferencePublication" : false, "nationalOrigin" : true, "missingAuthor" : false, "oaType" : "GOLD", "oaCheckDate" : "2024-02-20", "oaFree" : true, "oaLink" : "https://doi.org/10.1088/1757-899X/903/1/012056", "citationCount" : 2, "citationCountUnpublished" : 0, "citationCountWoOther" : 2, "independentCitCountWoOther" : 1, "nationalOriginCitationCount" : 1, "foreignEditionCitationCount" : 2, "doiCitationCount" : 2, "wosCitationCount" : 2, "scopusCitationCount" : 2, "wosScopusCitationCount" : 2, "wosScopusCitationCountWoOther" : 2, "wosScopusIndependentCitationCount" : 1, "wosScopusIndependentCitationCountWoOther" : 1, "independentCitationCount" : 1, "selfCitationCount" : 1, "unhandledCitationCount" : 0, "citingPubCount" : 2, "independentCitingPubCount" : 1, "citingPubCountWoOther" : 2, "independentCitingPubCountWoOther" : 1, "unhandledCitingPubCount" : 0, "citedPubCount" : 6, "citedCount" : 6, "pubStats" : { "types" : [ { "type" : "Folyóiratcikk", "typeEng" : "Journal Article", "code" : 24, "count" : 2 }, { "type" : "Könyvrészlet", "typeEng" : "Chapter in Book", "code" : 25, "count" : 0 }, { "type" : "Könyv", "typeEng" : "Book", "code" : 23, "count" : 0 }, { "type" : "Egyéb konferenciaközlemény", "typeEng" : "Conference paper", "code" : 31, "count" : 0 }, { "type" : "Egyéb konferenciakötet", "typeEng" : "Conference proceedings", "code" : 32, "count" : 0 }, { "type" : "Oltalmi formák", "typeEng" : "Protection forms", "code" : 26, "count" : 0 }, { "type" : "Disszertáció", "typeEng" : "Thesis", "code" : 28, "count" : 0 }, { "type" : "Egyéb", "typeEng" : "Miscellaneous", "code" : 29, "count" : 0 }, { "type" : "Alkotás", "typeEng" : "Achievement", "code" : 22, "count" : 0 }, { "type" : "Kutatási adat", "typeEng" : "Research data", "code" : 33, "count" : 0 } ], "citationTypes" : [ { "type" : "Folyóiratcikk", "typeEng" : "Journal Article", "code" : 24, "countUnknown" : 0, "countIndependent" : 0, "countSelfCitation" : 0 }, { "type" : "Könyvrészlet", "typeEng" : "Chapter in Book", "code" : 25, "countUnknown" : 0, "countIndependent" : 0, "countSelfCitation" : 0 }, { "type" : "Könyv", "typeEng" : "Book", "code" : 23, "countUnknown" : 0, "countIndependent" : 0, "countSelfCitation" : 0 }, { "type" : "Egyéb konferenciaközlemény", "typeEng" : "Conference paper", "code" : 31, "countUnknown" : 0, "countIndependent" : 0, "countSelfCitation" : 0 }, { "type" : "Egyéb konferenciakötet", "typeEng" : "Conference proceedings", "code" : 32, "countUnknown" : 0, "countIndependent" : 0, "countSelfCitation" : 0 }, { "type" : "Oltalmi formák", "typeEng" : "Protection forms", "code" : 26, "countUnknown" : 0, "countIndependent" : 0, "countSelfCitation" : 0 }, { "type" : "Disszertáció", "typeEng" : "Thesis", "code" : 28, "countUnknown" : 0, "countIndependent" : 0, "countSelfCitation" : 0 }, { "type" : "Egyéb", "typeEng" : "Miscellaneous", "code" : 29, "countUnknown" : 0, "countIndependent" : 0, "countSelfCitation" : 0 }, { "type" : "Alkotás", "typeEng" : "Achievement", "code" : 22, "countUnknown" : 0, "countIndependent" : 0, "countSelfCitation" : 0 }, { "type" : "Kutatási adat", "typeEng" : "Research data", "code" : 33, "countUnknown" : 0, "countIndependent" : 0, "countSelfCitation" : 0 } ], "years" : [ { "year" : 2021, "publicationCount" : 0, "citationCount" : 1, "independentCitationCount" : 0, "citingPubCount" : 1, "independentCitingPubCount" : 0, "oaStats" : null, "oaStats2" : null }, { "year" : 2022, "publicationCount" : 0, "citationCount" : 0, "independentCitationCount" : 0, "citingPubCount" : 0, "independentCitingPubCount" : 0, "oaStats" : null, "oaStats2" : null }, { "year" : 2023, "publicationCount" : 0, "citationCount" : 1, "independentCitationCount" : 1, "citingPubCount" : 1, "independentCitingPubCount" : 1, "oaStats" : null, "oaStats2" : null } ] }, "ratings" : [ { "otype" : "MtaRating", "mtid" : 10486923, "link" : "/api/mtarating/10486923", "label" : "VI. Műszaki Tudományok Osztálya:A IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING 1757-8981 1757-899X", "ratingType" : { "otype" : "RatingType", "mtid" : 10029, "link" : "/api/ratingtype/10029", "label" : "VI. Műszaki Tudományok Osztálya", "code" : "VI. MTO", "institute" : { "otype" : "Institute", "mtid" : 66, "link" : "/api/institute/66", "label" : "VI. Műszaki Tudományok Osztálya VIMTO", "childrenCount" : 0, "allowInstForum" : false, "allowOnlineRegistration" : false, "name" : "VI. Műszaki Tudományok Osztálya", "nameEng" : "HAS Section of Engineering Sciences (VI.)", "published" : true, "oldId" : 66, "snippet" : true }, "published" : true, "snippet" : true }, "val" : "A", "published" : true, "snippet" : true } ], "mtaRatingsForSort" : "A", "hasCitationDuplums" : false, "userChangeableUntil" : "2020-11-29T08:28:22.835+0000", "directInstitutesForSort" : "Gyártástudomány és -technológia Tanszék (BME / GPK); Építőmérnöki Intézet (SZIE / YMÉK)", "ownerAuthorCount" : 2, "ownerInstituteCount" : 12, "directInstituteCount" : 2, "authorCount" : 2, "contributorCount" : 0, "hasQualityFactor" : false, "link" : "/api/publication/31522173", "label" : "Balázs B Z et al. A comparative analysis of characteristics of cutting forces at micro-milling of hardened steels. (2020) IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING 1757-8981 1757-899X 903", "template" : "