Gépészet 2002

Penninger, A [Penninger, Antal (Hőerőgépek, tüzel...), szerk.] Energetikai Gépek és Rendszerek Tanszék (BME / GPK); Ziaja, György [szerk.]; Vörös, G [Vörös, Gábor (Műszaki mechanika), szerk.]

Angol nyelvű Konferenciakötet (Könyv) Tudományos

Megjelent: Budapest University of Technology and Economics Faculty of Mechanical Engineering, Budapest, Magyarország, 881 p. 2002

Konferencia: 3rd Conference on Mechanical Engineering, Gépészet 2002 2002-05-30 [Budapest, Magyarország]

Azonosítók

MTMT: 1632898
ISBN: 9636991650
BME OMIKK: 000445613
autopszia:
OSZK: 3677113
WorldCat: 834639730

Szakterületek:

Műszaki és technológiai tudományok

Fejezetek

Nagy B V. Measuring colour identification in human colour vision. (2002) Megjelent: Gépészet 2002 pp. 3-7
Bihari P et al. External (environmental) cost of electricity. (2002) Megjelent: Gépészet 2002 pp. 12-16
Ézsöl Gy et al. PMK-2 the Thermohydraulic Model of the Paks Nuclear Power Plant. (2002) Megjelent: Gépészet 2002 pp. 22-26
Farkas F. Complex test of plant oil based fuels. (2002) Megjelent: Gépészet 2002 pp. 27-31
Fekete István. Thermic efficacy research of the shell-structured collector bodies integrable into architectural structures. (2002) Megjelent: Gépészet 2002 pp. 37-41
Garbai L et al. The Description of Domestic Hot Water Consumption by the Method of Mathematical Statistics and the Application of the New Results of the Method in District Heat Supply. (2002) Megjelent: Gépészet 2002 pp. 42-47
Légrádi Gábor et al. CFD analysis of natural circulation in the RPV and the cooling pond of a VVER-440 type reactor in incidental conditions during maintenance. (2002) Megjelent: Gépészet 2002 pp. 47-51
Penninger A et al. Utilization of energies obtained in expansion processes for the production of electric energy. (2002) Megjelent: Gépészet 2002 pp. 61-65
L Szabados et al. Experimental Investigation of VVER Specific Phenomena. (2002) Megjelent: Gépészet 2002 pp. 72-76
Artinger I et al. Comparison between the conventional and newly developed chromium alloyed steels used in power plants. (2002) Megjelent: Gépészet 2002 pp. 94-98
Beda Gy. Two approximate theories of bent plane curved rods. (2002) Megjelent: Gépészet 2002 pp. 104-108
Béda PB. Feedback and anticipatory control of a pendulum under harmonic excitation,. (2002) Megjelent: Gépészet 2002 pp. 109-114
Bíró T.. Investigation of Microcavities in Heat resistant Steels. (2002) Megjelent: Gépészet 2002 pp. 119-212
L Devenyi et al. Failure Analysis. (2002) Megjelent: Gépészet 2002 pp. 135-139
Dobránszky J et al. Creep and thermal fatigue of aluminium matrix composite wires. (2002) Megjelent: Gépészet 2002 pp. 140-144
Dong-Ho K et al. Barkhausen noise test of thermal fatigue in a new metallic pipeline material. (2002) Megjelent: Gépészet 2002 pp. 145-148
Dudás Z et al. Phase elements for coupled simulation of TTT and CCT diagrams. (2002) Megjelent: Gépészet 2002 pp. 149-153
Dudás Z et al. Some examples of the use of phase elements for coupled simulation of TTT and CCT diagrams. (2002) Megjelent: Gépészet 2002 pp. 154-158
Fábián E R et al. Effects of Laser Posthardening on the Properties of Laser Treated Surfaces;. (2002) Megjelent: Gépészet 2002 pp. 159-163
Garbai L. Application of Fractional Differential and Integral Operators in the Description of Non-steady State Heat Conduction. (2002) Megjelent: Gépészet 2002 pp. 164-168
Gáspár T et al. Mechanical modelling of electromagnetic exciters. (2002) Megjelent: Gépészet 2002 pp. 169-173
