Harsányi G et al. Correlation between Material Composition, Processing, Chemical Bonding State, and Electrochemical Migration Failure Rate in Isolating Compounds of High Density Microelectronics Systems. (1996) Megjelent: 46th IEEE Electronic Components and Technology Conference pp. 765-771, 2608791
Konferenciaközlemény (Könyvrészlet) | Tudományos[2608791]
  1. Christian Matzner. Konzeption produktspezifi scher Lösungen zur Robustheitssteigerung elektronischer Systeme gegen die Einwirkung von Betauung im Automobil. (2010)
    PhD (Disszertáció) | Tudományos[30676061] [Nyilvános]
    Független, Idéző: 30676061, Kapcsolat: 28166041
  2. Lee Shin-Bok et al. Effect of Initial Anodic Dissolution Current on the Electrochemical Migration Phenomenon of Sn Solder. (2009) Megjelent: 59th Electronic Components and Technology Conference pp. 1737-1740
    Konferenciaközlemény (Egyéb konferenciaközlemény) | Tudományos[23902139] [Nyilvános]
    Független, Idéző: 23902139, Kapcsolat: 23902139
  3. Lee SB et al. Effect of Bias Voltage on the Electrochemical Migration Behaviors of Sn and Pb. (2009) IEEE TRANSACTIONS ON DEVICE AND MATERIALS RELIABILITY 1530-4388 9 3 483-488
    Folyóiratcikk[23902138] [Admin láttamozott]
    Független, Idéző: 23902138, Kapcsolat: 23902138
  4. Hussain M A et al. Electrochemical migration of electronic components at sea environments-characterizations and solutions. (2008) Megjelent: VLSI Packaging Workshop of Japan, 2008. VPWJ 2008. IEEE 9th pp. 105-108
    Konferenciaközlemény (Könyvrészlet) | Tudományos[23902142] [Nyilvános]
    Független, Idéző: 23902142, Kapcsolat: 23902142
  5. Yang S et al. Electrochemical migration of land grid array sockets under highly accelerated stress conditions. (2005) Megjelent: Electrical Contacts, Proceedings of the Annual Holm Conference on Electrical Contacts pp. 238-244
    Konferenciaközlemény (Könyvrészlet) | Tudományos[23902140] [Nyilvános]
    Független, Idéző: 23902140, Kapcsolat: 23902140
  6. Bowman A C. A SELECTIVE ENCAPSULATION SOLUTION FOR PACKAGING AN OPTICAL MICROELECTRO MECHANICAL SYSTEM. (2002)
    Nem besorolt (Disszertáció) | Tudományos[23902143] [Nyilvános]
    Független, Idéző: 23902143, Kapcsolat: 23902143
Illyefalvi-Vitez Zsolt et al. Application of laser engraving for the fabrication of fine resolution printed wiring laminates for MCM-Ls. (1997) Megjelent: 47th IEEE Electronic Components and Technology Conference pp. 502-510, 2612412
Konferenciaközlemény (Könyvrészlet) | Tudományos[2612412]
  1. Tseng SP et al. A UNIFORM LASER ENERGY DENSITY CONTROLLER FOR THE RAPID PROTOTYPE PROCESSING. (2010) JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS 0253-3839 2158-7299 33 3 405-414
    Folyóiratcikk[23928103] [Admin láttamozott]
    Független, Idéző: 23928103, Kapcsolat: 23928103
  2. Tseng S P et al. A uniform laser energy control for ceramic sintering rapid prototyping. (2010) Megjelent: Proceedings of the SICE 2010 Annual Conference, SICE 2010 pp. 3116-3120
    Konferenciaközlemény (Könyvrészlet) | Tudományos[23928109] [Nyilvános]
    Független, Idéző: 23928109, Kapcsolat: 23928109
  3. Varnai L et al. Tracking tool in MCM-L prototyping system. (2001) Megjelent: 24TH INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY: CONCURRENT ENGINEERING IN ELECTRONIC PACKAGING, CONFERENCE PROCEED... pp. 154-157
    Konferenciaközlemény (Könyvrészlet) | Tudományos[23928105] [Nyilvános]
    Független, Idéző: 23928105, Kapcsolat: 23928105
  4. Lau J H et al. Overview of microvia technology. (2000) CIRCUIT WORLD 0305-6120 1758-602X 26 2 22-32
    Folyóiratcikk[23928133] [Admin láttamozott]
    Független, Idéző: 23928133, Kapcsolat: 23928110
Illyefalvi-Vitez Zsolt et al. Problem-oriented education of electronics technology at the Technical University of Budapest. (1997) Megjelent: 47th IEEE Electronic Components and Technology Conference pp. 942-950, 2612413
Konferenciaközlemény (Könyvrészlet) | Tudományos[2612413]
  1. Ruszinkó M et al. Education of the computer aided design. (2001) Megjelent: 24th International Spring Seminar on Electronics Technology, Calimanesti – Caciulata, Romania pp. 220-224
    Konferenciaközlemény (Könyvrészlet) | Tudományos[2618160] [Admin láttamozott]
    Független, Idéző: 2618160, Kapcsolat: 23928114
Illyefalvi-Vitez Zsolt et al. Recent advancements in MCM-L imaging and via generation by laser direct writing. (1998) Megjelent: 48th IEEE Electronic Components and Technology Conference pp. 144-150, 2612418
