Phased Array Noise Source Localization Measurements Made on a Williams International FJ44 Engine

Podboy, Gary G; Horváth, Csaba [Horváth, Csaba (Áramlástan), szerző] Áramlástan Tanszék (BME / GPK)

Angol nyelvű Tudományos Konferenciaközlemény (Egyéb konferenciaközlemény)
Megjelent: 15th AIAA/CEAS Aeroacoustics Conference. (2009) pp. 1-17 Paper: AIAA-2009-3183
    Szakterületek:
      A 48-microphone planar phased array system was used to acquire noise source localization data on a fullscale Williams International FJ44 turbofan engine. Data were acquired with the array at three different locations relative to the engine, two on the side and one in front of the engine. At the two side locations the planar microphone array was parallel to the engine centerline; at the front location the array was perpendicular to the engine centerline. At each of the three locations, data were acquired at eleven different engine operating conditions ranging from engine idle to maximum (take off) speed. Data obtained with the array off to the side of the engine were spatially filtered to separate the inlet and nozzle noise. Tones occurring in the inlet and nozzle spectra were traced to the low and high speed spools within the engine. The phased array data indicate that the Inflow Control Device (ICD) used during this test was not acoustically transparent; instead, some of the noise emanating from the inlet reflected off of the inlet lip of the ICD. This reflection is a source of error for far field noise measurements made during the test. The data also indicate that a total temperature rake in the inlet of the engine is a source of fan noise.
      Hivatkozás stílusok: IEEEACMAPAChicagoHarvardCSLMásolásNyomtatás
      2021-10-23 04:26