Goda T et al. FE Modelling of Fibre/Matrix Debonding Phenomena in the Case of Normally Oriented Fibre-Reinforced Polymer Composites. (2002) Megjelent: Gépészet 2002 pp. 174-178
Gróf Gyula. Heat penetration phenomenon and temperature rise of the photothermally excited surface. (2002) Megjelent: Gépészet 2002 pp. 179-183
Gróf Gyula et al. Differential flash measurement of the thermal properties of thin layers. (2002) Megjelent: Gépészet 2002 pp. 184-188
Huba A et al. Synthesis Method for Identification of Material Models. (2002) Megjelent: Gépészet 2002 pp. 189-193
G Kalácska et al. Tribological research of up-to-date, environment-friendly self-lubricating materials: correlations between large scale and small scale tribotesting.. (2002) Megjelent: Gépészet 2002 pp. 194-199
Kovács Tünde. Wear test methods of metal surfaces. (2002) Megjelent: Gépészet 2002 pp. 204-208
Kozma M et al. Calculation of contact temperature of polymer/steel pairs. (2002) Megjelent: Gépészet 2002 pp. 209-213
Molnár L et al. Linear Lumped Models of Silicon Elastomers. (2002) Megjelent: Gépészet 2002 pp. 224-228
Palotas B. Modelling of pressure welding processes by methods of mechanical forming. (2002) Megjelent: Gépészet 2002 pp. 229-233
Pölöskei K et al. Basalt fiber - the new type of reinforcement in polymer composites. (2002) Megjelent: Gépészet 2002 pp. 234-238
Prohászka J. The causes of inhomogeneity of the stresses and plastic deformations existing in metals near at elastic limit. (2002) Megjelent: Gépészet 2002 pp. 239-243
Régert T et al. Numerical simulation of flow field past road vehicle wheel. (2002) Megjelent: Gépészet 2002 pp. 244-248
Romhány G et al. Investigation of flax fiber reinforced polypropylene composites by acoustic emission. (2002) Megjelent: Gépészet 2002 pp. 249-253
Szabó JS et al. Investigation of dynamic fracture toughness of short ceramic fiber reinforced polypropylene composites. (2002) Megjelent: Gépészet 2002 pp. 254-258
Szabó Zsolt et al. Dynamics of D.o.F. Model of a Pneumatic Valve. (2002) Megjelent: Gépészet 2002 pp. 259-263
Szalay Zsolt et al. Evaluation of porosity in Al-Si alloy die castings – comparison of different NDT methods. (2002) Megjelent: Gépészet 2002 pp. 264-268
Szekrényes András. Finite Element Analysis of a Layered Cylinder Using the Connection between the Macro- and Microstructure. (2002) Megjelent: Gépészet 2002 pp. 269-273
Szentgyörgyi S et al. Investigation of Heat Transfer Coefficient at Simultaneous Heat and Mass Transfer Process on Boundary Layer Theory. (2002) Megjelent: Gépészet 2002 pp. 274-278
Triesz P et al. Modelling of rotor nonlinear vibrations by discrete-time systems. (2002) Megjelent: Gépészet 2002 pp. 283-287
Váradi K et al. Simulation of Wear and Heat Development during Sliding of a steel pin on a polymer surface. (2002) Megjelent: Gépészet 2002 pp. 292-296
Vas L M et al. Testing the Bulk of Polyester Staple Yarns and their Change by Twisting. (2002) Megjelent: Gépészet 2002 pp. 297-301
Vízváry Zs et al. Thermomechanical Investigation of a Suspended Microhotplate. (2002) Megjelent: Gépészet 2002 pp. 302-306
Vörös G et al. Analysis the effects of postulated pipe rapture. (2002) Megjelent: Gépészet 2002 pp. 307-310
Xolin E et al. Effect of cold working temperature on the martensite formation in AISI 304 stainless steel. (2002) Megjelent: Gépészet 2002 pp. 311-315
Zsidai L et al. The effect of the thermal conductivity on friction of engineering polymers measured on DLN coating and steel surface.. (2002) Megjelent: Gépészet 2002 pp. 316-321