Konferenciaközlemény (Könyvrészlet) | Tudományos[2612418]
  1. Lau JH et al. Nonlinear-time-dependent analysis of micro via-in-pad substrates for solder bumped flip chip applications. (2002) JOURNAL OF ELECTRONIC PACKAGING 1043-7398 1528-9044 124 3 205-211
    Folyóiratcikk[23928122] [Admin láttamozott]
    Független, Idéző: 23928122, Kapcsolat: 23928122
  2. Deak J et al. Laser via formation in flexible substrates for high density electronic assembly. (2001) Megjelent: 24TH INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY: CONCURRENT ENGINEERING IN ELECTRONIC PACKAGING, CONFERENCE PROCEED... pp. 163-166
    Konferenciaközlemény (Könyvrészlet) | Tudományos[23928125] [Nyilvános]
    Független, Idéző: 23928125, Kapcsolat: 23928125
  3. Lau J H et al. Overview of microvia technology. (2000) CIRCUIT WORLD 0305-6120 1758-602X 26 2 22-32
    Folyóiratcikk[23928133] [Admin láttamozott]
    Független, Idéző: 23928133, Kapcsolat: 23928133
  4. Harsányi G et al. A new application of acoustic micro imaging: Screening MCM-C multilayer defects. (2000) MICROELECTRONICS RELIABILITY 0026-2714 1872-941X 40 3 477-484
    Szakcikk (Folyóiratcikk) | Tudományos[2606612] [Admin láttamozott]
    Független, Idéző: 2606612, Kapcsolat: 23928134
  5. Harsányi Gábor. Irregular Effect of Chloride Impurities on Migration Failure Reliability: Contradictions or Understandable?. (1999) MICROELECTRONICS RELIABILITY 0026-2714 1872-941X 39 1407-1411
    Szakcikk (Folyóiratcikk) | Tudományos[2606582] [Admin láttamozott]
    Független, Idéző: 2606582, Kapcsolat: 23928131
  6. Harsányi G. The Effect of Ionic Impurities on Electrochemical Migration Failure Reliability of Microcircuits. (1998) Megjelent: 2nd Electronics Packaging Technology Conference pp. 623-628
    Konferenciaközlemény (Könyvrészlet) | Tudományos[2611043] [Egyeztetett]
    Független, Idéző: 2611043, Kapcsolat: 23928129
  7. Harsanyi G et al. Analyzing MCM-C multilayer defects by using acoustic micro imaging. (1998) Megjelent: 1998 INTERNATIONAL SYMPOSIUM ON MICROELECTRONICS pp. 571-576
    Konferenciaközlemény (Egyéb konferenciaközlemény) | Tudományos[23928128] [Nyilvános]
    Független, Idéző: 23928128, Kapcsolat: 23928128
G Harsányi et al. Combining inorganic and organic gas sensors elements: a new approach for multicomponent sensing. (1999) SENSOR REVIEW 0260-2288 19 2 128-134, 2947
Szakcikk (Folyóiratcikk) | Tudományos[2947]
  1. M Aslam et al. Polyvinyl alcohol: A review of research status and use of polyvinyl alcohol based nanocomposites. (2018) POLYMER ENGINEERING AND SCIENCE 0032-3888 1548-2634 58 12 2119-2132
    Szakcikk (Folyóiratcikk) | Tudományos[27360202] [Admin láttamozott]
    Független, Idéző: 27360202, Kapcsolat: 27360202
  2. WANG P et al. The Vapor Response Properties of P(St-AM)@Ag Complex Microspheres. (2012) CHEMISTRY AND BIOENGINEERING 1672-5425 29 11 21-25
    Szakcikk (Folyóiratcikk) | Tudományos[24119132] [Admin láttamozott]
    Független, Idéző: 24119132, Kapcsolat: 24119132
  3. 王 鹏举 et al. P(St-AM)@Ag复合微球的气敏性研究. (2012) CHEMISTRY AND BIOENGINEERING 1672-5425 2012 11 21-25
    Szakcikk (Folyóiratcikk) | Tudományos[32783712] [Nyilvános]
    Független, Idéző: 32783712, Kapcsolat: 31243006
  4. B Adhikari P. Polymers in Chemical Sensors. (2010) Megjelent: Chemical Sensors pp. 1-76
    Könyvfejezet (Könyvrészlet) | Tudományos[27378992] [Nyilvános]
    Független, Idéző: 27378992, Kapcsolat: 27378992
  5. Kukla A. L. et al. THIN FILMS OF TRET-BUTYL CALIXARENE AS SENSITIVE MATERIALS FOR ORGANIC COMPOUND DETECTORS. (2009) Sensor Electronics and Microsystem Technologies 1815-7459 2415-3508 6 3 54-65
    Szakcikk (Folyóiratcikk) | Tudományos[32783707] [Nyilvános]
    Független, Idéző: 32783707, Kapcsolat: 31242992
  6. Kukla A et al. THIN FILMS OF TRET-BUTYL CALIXARENE. (2009) Sensor Electronics and Microsystem Technologies 1815-7459 2415-3508 3 54-65
    Szakcikk (Folyóiratcikk) | Tudományos[23890752] [Admin láttamozott]
    Független, Idéző: 23890752, Kapcsolat: 24119131
  7. NOVITZKÁ V et al. On Optimizing Proof Search in Linear Logic by Value Iteration Method. (2007) ACTA ELECTROTECHNICA ET INFORMATICA 1335-8243 1338-3957 4 7 1-6
    Szakcikk (Folyóiratcikk) | Tudományos[23293033] [Egyeztetett]
    Független, Idéző: 23293033, Kapcsolat: 31242988
  8. Xie Y B et al. Multifunctional polypyrrole composite films. (2006) PROGRESS IN CHEMISTRY 1005-281X 1005-281X 18 12 1677-1683
    Szakcikk (Folyóiratcikk) | Tudományos[24119129] [Egyeztetett]
    Független, Idéző: 24119129, Kapcsolat: 24119129
  9. Zeng Xiaoyan et al. Direct fabrication of thermosensors by laser micro-cladding functional materials. (2006) Megjelent: International Congress on Applications of Lasers & Electro-Optics p. M801
    Konferenciaközlemény (Könyvrészlet) | Tudományos[33148672] [Nyilvános]
    Független, Idéző: 33148672, Kapcsolat: 31763972
  10. 陈 友汜 et al. 高分子及其复合物气敏材料的研究进展. (2005) KEJI TONGBAO / BULLETIN OF SCIENCE AND TECHNOLOGY 1001-7119 2005 2 226-232
    Szakcikk (Folyóiratcikk) | Tudományos[32783701] [Nyilvános]
    Független, Idéző: 32783701, Kapcsolat: 31242981
  11. CHEN Y et al. The Development of Gas Sensitive Polymer and Polymer Composite. (2005) KEJI TONGBAO / BULLETIN OF SCIENCE AND TECHNOLOGY 1001-7119 21 2 226-232
    Szakcikk (Folyóiratcikk) | Tudományos[24119130] [Admin láttamozott]
    Független, Idéző: 24119130, Kapcsolat: 24119130
  12. Kantor Z. Sub-picosecond excimer laser machining of a thick film circuit material. (2004) THIN SOLID FILMS 0040-6090 1879-2731 453 350-352
    Szakcikk (Folyóiratcikk) | Tudományos[2788410] [Nyilvános]
    Független, Idéző: 2788410, Kapcsolat: 20537500
  13. Snopok BA et al. Multisensor systems for chemical analysis: state-of-the-art in Electronic Nose technology and new trends in machine olfaction. (2002) THIN SOLID FILMS 0040-6090 1879-2731 418 1 21-41
    Szakcikk (Folyóiratcikk) | Tudományos[23914938] [Egyeztetett]
    Független, Idéző: 23914938, Kapcsolat: 20537498
Illyefalvi-Vitéz Zs et al. Virtual Laboratory Support for Microelectronics Packaging Education. (1999) Megjelent: Proceedings of 49th Electronic Components and Technology Conference pp. 1068-1073, 2613825
Konferenciaközlemény (Könyvrészlet) | Tudományos[2613825]
  1. Grimaldi D et al. Hardware and software to design virtual laboratory for education in instrumentation and measurement. (2009) MEASUREMENT 0263-2241 42 4 485-493
    Folyóiratcikk[23933077] [Admin láttamozott]
    Független, Idéző: 23933077, Kapcsolat: 23933077
  2. Andria G et al. Remote didactic laboratory "G. Savastano,"The Italian experience for E-Learning at the technical universities in the field of electrical and electronic measurement: Architecture and optimization of the communication performance based on thin client technology. (2007) IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT 0018-9456 1557-9662 56 4 1124-1134
    Folyóiratcikk | Tudományos[23933078] [Nyilvános]
    Független, Idéző: 23933078, Kapcsolat: 23933078
  3. Andria G et al. Remote didactic laboratory "G. Savastano": The Italian experience for the E-learning at the technical universities in the field of the electrical and electronic measurements, architecture and delivered services. (2006) Megjelent: Conference Record - IEEE Instrumentation and Measurement Technology Conference pp. 998-1002
    Konferenciaközlemény (Könyvrészlet) | Tudományos[23933079] [Nyilvános]
    Független, Idéző: 23933079, Kapcsolat: 23933079
  4. Grimaldi D et al. Aspects of traditional versus virtual laboratory for education in instrumentation and measurement. (2005) Megjelent: Proceedings of the 21st IEEE Instrumentation and Measurement Technology Conference, IMTC/05 pp. 1233-1238
    Konferenciaközlemény (Könyvrészlet) | Tudományos[23933080] [Nyilvános]
    Független, Idéző: 23933080, Kapcsolat: 23933080
  5. Conrad L et al. PRC's strategy for national and global needs to enhance microsystems packaging education. (2001) Megjelent: Advances in Electronic Packaging pp. 1809-1813
    Konferenciaközlemény (Könyvrészlet) | Tudományos[23933081] [Nyilvános]
    Független, Idéző: 23933081, Kapcsolat: 23933081
Illyefalvi-Vitez Zsolt et al. Laser processing for microelectronics packaging applications. (1999) PROCEEDINGS OF SPIE - THE INTERNATIONAL SOCIETY FOR OPTICAL ENGINEERING 0277-786X 1996-756X 3906 586-591, 2612421
Konferenciaközlemény (Folyóiratcikk) | Tudományos[2612421]
  1. Harsányi G et al. Sensors’ Education and Related Student Research Projects. (2000) Megjelent: 50th Electronic Components and Technology Conference: Proceedings pp. 1034-1041
    Konferenciaközlemény (Könyvrészlet) | Tudományos[2611095] [Nyilvános]
    Független, Idéző: 2611095, Kapcsolat: 23928137
Réczey M. Combining Inorganic and Organic Gas Sensor Elements: a New Approach for Multicomponent Sensing. (1999) Megjelent: 12th European Microelectronics and Packaging Conference pp. 189-195, 2611088
Konferenciaközlemény (Könyvrészlet) | Tudományos[2611088]