Bereczky A et al. NO emission model of Otto engines with parameter analysis. (2002) Megjelent: Gépészet 2002 pp. 322-326
Bereczky A et al. Optical and acoustical investigation of acoustical induced premixed flames. (2002) Megjelent: Gépészet 2002 pp. 327-331
Goricsán I et al. Wind tunnel investigation on atmospheric pollutant transport. (2002) Megjelent: Gépészet 2002 pp. 332-336
Halász G et al. Completely and partially filled pipes in looped systems. (2002) Megjelent: Gépészet 2002 pp. 337-341
Hegedűs Gy et al. Examination and modelling of burning process in spark ignited engine. (2002) Megjelent: Gépészet 2002 pp. 342-346
Hortobágyi Tímea et al. Mass transfer characteristics of columns with ellipsoid packing. (2002) Megjelent: Gépészet 2002 pp. 347-351
Hős Cs et al. On the friction factor in unsteady laminar flow. (2002) Megjelent: Gépészet 2002 pp. 352-356
Kajtár L et al. Influence of CO2 Concentration on Office Work Intensity and Human Well-being. (2002) Megjelent: Gépészet 2002 pp. 357-361
Kajtár L et al. Measurements of Indoor Air Quality and Emission of Indoor Materials. (2002) Megjelent: Gépészet 2002 pp. 362-366
Kovács Krisztián Péter et al. Accomplishment of complex optimisation of boiler control [Kazánszabályozás komplex optimalizációjának megvalósítási lehetőségei]. (2002) Megjelent: Gépészet 2002 pp. 377-380
Kovács László et al. Characteristics of the Two-phase Flow Arising in the Mixing Area of the Air Lift. (2002) Megjelent: Gépészet 2002 pp. 381-385
Kozári N et al. The use of pressure separation diaphragm under non-stationery conditions. (2002) Megjelent: Gépészet 2002 pp. 386-390
Kristóf G et al. Numerical Simulation of a Radial Pump. (2002) Megjelent: Gépészet 2002 pp. 391-395
Lajos T. et al. Wind tunnel measurement and numerical simulation of wind load acting on buildings. (2002) Megjelent: Gépészet 2002 pp. 396-400
Láng P et al. Batch Heteroazeotropic Rectification of a Low Relative Volatility Mixture under Continuous Entrainer Feeding. (2002) Megjelent: Gépészet 2002 pp. 401-405
Pandula Zoltán. Determination of the Hydraulic Torque Acting on Check Valves Under Transient Flow Conditions. (2002) Megjelent: Gépészet 2002 pp. 411-415
Ronkay F et al. Investigation the effects on environmental interaction at the PET bottles. (2002) Megjelent: Gépészet 2002 pp. 416-420
Suda J.M. et al. Single and two-phase flow measurements in a plane free shear layer flow via PIV and PTV(S) techniques. (2002) Megjelent: Gépészet 2002 pp. 426-430
SZENTE Viktor et al. Computational and experimental investigation on the flow characteristics of electropneumatic valves. (2002) Megjelent: Gépészet 2002 pp. 431-435
Szentgyörgyi S et al. Determining Heat Transfer Coefficient in the Receding Evaporation Front Phase During Convection Drying. (2002) Megjelent: Gépészet 2002 pp. 436-440
Tisza M et al. Environmentally Friendly Lubrication in Sheet Metal Forming. (2002) Megjelent: Gépészet 2002 pp. 451-455
Tömösy L et al. Computer simulation of temperature distribution in the penetrating drying front section of convection drying. (2002) Megjelent: Gépészet 2002 pp. 456-460
Ando N et al. Internet Based Micro-Telemanipulation System. (2002) Megjelent: Gépészet 2002 pp. 467-471
Antal Ákos. Identification of false Moiré fringes by using the shadow moiré arrangement. (2002) Megjelent: Gépészet 2002 pp. 472-474
Aradi P. XML-Based Data Structures in Simulation Systems. (2002) Megjelent: Gépészet 2002 pp. 475-478