  1. Kantor Z. Sub-picosecond excimer laser machining of a thick film circuit material. (2004) THIN SOLID FILMS 0040-6090 1879-2731 453 350-352
    Szakcikk (Folyóiratcikk) | Tudományos[2788410] [Nyilvános]
    Független, Idéző: 2788410, Kapcsolat: 26324549
  2. Campos M et al. Gas-Sensitive Characteristics of Metal/Semiconductor Polymer Schottky Device. (2000) SENSORS AND ACTUATORS A-PHYSICAL 0924-4247 1873-3069 87 1-2 67-71
    Szakcikk (Folyóiratcikk) | Tudományos[23923085] [Nyilvános]
    Független, Idéző: 23923085, Kapcsolat: 23923085
Gordon Peter et al. Progress in electronics packaging virtual laboratory development. (2000) Megjelent: 50th Electronic Components and Technology Conference: Proceedings pp. 1293-1299, 2612428
Konferenciaközlemény (Könyvrészlet) | Tudományos[2612428]
  1. Geczy Attila et al. Sensor-based IoT monitoring of Electronics Manufacturing in University Lab Environment. (2021) Megjelent: 2021 IEEE 27th International Symposium for Design and Technology in Electronic Packaging (SIITME) pp. 230-233
    Konferenciaközlemény (Könyvrészlet) | Tudományos[32587545] [Egyeztetett]
    Független, Idéző: 32587545, Kapcsolat: 31554767
  2. Liu JH et al. Implementation of the Internet course on conductive adhesives for electronics packaging. (2002) Megjelent: 52nd IEEE Electronic Components and Technology Conference pp. 1502-1506
    Konferenciaközlemény (Könyvrészlet) | Tudományos[23928141] [Nyilvános]
    Független, Idéző: 23928141, Kapcsolat: 23928141
  3. Doraiswami R et al. Hands-on module packaging education at Georgia Tech. (2002) Megjelent: 52nd IEEE Electronic Components and Technology Conference pp. 1517-1523
    Konferenciaközlemény (Könyvrészlet) | Tudományos[23928142] [Nyilvános]
    Független, Idéző: 23928142, Kapcsolat: 23928142
  4. Wesling P. Electronics packaging education: NSF and IEEE initiatives and modules. (2001) Megjelent: 51ST ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE pp. 388-391
    Konferenciaközlemény (Könyvrészlet) | Tudományos[23928145] [Nyilvános]
    Független, Idéző: 23928145, Kapcsolat: 23928145
  5. Liu JH et al. Development of an Internet course on electrically conductive adhesives with experiments. (2001) Megjelent: 51ST ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE pp. 1270-1275
    Konferenciaközlemény (Könyvrészlet) | Tudományos[23928147] [Nyilvános]
    Független, Idéző: 23928147, Kapcsolat: 23928147
Illyefalvi-Vitéz Zs. Laser processing of adhesives and polymeric materials for microelectronics packaging applications. (2000) Megjelent: 4thInternational Conference on Adhesive Joining and Coating Technology in Electronics Manufacturing pp. 289-295, 2624576
Konferenciaközlemény (Egyéb konferenciaközlemény) | Tudományos[2624576]
  1. Berényi Richárd. Laser Processing of Solder Resist Layers on Laminated Substrates.. (2003) Megjelent: ISSE 2003 : 26th International Spring Seminar on Electronics Technology : conference proceedings pp. 313-316
    Konferenciaközlemény (Könyvrészlet) | Tudományos[2606513] [Nyilvános]
    Független, Idéző: 2606513, Kapcsolat: 23949821
  2. Gordon Péter et al. Laser Processing of Flexible Substrates. (2002) Megjelent: 2nd International IEEE Conference on Polymers and Adhesives in Microelectronics and Photonics pp. 183-187
    Konferenciaközlemény (Könyvrészlet) | Tudományos[2614355] [Nyilvános]
    Független, Idéző: 2614355, Kapcsolat: 23949824
  3. Gordon Péter et al. Laser Processing of Flexible Substrates. (2002) Megjelent: 35th International Symposium on Microelectronics (IMAPS 2002) pp. 494-499
    Konferenciaközlemény (Könyvrészlet) | Tudományos[2614352] [Nyilvános]
    Független, Idéző: 2614352, Kapcsolat: 23949825
Nemeth Pal et al. Review of the reliability of advanced component packaging technologies. (2000) Megjelent: 50th Electronic Components and Technology Conference: Proceedings pp. 1605-1609, 2612429
Konferenciaközlemény (Könyvrészlet) | Tudományos[2612429]
  1. Kang K et al. Signal integrity and reliability of a new multi-stack package using a pressure conductive rubber. (2008) Megjelent: 2008 Electrical Design of Advanced Packaging and Systems Symposium, IEEE EDAPS 2008 - Proceedings pp. 214-217
    Konferenciaközlemény (Könyvrészlet) | Tudományos[23928152] [Nyilvános]
    Független, Idéző: 23928152, Kapcsolat: 23928152
  2. Chilakamarthi G. Influence of Underfill on Ball Grid Array (BGA) Package Fatigue Life. (2004)
    Nem besorolt (Disszertáció) | Tudományos[23928153] [Nyilvános]
    Független, Idéző: 23928153, Kapcsolat: 23928153
Harsányi G et al. SensEdu - an Internet Course for Teaching Sensorics. (2001) IEEE SENSORS JOURNAL 1530-437X 2 1 34-40, 2606617
Konferenciaközlemény (Folyóiratcikk) | Tudományos[2606617]
  1. Pejcic Bobby et al. Environmental Monitoring of Hydrocarbons: A Chemical Sensor Perspective. (2007) ENVIRONMENTAL SCIENCE & TECHNOLOGY 0013-936X 1520-5851 41 18 6333-6342
    Szakcikk (Folyóiratcikk) | Tudományos[32468035] [Nyilvános]
    Független, Idéző: 32468035, Kapcsolat: 30832567
Illyefalvi-Vitez Z. Laser processing for microelectronics packaging applications. (2001) MICROELECTRONICS RELIABILITY 0026-2714 41 4 563-570, 2612431
Szakcikk (Folyóiratcikk) | Tudományos[2612431]
  1. Jian Xiaohua et al. Development of Self-Focusing Piezoelectric Composite Ultrasound Transducer Using Laser Engraving Technology. (2019) IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL 0885-3010 66 12 1866-1873
    Szakcikk (Folyóiratcikk) | Tudományos[31063774] [Egyeztetett]
    Független, Idéző: 31063774, Kapcsolat: 28637584
  2. Berg Yuval et al. Holes generation in glass using large spot femtosecond laser pulses. (2018) JOURNAL OF MICROMECHANICS AND MICROENGINEERING 0960-1317 28 3
    Szakcikk (Folyóiratcikk) | Tudományos[27313960] [Egyeztetett]
    Független, Idéző: 27313960, Kapcsolat: 27313960
  3. Winotapun Charinee et al. Microperforation of Three Common Plastic Films by Laser and Their Enhanced Oxygen Transmission for Fresh Produce Packaging. (2015) PACKAGING TECHNOLOGY AND SCIENCE 0894-3214 1099-1522 28 4 367-383
    Szakcikk (Folyóiratcikk) | Tudományos[24905493] [Nyilvános]
    Független, Idéző: 24905493, Kapcsolat: 24905493
  4. Kim JS et al. Component assembly with shape memory polymer fastener for microrobots. (2014) SMART MATERIALS AND STRUCTURES 0964-1726 1361-665X 23 1
    Folyóiratcikk | Tudományos[23928190] [Nyilvános]
    Független, Idéző: 23928190, Kapcsolat: 23928190
  5. Tůma J et al. Silver nano-structures prepared by oriented evaporation on laser-patterned poly(methyl methacrylate). (2013) JOURNAL OF MATERIALS SCIENCE 0022-2461 1573-4803 48 2 900-905
    Szakcikk (Folyóiratcikk) | Tudományos[23928188] [Nyilvános]
    Független, Idéző: 23928188, Kapcsolat: 23928188
  6. Schutzius TM et al. Superhydrophobic-superhydrophilic binary micropatterns by localized thermal treatment of polyhedral oligomeric silsesquioxane (POSS)-silica films. (2012) NANOSCALE 2040-3364 2040-3372 4 17 5378-5385
    Folyóiratcikk[23928187] [Admin láttamozott]
    Független, Idéző: 23928187, Kapcsolat: 23928187
  7. Kim J et al. Flexible printed circuit boards laser bonding using a laser beam homogenization process. (2012) OPTICS AND LASERS IN ENGINEERING 0143-8166 1873-0302 50 11 1643-1653
    Folyóiratcikk[23928186] [Admin láttamozott]
    Független, Idéző: 23928186, Kapcsolat: 23928186
  8. Majumdar JD et al. Laser material processing. (2011) INTERNATIONAL MATERIALS REVIEWS 0950-6608 1743-2804 56 5-6 341-388
    Összefoglaló cikk (Folyóiratcikk) | Tudományos[21874707] [Egyeztetett]
    Független, Idéző: 21874707, Kapcsolat: 23928172
  9. Bozsóki István et al. 355 nm nanosecond pulsed Nd:YAG laser profile measurement, metal thin film ablation and thermal simulation. (2011) OPTICS AND LASER TECHNOLOGY 0030-3992 1879-2545 43 7 1212-1218
    Szakcikk (Folyóiratcikk) | Tudományos[2663281] [Admin láttamozott]
    Független, Idéző: 2663281, Kapcsolat: 23928173
  10. Berényi Richárd. Prototyping of a reliable 3D flexible IC cube package by laser micromachining. (2009) MICROELECTRONICS RELIABILITY 0026-2714 1872-941X 49 800-805
    Szakcikk (Folyóiratcikk) | Tudományos[2641109] [Admin láttamozott]
    Független, Idéző: 2641109, Kapcsolat: 23928175
  11. Dziedzic A. Modern thick-film and ltcc passives and passive integrated components. (2009) INFORMACIJE MIDEM-JOURNAL OF MICROELECTRONICS ELECTRONIC COMPONENTS AND MATERIALS 0352-9045 0352-9045 39 4 191-200
    Folyóiratcikk[23928183] [Admin láttamozott]
    Független, Idéző: 23928183, Kapcsolat: 23928183
  12. Nowak D et al. Fabrication and electrical properties of laser-shaped thick-film and LTCC microresistors. (2009) MICROELECTRONICS RELIABILITY 0026-2714 1872-941X 49 6 600-606
    Szakcikk (Folyóiratcikk) | Tudományos[23928176] [Nyilvános]
    Független, Idéző: 23928176, Kapcsolat: 23928176
  13. Park JB et al. Evaluation of machinability in the micro end milling of printed circuit boards. (2009) PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE 0954-4054 2041-1975 223 11 1465-1474