Borhy Istvan et al. Practical Application of FEM in the Technology Desing of Resistance Spot Welding in Railway Production. (2002) Megjelent: Gépészet 2002 pp. 479-484
Csernák Gábor et al. Transient Chaotic Phenomena in Digitally Controlled Systems. (2002) Megjelent: Gépészet 2002 pp. 485-489
Gräff József. Multiple stepintegrators using variable interval. (2002) Megjelent: Gépészet 2002 pp. 490-494
Haidegger G et al. Assessment of multimedia technologies for use in digital factory projects. (2002) Megjelent: Gépészet 2002 pp. 495-499
Kádár B. Manufacturing systems applying adaptive agents. (2002) Megjelent: Gépészet 2002 pp. 505-509
Kovács J G. Injection molding simulation using rapid tool inserts. (2002) Megjelent: Gépészet 2002 pp. 510-514
Körtélyesi G et al. Numerical Simulation of the Self-taping Process by Threaded Joint Between Metal Bolt and Polymer Nut. (2002) Megjelent: Gépészet 2002 pp. 515-519
Magó László et al. Integer Valued Non-Linear Programming as the Method for Planning Optimal Machinery Park. (2002) Megjelent: Gépészet 2002 pp. 525-529
Mátyási Gy et al. Interactive Reconstruction of Geometric Models based on a set of Discrete Measured Points. (2002) Megjelent: Gépészet 2002 pp. 530-534
Mikó Balázs et al. Artificial intelligence methods in early manufacturing time estimation. (2002) Megjelent: Gépészet 2002 pp. 535-539
Monostori L. Digital enterprises, production networks. (2002) Megjelent: Gépészet 2002 pp. 540-544
Renner G et al. Reconstruction strategy for complex free form objects. (2002) Megjelent: Gépészet 2002 pp. 560-564
Tamás Péter et al. 3-D body modelling in clothing design. (2002) Megjelent: Gépészet 2002 pp. 570-573
Viharos Z S et al. Monitoring parameter based determination of production tolerances.. (2002) Megjelent: Gépészet 2002 pp. 574-578
Viharos Z S et al. Optimisation of production systems by using simulation and artificial intelligence techniques.. (2002) Megjelent: Gépészet 2002 pp. 579-583
Zsíros Péter et al. Humanoid Type Slave Device for Telemanipulation. (2002) Megjelent: Gépészet 2002 pp. 584-588
Bagi I et al. Interactive design and testing of towers for high voltage transmission lines. (2002) Megjelent: Gépészet 2002 pp. 590-594
Bagi I et al. Dynamic analysis of a turbine blade using the finite element method. (2002) Megjelent: Gépészet 2002 pp. 595-598
G Halász et al. Dynamic Pump Model. (2002) Megjelent: Gépészet 2002 pp. 614-618
Julean Ramona et al. Made-to-measure pattern design possibilities for womens’ clothes. (2002) Megjelent: Gépészet 2002 pp. 629-633
Kovács L et al. Efficiency of planetary gear drives. (2002) Megjelent: Gépészet 2002 pp. 634-638
Kozma M. Bearings without lubrication. (2002) Megjelent: Gépészet 2002 pp. 639-643
Kozma M et al. Research of contact pairs on pin on disc tribometer. (2002) Megjelent: Gépészet 2002 pp. 644-648
Körtélyesi G et al. Shape Optimization and Modelling in an Integrated CAD/FEM Environment. (2002) Megjelent: Gépészet 2002 pp. 649-653
Nacsa J. Integrated framework for machine tool design. (2002) Megjelent: Gépészet 2002 pp. 659-663
A Nagy et al. Dimensioning Pressure Vessels Considering Bauschinger Effect. (2002) Megjelent: Gépészet 2002 pp. 664-668
Németh I et al. Preliminary Mechanical Design of Machine Tools within a Mechatronic Design Environment. (2002) Megjelent: Gépészet 2002 pp. 669-673
Soós E et al. Experimental and Numerical Investigations of a Thread–Cutting Screw Joint. (2002) Megjelent: Gépészet 2002 pp. 674-678