    Szakcikk (Folyóiratcikk) | Tudományos[23928174] [Nyilvános]
    Független, Idéző: 23928174, Kapcsolat: 23928174
  14. Berényi Richárd et al. 3D Flexible Package Formation using Laser Micromachining. (2008) PERIODICA POLYTECHNICA-ELECTRICAL ENGINEERING 0324-6000 1587-3781 2064-5260 2064-5279 52 1 39-44
    Szakcikk (Folyóiratcikk) | Tudományos[2614360] [Admin láttamozott]
    Független, Idéző: 2614360, Kapcsolat: 23928185
  15. Wang A H et al. YAG laser percussion drilling of a functional multi-layer thin plate. (2007) OPTICS AND LASER TECHNOLOGY 0030-3992 1879-2545 39 4 840-845
    Folyóiratcikk[23928170] [Admin láttamozott]
    Független, Idéző: 23928170, Kapcsolat: 23928170
  16. Péter Gordon et al. Thermal simulation of UV laser ablation of polyimide. (2007) MICROELECTRONICS RELIABILITY 0026-2714 1872-941X 47 2-3 347-353
    Szakcikk (Folyóiratcikk) | Tudományos[2612702] [Egyeztetett]
    Független, Idéző: 2612702, Kapcsolat: 23928169
  17. Yung W K et al. Nd:YAG laser drilling in epoxy resin/AlN composites material. (2007) COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING 1359-835X 1878-5840 38 9 2055-2064
    Folyóiratcikk[23928171] [Admin láttamozott]
    Független, Idéző: 23928171, Kapcsolat: 23928171
  18. Gordon Péter et al. Thermal Simulation of UV Laser Ablation of Polyimide. (2005) Megjelent: Polytronic 2005: 5th International Conference on Polymers and Adhesives in Microelectronics and Photonics pp. 128-132
    Konferenciaközlemény (Könyvrészlet) | Tudományos[2615966] [Egyeztetett]
    Független, Idéző: 2615966, Kapcsolat: 23928168
  19. Balogh Bálint et al. Simulation and indirect measurement of temperature change in polyimide induced by laser ablation at 355 nm. (2005) Megjelent: 28th IEEE International Spring Seminar on Electronics Technology pp. 412-416
    Konferenciaközlemény (Könyvrészlet) | Tudományos[2615970] [Nyilvános]
    Független, Idéző: 2615970, Kapcsolat: 23928178
  20. Henry M et al. Cutting flexible printed circuit board with a 532NM Q-switched diode pumped solid state laser. (2005) Megjelent: 24th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2005 - Congress Proceedings pp. 412-419
    Konferenciaközlemény (Egyéb konferenciaközlemény) | Tudományos[23928166] [Nyilvános]
    Független, Idéző: 23928166, Kapcsolat: 23928166
  21. Santha H et al. Utilization of laser technologies in the preparation of the physical structure of a miniature electrochemical cell used for biosensor researches. (2004) Megjelent: Polytronics 2004 pp. 257-261
    Konferenciaközlemény (Könyvrészlet) | Tudományos[2606535] [Nyilvános]
    Független, Idéző: 2606535, Kapcsolat: 23928162
  22. Li C -H et al. Cutting for QFN packaging by diode pumping solid state laser system. (2004) Megjelent: 2004 Semiconductor Manufacturing Technology Workshop Proceedings, SMTW pp. 123-126
    Konferenciaközlemény (Egyéb konferenciaközlemény) | Tudományos[23928163] [Nyilvános]
    Független, Idéző: 23928163, Kapcsolat: 23928163
  23. Theppakuttai S et al. Nanoscale surface modification of glass using a 1064 nm pulsed laser. (2003) APPLIED PHYSICS LETTERS 0003-6951 1077-3118 83 4 758-760
    Folyóiratcikk[23928160] [Admin láttamozott]
    Független, Idéző: 23928160, Kapcsolat: 23928160
  24. Berényi Richárd. Laser Processing of Solder Resist Layers on Laminated Substrates.. (2003) Megjelent: ISSE 2003 : 26th International Spring Seminar on Electronics Technology : conference proceedings pp. 313-316
    Konferenciaközlemény (Könyvrészlet) | Tudományos[2606513] [Nyilvános]
    Független, Idéző: 2606513, Kapcsolat: 23928179
  25. Majumdar J D et al. Laser processing of materials. (2003) SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES 0256-2499 0973-7677 28 3-4 495-562
    Szakcikk (Folyóiratcikk) | Tudományos[23928159] [Nyilvános]
    Független, Idéző: 23928159, Kapcsolat: 23928159
  26. Gordon Péter et al. Controlled Laser Ablation of Polyimide Substrates. (2003) Megjelent: Proceedings of SPIE - The International Society for Optical Engineering pp. 725-730
    Konferenciaközlemény (Könyvrészlet) | Tudományos[2614351] [Nyilvános]
    Független, Idéző: 2614351, Kapcsolat: 23928161
  27. Yasuda K et al. Thermal analysis and quality prediction of via hole drilled on Si device by short pulse laser. (2002) Megjelent: Proceedings of SPIE - The International Society for Optical Engineering pp. 79-84
    Konferenciaközlemény (Könyvrészlet) | Tudományos[23928157] [Nyilvános]
    Független, Idéző: 23928157, Kapcsolat: 23928157
  28. Gordon Péter et al. Laser Processing of Flexible Substrates. (2002) Megjelent: 35th International Symposium on Microelectronics (IMAPS 2002) pp. 494-499
    Konferenciaközlemény (Könyvrészlet) | Tudományos[2614352] [Nyilvános]
    Független, Idéző: 2614352, Kapcsolat: 23928155
  29. Gordon Péter et al. Laser Processing of Flexible Substrates. (2002) Megjelent: 2nd International IEEE Conference on Polymers and Adhesives in Microelectronics and Photonics pp. 183-187
    Konferenciaközlemény (Könyvrészlet) | Tudományos[2614355] [Nyilvános]
    Független, Idéző: 2614355, Kapcsolat: 23928181
  30. Strgar S et al. An optodynamic method for the real-time determination of the depth of a laser-drilled hole. (2002) APPLIED PHYSICS A - MATERIALS SCIENCE AND PROCESSING 0947-8396 1432-0630 74 2 321-323
    Folyóiratcikk[23928156] [Admin láttamozott]
    Független, Idéző: 23928156, Kapcsolat: 23928156
Illyefalvi-Vitéz Zsolt. How to Teach Electronics Packaging Technology?. (2001) Megjelent: 24th International Spring Seminar on Electronics Technology, Calimanesti – Caciulata, Romania pp. 7-12, 2625912
Konferenciaközlemény (Könyvrészlet) | Tudományos[2625912]
  1. Kokko Kati. Yliopisto-opetuksen kehittäminen: Elektroniikan alan opetussuunnitelmatyö. (2010)
    Egyéb[23952796] [Nyilvános]
    Független, Idéző: 23952796, Kapcsolat: 23952796
Illyefalvi-Vitez Zsolt et al. Laser Via Generation into Flexible Substrates. (2001) Megjelent: First IEEE Polytronic Conference on Polymers and Adhesives in Microelectronics and Photonics. pp. 230-235, 1461790
Konferenciaközlemény (Egyéb konferenciaközlemény) | Tudományos[1461790]
  1. Lai J. Laser bonding of multilayer polymer microfluidic chips. (2004) Megjelent: Conference on Semiconductor Lasers and Applications II pp. 56-62
    Konferenciaközlemény (Egyéb konferenciaközlemény) | Tudományos[25465850] [Admin láttamozott]
    Független, Idéző: 25465850, Kapcsolat: 25465850
Illyefalvi-Vitez Zs et al. Failure and acceleration models for MCM-Ls tested by HAST. (2002) Megjelent: 52nd IEEE Electronic Components and Technology Conference pp. 480-483, 2612443
Konferenciaközlemény (Könyvrészlet) | Tudományos[2612443]
  1. Lambert D et al. Fuse regrowth kinetics. (2004) IEEE TRANSACTIONS ON DEVICE AND MATERIALS RELIABILITY 1530-4388 4 4 690-695
    Folyóiratcikk[23928195] [Admin láttamozott]
    Független, Idéző: 23928195, Kapcsolat: 23928195
  2. Lambert D et al. Dendrite fuse re-growth kinetics on organic substrates for microprocessors. (2004) Megjelent: Annual Proceedings - Reliability Physics (Symposium) pp. 543-546
    Konferenciaközlemény (Egyéb konferenciaközlemény) | Tudományos[23928196] [Nyilvános]
    Független, Idéző: 23928196, Kapcsolat: 23928196
Tzanova S et al. Internet-based performance centered instruction - The link between work and education and microelectronics. (2003) Megjelent: 53RD ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE, 2003 PROCEEDINGS pp. 498-502, 2612445
Konferenciaközlemény (Könyvrészlet) | Tudományos[2612445]
  1. Tokmakov D et al. PERFORMANCE-CENTERED APPROACH FOR ADAPTIVE CURRICULUM FOR EMPLOYMENT NEEDS. (2012) Megjelent: INTED2012: INTERNATIONAL TECHNOLOGY, EDUCATION AND DEVELOPMENT CONFERENCE pp. 204-210
    Konferenciaközlemény (Egyéb konferenciaközlemény) | Tudományos[23928197] [Nyilvános]
    Független, Idéző: 23928197, Kapcsolat: 23928197
Illyefalvi-Vitez Z et al. Distance learning - How to use this new didactic Method in education of electronics engineering?. (2004) Megjelent: Proceedings - Electronic Components and Technology Conference pp. 1725-1730, 2612449
Konferenciaközlemény (Könyvrészlet) | Tudományos[2612449]
  1. Vodovozov V et al. DISTANCE CONTROL OF ELECTRIC DRIVES AND POWER CONVERTERS VIA INTERNET: CONCEPT OF E-LABORATORY. (2009) Megjelent: EUROCON 2009: INTERNATIONAL IEEE CONFERENCE DEVOTED TO THE 150 ANNIVERSARY OF ALEXANDER S. POPOV, VOLS 1- 4, PROCEEDINGS pp. 791-796
    Konferenciaközlemény (Könyvrészlet) | Tudományos[23928198] [Nyilvános]
    Független, Idéző: 23928198, Kapcsolat: 23928198
  2. Garcia P A et al. Use of online learning and new evaluation techniques for the reduction of specific conceptual shortcomings in basic disciplines for students of engineering courses, using Moodle. (2008) Megjelent: Proceedings of the 2008 International Conference on Frontiers in Education: Computer Science and Computer Engineering, FECS 2008 pp. 117-123
    Konferenciaközlemény (Könyvrészlet) | Tudományos[23928200] [Nyilvános]