Vad J. Iterative design of high performance axial flow rotors with forward-swept blades. (2002) Megjelent: Gépészet 2002 pp. 679-683
Varga László. Design and Optimization of Composite Tubes Connected with Flanges. (2002) Megjelent: Gépészet 2002 pp. 684-688
Pal Boza. Durability augmentation of electrochemically polished high-speed steel tools. (2002) Megjelent: Gépészet 2002 pp. 690-694
Erdélyi F et al. Production management: taking up the challenge of integration. (2002) Megjelent: Gépészet 2002 pp. 705-709
Husi Géza et al. The elaboration of Coil and Lamp tracking system for the manufacture of bulbs based on informatics. (2002) Megjelent: Gépészet 2002 pp. 710-714
Insperger T et al. Chatter suppression of turning process via periodic modulation of the spindle speed - a 1 DOF analysis. (2002) Megjelent: Gépészet 2002 pp. 720-724
Nyírő J et al. Analysis of deformations during the chip removal. (2002) Megjelent: Gépészet 2002 pp. 744-748
Pokorádi László. Reliability and Quality of Maintenance. (2002) Megjelent: Gépészet 2002 pp. 749-753
Ilie Zudor E et al. VIMIMS: Virtual institute for the modelling of industrial manufacturing systems: An international platform for teaching and research. (2002) Megjelent: Gépészet 2002 pp. 754-758
Ábrahám Gy. New results in the measurement technique of colour vision. (2002) Megjelent: Gépészet 2002 pp. 760-764
Bereczky Á et al. Investigation of ignition delay of spark ignition type internal combustion engines. (2002) Megjelent: Gépészet 2002 pp. 775-779
J Csizmadia. New measurement setup for magnetic permeability. (2002) Megjelent: Gépészet 2002 pp. 780-784
Halász G et al. Velocity measurement in non-stationary flow. (2002) Megjelent: Gépészet 2002 pp. 785-789
Halász Marianna et al. Application of moiré method for anthropometrical analysis. (2002) Megjelent: Gépészet 2002 pp. 795-798
Kovács Á. Plate models for sensitivity analysis of capacitive pressure microsensors. (2002) Megjelent: Gépészet 2002 pp. 799-803
Rácz Zs et al. CCD Camera Tensile Tester and its Application for Testing Fiber Reinforced Composites. (2002) Megjelent: Gépészet 2002 pp. 812-816
Samu K. Automatized Gamma-Curve Measurement of CRT Computer Monitors. (2002) Megjelent: Gépészet 2002 pp. 817-821
Arz G et al. Safety Device for Rehabilitation Robots. (2002) Megjelent: Gépészet 2002 pp. 828-832
Horváth M et al. The application of kinesiological electromyography especially int he treatment of patients with brain injury. (2002) Megjelent: Gépészet 2002 pp. 833-837
Kiss RM et al. In Vivo Gait analysis specialized for knee-joint examination. (2002) Megjelent: Gépészet 2002 pp. 838-842
Kiss R M et al. Comparison of gait analysis on manual and on motorised treadmill. (2002) Megjelent: Gépészet 2002 pp. 843-847
Kovács L László et al. Indirect force control applied in rehabilitation robotics. (2002) Megjelent: Gépészet 2002 pp. 853-857
Sandag Bunia et al. Determination of human body measurements with conventional measuring and optical method. (2002) Megjelent: Gépészet 2002 pp. 858-862
Stefanik Gy et al. Application of Ultrasound Based 3 Dimensional Motion Analyser System in Physical Medicine and Rehabilitation. (2002) Megjelent: Gépészet 2002 pp. 863-867

Hivatkozás stílusok: IEEE ACM APA Chicago Harvard CSLMásolásNyomtatás

Gépészet 2002

Penninger, A [Penninger, Antal (Hőerőgépek, tüzel...), szerk.] Energetikai Gépek és Rendszerek Tanszék (BME / GPK); Ziaja, György [szerk.]; Vörös, G [Vörös, Gábor (Műszaki mechanika), szerk.]

Lista exportálása irodalomjegyzékként