    Független, Idéző: 23928200, Kapcsolat: 23928200
Illyefalvi-Vitéz Zs et al. Analysis of distance learning courses offered by the EuroTraining course directory. (2005) Megjelent: 55th IEEE Electronic Components and Technology Conference pp. 1909-1915, 2611231
Konferenciaközlemény (Könyvrészlet) | Tudományos[2611231]
  1. SW Turner M. Towards a flipped cyber classroom to facilitate active learning strategies. (2015) Megjelent: 2015 IEEE Frontiers in Education Conference (FIE)
    Konferenciaközlemény (Könyvrészlet) | Tudományos[27445571] [Nyilvános]
    Független, Idéző: 27445571, Kapcsolat: 27445571
  2. Pisazo A et al. An experience on e-learning in renewable energy: design and control of photovoltaic plants. (2009) Megjelent: E-Learning in Industrial Electronics, 2009. ICELIE '09. 3rd IEEE International Conference on pp. 135-140
    Konferenciaközlemény (Egyéb konferenciaközlemény) | Tudományos[23923141] [Nyilvános]
    Független, Idéző: 23923141, Kapcsolat: 23923141
Illyefalvi-Vitez Zs et al. Present status of transition to Pb-free soldering. (2005) Megjelent: 28th IEEE International Spring Seminar on Electronics Technology pp. 88-93, 2612453
Konferenciaközlemény (Könyvrészlet) | Tudományos[2612453]
  1. Rusdi M. S. et al. Solder Paste’s Rheology Data for Stencil Printing Numerical Investigations. (2022) Megjelent: Recent Progress in Lead-Free Solder Technology pp. 299-310
    Könyvfejezet (Könyvrészlet) | Tudományos[32716729] [Nyilvános]
    Független, Idéző: 32716729, Kapcsolat: 31161495
  2. Tareq Al-Ma’aiteh. INVESTIGATION OF PIN-IN-PASTE TECHNOLOGY BY NUMERICAL MODELLING. (2022)
    PhD (Disszertáció) | Tudományos[32785721] [Admin láttamozott]
    Független, Idéző: 32785721, Kapcsolat: 31245484
  3. Csaba Farkas et al. Biodegradable and nanocomposite substrates: new prospects for sustainable electronics packaging. (2022)
    Nem besorolt (Egyéb) | Tudományos[33332478] [Nyilvános]
    Független, Idéző: 33332478, Kapcsolat: 32523163
  4. Geczy Attila et al. Biodegradable and nanocomposite materials as printed circuit substrates: a mini-review. (2022) IEEE OPEN JOURNAL OF NANOTECHNOLOGY 2644-1292 3 182-190
    Összefoglaló cikk (Folyóiratcikk) | Tudományos[33225964] [Egyeztetett]
    Független, Idéző: 33225964, Kapcsolat: 31890600
  5. Mohamed Amine Alaya. Investigation of the Process of Vapour Phase Soldering with Applied Sensors. (2021)
    PhD (Disszertáció) | Tudományos[32119830] [Nyilvános]
    Független, Idéző: 32119830, Kapcsolat: 30229315
  6. Erer Ahmet Mustafa et al. Wetting characteristic of Sn-(3-x)Ag-0.5Cu-xBi quaternary solder alloy systems. (2020) SOLDERING & SURFACE MOUNT TECHNOLOGY 0954-0911 32 1 19-23
    Szakcikk (Folyóiratcikk) | Tudományos[30801027] [Nyilvános]
    Független, Idéző: 30801027, Kapcsolat: 28301741
  7. Rusdi M. S. et al. Lead-free solder SAC 305 Volume Reduction and Cold Slump after Stencil Printing Process. (2020) IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING 1757-8981 1757-899X 852 p. 012084
    Szakcikk (Folyóiratcikk) | Tudományos[31389765] [Nyilvános]
    Független, Idéző: 31389765, Kapcsolat: 29087220
  8. Al-Ma'aiteh Tareq et al. Particle Level Modelling of Solder Pastes Rheological Behaviour in Viscosity Measurement. (2019) Megjelent: 2019 42ND INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE) pp. 1-6
    Konferenciaközlemény (Könyvrészlet) | Tudományos[30774756] [Egyeztetett]
    Független, Idéző: 30774756, Kapcsolat: 28270672
  9. Al-Ma’aiteh Tareq I. et al. Non-Newtonian numerical modelling of solder paste viscosity measurement. (2019) SOLDERING & SURFACE MOUNT TECHNOLOGY 0954-0911 1758-6836 31 3 176-180
    Szakcikk (Folyóiratcikk) | Tudományos[30702782] [Egyeztetett]
    Független, Idéző: 30702782, Kapcsolat: 28190246
  10. Martinek Peter et al. Measuring Component Self-Alignment by Automatic Image Processing Method. (2019) Megjelent: 2019 42ND INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE) pp. 1-5
    Konferenciaközlemény (Könyvrészlet) | Tudományos[30774813] [Admin láttamozott]
    Független, Idéző: 30774813, Kapcsolat: 28270749
  11. Krammer Oliver et al. Investigating the Effect of Viscosity Models on the Stencil Printing by Numerical Modelling. (2019) Megjelent: 2019 42ND INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE) pp. 1-6
    Konferenciaközlemény (Könyvrészlet) | Tudományos[30774788] [Egyeztetett]
    Független, Idéző: 30774788, Kapcsolat: 28270712
2023-12-05 20:57